linux-kernel - [PATCH net-next V2 2/2] net: axienet: Add support for 2500base-X only configuration.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250312095411.1392379-3-suraj.gupta2@amd.com>
Date: Wed, 12 Mar 2025 15:24:11 +0530
From: Suraj Gupta <suraj.gupta2@....com>
To: <radhey.shyam.pandey@....com>, <andrew+netdev@...n.ch>,
	<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
	<pabeni@...hat.com>, <robh@...nel.org>, <krzk+dt@...nel.org>,
	<conor+dt@...nel.org>, <michal.simek@....com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<git@....com>, <harini.katakam@....com>
Subject: [PATCH net-next V2 2/2] net: axienet: Add support for 2500base-X only configuration.

AXI 1G/2.5G ethernet IP has following synthesis options:
1) SGMII/1000base-X only.
2) 2500base-X only.
3) dynamically switching between (1) and (2).
Add support for 2500base-X only configuration.

Co-developed-by: Harini Katakam <harini.katakam@....com>
Signed-off-by: Harini Katakam <harini.katakam@....com>
Signed-off-by: Suraj Gupta <suraj.gupta2@....com>
---
 drivers/net/ethernet/xilinx/xilinx_axienet.h  |  2 +-
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 24 +++++++++++++++----
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 5ff742103beb..ded3e32999d5 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -274,7 +274,7 @@
 #define XAE_EMMC_RX16BIT	0x01000000 /* 16 bit Rx client enable */
 #define XAE_EMMC_LINKSPD_10	0x00000000 /* Link Speed mask for 10 Mbit */
 #define XAE_EMMC_LINKSPD_100	0x40000000 /* Link Speed mask for 100 Mbit */
-#define XAE_EMMC_LINKSPD_1000	0x80000000 /* Link Speed mask for 1000 Mbit */
+#define XAE_EMMC_LINKSPD_1000_2500	0x80000000 /* Link Speed mask for 1000 or 2500 Mbit */
 
 /* Bit masks for Axi Ethernet PHYC register */
 #define XAE_PHYC_SGMIILINKSPEED_MASK	0xC0000000 /* SGMII link speed mask*/
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 054abf283ab3..0885ce201b0a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2583,6 +2583,7 @@ static struct phylink_pcs *axienet_mac_select_pcs(struct phylink_config *config,
 	struct axienet_local *lp = netdev_priv(ndev);
 
 	if (interface == PHY_INTERFACE_MODE_1000BASEX ||
+	    interface == PHY_INTERFACE_MODE_2500BASEX ||
 	    interface ==  PHY_INTERFACE_MODE_SGMII)
 		return &lp->pcs;
 
@@ -2616,8 +2617,9 @@ static void axienet_mac_link_up(struct phylink_config *config,
 	emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
 
 	switch (speed) {
+	case SPEED_2500:
 	case SPEED_1000:
-		emmc_reg |= XAE_EMMC_LINKSPD_1000;
+		emmc_reg |= XAE_EMMC_LINKSPD_1000_2500;
 		break;
 	case SPEED_100:
 		emmc_reg |= XAE_EMMC_LINKSPD_100;
@@ -2627,7 +2629,7 @@ static void axienet_mac_link_up(struct phylink_config *config,
 		break;
 	default:
 		dev_err(&ndev->dev,
-			"Speed other than 10, 100 or 1Gbps is not supported\n");
+			"Speed other than 10, 100, 1Gbps or 2.5Gbps is not supported\n");
 		break;
 	}
 
@@ -3055,7 +3057,8 @@ static int axienet_probe(struct platform_device *pdev)
 			 "error registering MDIO bus: %d\n", ret);
 
 	if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII ||
-	    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
+	    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX ||
+	    lp->phy_mode == PHY_INTERFACE_MODE_2500BASEX) {
 		np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
 		if (!np) {
 			/* Deprecated: Always use "pcs-handle" for pcs_phy.
@@ -3083,8 +3086,19 @@ static int axienet_probe(struct platform_device *pdev)
 	lp->phylink_config.dev = &ndev->dev;
 	lp->phylink_config.type = PHYLINK_NETDEV;
 	lp->phylink_config.mac_managed_pm = true;
-	lp->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
-		MAC_10FD | MAC_100FD | MAC_1000FD;
+	lp->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
+
+	/* AXI 1G/2.5G ethernet IP has following synthesis options:
+	 * 1) SGMII/1000base-X only.
+	 * 2) 2500base-X only.
+	 * 3) Dynamically switching between (1) and (2), and is not
+	 * implemented in driver.
+	 */
+
+	if (axienet_ior(lp, XAE_ABILITY_OFFSET) & XAE_ABILITY_2_5G)
+		lp->phylink_config.mac_capabilities |= MAC_2500FD;
+	else
+		lp->phylink_config.mac_capabilities |= MAC_10FD | MAC_100FD | MAC_1000FD;
 
 	__set_bit(lp->phy_mode, lp->phylink_config.supported_interfaces);
 	if (lp->switch_x_sgmii) {
-- 
2.25.1