linux-kernel - [PATCH 4/5] iio: adc: ad4030: don't store scan

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250310-iio-adc-ad4030-check-scan-type-err-v1-4-589e4ebd9711@baylibre.com>
Date: Mon, 10 Mar 2025 15:43:07 -0500
From: David Lechner <dlechner@...libre.com>
To: Lars-Peter Clausen <lars@...afoo.de>, 
 Michael Hennerich <Michael.Hennerich@...log.com>, 
 Nuno Sá <nuno.sa@...log.com>, 
 Esteban Blanc <eblanc@...libre.com>, Jonathan Cameron <jic23@...nel.org>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org, 
 David Lechner <dlechner@...libre.com>
Subject: [PATCH 4/5] iio: adc: ad4030: don't store scan_type in state

Move getting the scan_type to ad4030_conversion(). Previously, we were
getting the scan_type in two other places, then storing it in the
state struct before using it in ad4030_conversion(). This was a bit
fragile against potential future changes since it isn't obvious that
anything that could potentially change the scan_type would need to
also update the state struct. Also, the non-obviousness of this led to
a redundant call to iio_get_current_scan_type() in
ad4030_single_conversion() since it also calls ad4030_set_mode() which
in turn calls ad4030_conversion().

To simplify things, just call iio_get_current_scan_type() in
ad4030_conversion() where the returned struct is actually used and
don't bother storing it in the state struct.

Signed-off-by: David Lechner <dlechner@...libre.com>
---
 drivers/iio/adc/ad4030.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

diff --git a/drivers/iio/adc/ad4030.c b/drivers/iio/adc/ad4030.c
index c2117c7a296f22aeeec6911c8a8c74ed576296a0..54ad74b96c9f256a67848330f875379edc828b0b 100644
--- a/drivers/iio/adc/ad4030.c
+++ b/drivers/iio/adc/ad4030.c
@@ -147,7 +147,6 @@ struct ad4030_state {
 	struct spi_device *spi;
 	struct regmap *regmap;
 	const struct ad4030_chip_info *chip;
-	const struct iio_scan_type *current_scan_type;
 	struct gpio_desc *cnv_gpio;
 	int vref_uv;
 	int vio_uv;
@@ -562,11 +561,6 @@ static int ad4030_set_mode(struct iio_dev *indio_dev, unsigned long mask)
 		st->mode = AD4030_OUT_DATA_MD_DIFF;
 	}
 
-	st->current_scan_type = iio_get_current_scan_type(indio_dev,
-							  st->chip->channels);
-	if (IS_ERR(st->current_scan_type))
-		return PTR_ERR(st->current_scan_type);
-
 	return regmap_update_bits(st->regmap, AD4030_REG_MODES,
 				  AD4030_REG_MODES_MASK_OUT_DATA_MODE,
 				  st->mode);
@@ -614,15 +608,20 @@ static void ad4030_extract_interleaved(u8 *src, u32 *ch0, u32 *ch1)
 static int ad4030_conversion(struct iio_dev *indio_dev)
 {
 	struct ad4030_state *st = iio_priv(indio_dev);
-	unsigned char diff_realbytes =
-		BITS_TO_BYTES(st->current_scan_type->realbits);
-	unsigned char diff_storagebytes =
-		BITS_TO_BYTES(st->current_scan_type->storagebits);
+	const struct iio_scan_type *scan_type;
+	unsigned char diff_realbytes, diff_storagebytes;
 	unsigned int bytes_to_read;
 	unsigned long cnv_nb = BIT(st->avg_log2);
 	unsigned int i;
 	int ret;
 
+	scan_type = iio_get_current_scan_type(indio_dev, st->chip->channels);
+	if (IS_ERR(scan_type))
+		return PTR_ERR(scan_type);
+
+	diff_realbytes = BITS_TO_BYTES(scan_type->realbits);
+	diff_storagebytes = BITS_TO_BYTES(scan_type->storagebits);
+
 	/* Number of bytes for one differential channel */
 	bytes_to_read = diff_realbytes;
 	/* Add one byte if we are using a differential + common byte mode */
@@ -673,11 +672,6 @@ static int ad4030_single_conversion(struct iio_dev *indio_dev,
 	if (ret)
 		return ret;
 
-	st->current_scan_type = iio_get_current_scan_type(indio_dev,
-							  st->chip->channels);
-	if (IS_ERR(st->current_scan_type))
-		return PTR_ERR(st->current_scan_type);
-
 	ret = ad4030_conversion(indio_dev);
 	if (ret)
 		return ret;

-- 
2.43.0