| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250308-sar2130p-display-v1-5-1d4c30f43822@linaro.org>
Date: Sat, 08 Mar 2025 03:42:23 +0200
From: Dmitry Baryshkov <lumag@...nel.org>
To: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <lumag@...nel.org>, Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Kuogee Hsieh <quic_khsieh@...cinc.com>,
Krishna Manikandan <quic_mkrishn@...cinc.com>,
Jonathan Marek <jonathan@...ek.ca>, Bjorn Andersson <andersson@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>, Will Deacon <will@...nel.org>,
Robin Murphy <robin.murphy@....com>, Joerg Roedel <joro@...tes.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, iommu@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Describe the Mobile Display SubSystem (MDSS) device present on the
Qualcomm SAR2130P platform. It looks pretty close to SM8550 on the
system level. SAR2130P features two DSI hosts and single DisplayPort
controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
.../bindings/display/msm/qcom,sar2130p-mdss.yaml | 445 +++++++++++++++++++++
1 file changed, 445 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..0dbf6704c44dc6a752a22e83dc7a4f8c70665390
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml
@@ -0,0 +1,445 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sar2130p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SAR2130P Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <lumag@...nel.org>
+
+description:
+ SAR2310P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sar2130p-mdss
+
+ clocks:
+ items:
+ - description: Display MDSS AHB
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sar2130p-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sar2130p-dp
+ - const: qcom,sm8350-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sar2130p-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sar2130p-dsi-phy-5nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ #include <dt-bindings/phy/phy-qcom-qmp.h>
+
+ display-subsystem@...0000 {
+ compatible = "qcom,sar2130p-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc_master_mdp &mc_virt_slave_ebi1>,
+ <&gem_noc_master_appss_proc &config_noc_slave_display_cfg>;
+ interconnect-names = "mdp0-mem", "cpu-cfg";
+
+ resets = <&dispcc_disp_cc_mdss_core_bcr>;
+
+ power-domains = <&dispcc_mdss_gdsc>;
+
+ clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+ <&gcc_gcc_disp_ahb_clk>,
+ <&gcc_gcc_disp_hf_axi_clk>,
+ <&dispcc_disp_cc_mdss_mdp_clk>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@...1000 {
+ compatible = "qcom,sar2130p-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc_gcc_disp_ahb_clk>,
+ <&gcc_gcc_disp_hf_axi_clk>,
+ <&dispcc_disp_cc_mdss_ahb_clk>,
+ <&dispcc_disp_cc_mdss_mdp_lut_clk>,
+ <&dispcc_disp_cc_mdss_mdp_clk>,
+ <&dispcc_disp_cc_mdss_vsync_clk>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc_disp_cc_mdss_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ displayport-controller@...0000 {
+ compatible = "qcom,sar2130p-dp",
+ "qcom,sm8350-dp";
+ reg = <0xae90000 0x200>,
+ <0xae90200 0x200>,
+ <0xae90400 0xc00>,
+ <0xae91000 0x400>,
+ <0xae91400 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+ clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+ <&dispcc_disp_cc_mdss_dptx0_aux_clk>,
+ <&dispcc_disp_cc_mdss_dptx0_link_clk>,
+ <&dispcc_disp_cc_mdss_dptx0_link_intf_clk>,
+ <&dispcc_disp_cc_mdss_dptx0_pixel0_clk>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc_disp_cc_mdss_dptx0_link_clk_src>,
+ <&dispcc_disp_cc_mdss_dptx0_pixel0_clk_src>;
+ assigned-clock-parents = <&usb_dp_qmpphy_QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy_QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dp0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dp0_out: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+ };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-162000000 {
+ opp-hz = /bits/ 64 <162000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@...4000 {
+ compatible = "qcom,sar2130p-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc_disp_cc_mdss_byte0_clk>,
+ <&dispcc_disp_cc_mdss_byte0_intf_clk>,
+ <&dispcc_disp_cc_mdss_pclk0_clk>,
+ <&dispcc_disp_cc_mdss_esc0_clk>,
+ <&dispcc_disp_cc_mdss_ahb_clk>,
+ <&gcc_gcc_disp_hf_axi_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc_disp_cc_mdss_byte0_clk_src>,
+ <&dispcc_disp_cc_mdss_pclk0_clk_src>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@...4400 {
+ compatible = "qcom,sar2130p-dsi-phy-5nm";
+ reg = <0x0ae95000 0x200>,
+ <0x0ae95200 0x280>,
+ <0x0ae95500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+ <&rpmhcc_rpmh_cxo_clk>;
+ clock-names = "iface", "ref";
+ };
+
+ dsi@...6000 {
+ compatible = "qcom,sar2130p-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc_disp_cc_mdss_byte1_clk>,
+ <&dispcc_disp_cc_mdss_byte1_intf_clk>,
+ <&dispcc_disp_cc_mdss_pclk1_clk>,
+ <&dispcc_disp_cc_mdss_esc1_clk>,
+ <&dispcc_disp_cc_mdss_ahb_clk>,
+ <&gcc_gcc_disp_hf_axi_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc_disp_cc_mdss_byte1_clk_src>,
+ <&dispcc_disp_cc_mdss_pclk1_clk_src>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@...7000 {
+ compatible = "qcom,sar2130p-dsi-phy-5nm";
+ reg = <0x0ae97000 0x200>,
+ <0x0ae97200 0x280>,
+ <0x0ae97500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+ <&rpmhcc_rpmh_cxo_clk>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
--
2.39.5
Powered by blists - more mailing lists