[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <5d612c0e-4cd4-469a-9856-dd4552d74412@ti.com>
Date: Wed, 12 Mar 2025 19:13:57 +0530
From: Vignesh Raghavendra <vigneshr@...com>
To: Olof Johansson <olof@...om.net>, Arnd Bergmann <arnd@...db.de>,
arm-soc
<arm@...nel.org>, SoC <soc@...nel.org>
CC: Tero Kristo <kristo@...nel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Nishanth Menon <nm@...com>
Subject: [GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.15
Hi ARM SoC Maintainers,
The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b:
Linux 6.14-rc1 (2025-02-02 15:39:26 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.15
for you to fetch changes up to 377fde74eae4abcbcd5475676d58fb595a07ff85:
arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style (2025-03-07 18:48:05 +0530)
----------------------------------------------------------------
TI K3 device tree updates for v6.15
Generic Fixups/Cleanups:
SoC Specific features and Fixes:
AM62Ax:
Enable MCU domain pinctrl node
J784S4/J742S4:
GICD reg size fixes
Serdes lane ctrl reg mux mask fix
AM62P/J722s:
Wakeup UART0 sysc updates for system wakeup
pinctrl node fixes drop pinctrl-single,gpio-ranges
BCDMA CSI-RX support
Audio REFCLKx output support
Board Specific:
J784S4:
EVM: Cleanup duplicate gpio-hogs
J722S:
TypeC port mux selection fix
AM62Ax
SK: boot-phase tag to support USB bootmode
RTC support
Aliases for wakeup and MCU serial UARTs
AM62P
SK: boot-phase tag to support USB bootmode
USB wakeup support
Aliases for wakeup and MCU serial UARTs
AM62:
verdin-dahila: microphone support
SK: Aliases for wakeup and MCU serial UARTs
BeaglePlay: reserved CMA region for Multimedia applications
J721e:
SK/EVM: boot-phase tags for Serdes for DFU boot
Phytech board updates:
Boot-phase tag updates for AM64/AM62/AM62A boards
DTS coding style cleanups
RTOS IPC reserved-memory additions
DT overlay for X27 Connectors on AM64 SOMs
J721S2 SOM:
Add flash partitions
----------------------------------------------------------------
Daniel Schultz (1):
arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector
Francesco Dolcini (1):
arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx
Hrushikesh Salunke (1):
arm64: dts: ti: k3-j722s-evm: Fix USB2.0_MUX_SEL to select Type-C
Jayesh Choudhary (1):
arm64: dts: ti: k3-j784s4-evm-quad-port-eth-exp1: Remove duplicate hogs
Keerthy (1):
arm64: dts: ti: k3-j784s4-j742s2-main-common: Correct the GICD size
Markus Schneider-Pargmann (2):
arm64: dts: ti: k3-am62x-sk-common: Add serial aliases
arm64: dts: ti: k3-am62a7-sk: Add serial alias
Michael Walle (2):
arm64: dts: ti: k3-am62p: fix pinctrl settings
arm64: dts: ti: k3-j722s: fix pinctrl settings
Nishanth Menon (1):
arm64: dts: ti: k3-am625-beagleplay: Reserve 128MiB of global CMA
Sai Sree Kartheek Adivi (1):
arm64: dts: ti: k3-am62a-mcu: enable mcu domain pinmux
Siddharth Vadapalli (6):
arm64: dts: ti: k3-am62a7-sk: Add boot phase tag for USB0
arm64: dts: ti: k3-am62p5-sk: Add boot phase tag for USB0
arm64: dts: ti: k3-j721e-common-proc-board: Add boot phase tag to SERDES3
arm64: dts: ti: k3-j721e-sk: Add boot phase tag to SERDES3
arm64: dts: ti: k3-am62p5-sk: Support SoC wakeup using USB1 wakeup
arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks
Stefan Eichenberger (1):
arm64: dts: ti: k3-am62-verdin-dahlia: add Microphone Jack to sound card
Udit Kumar (1):
arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details
Vaishnav Achath (3):
arm64: dts: ti: k3-j722s-main: Add BCDMA CSI overrides
arm64: dts: ti: k3-j722s-main: Add CSI2RX nodes
arm64: dts: ti: k3-j722s-evm: Add camera peripherals
Vibhore Vardhan (3):
arm64: dts: ti: k3-am62a7-sk: Add alias for RTC
arm64: dts: ti: k3-am62p-j722s-common-wakeup: Configure ti-sysc for wkup_uart0
arm64: dts: ti: k3-am62p5-sk: Add serial alias
Wadim Egorov (7):
arm64: dts: ti: k3-am64-phycore-som: Reserve RTOS IPC memory
arm64: dts: ti: k3-am62-phycore-som: Reserve RTOS IPC memory
arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags
arm64: dts: ti: k3-am62a-phycore-som: Add boot phase tags
arm64: dts: ti: k3-am642-phyboard-electra: Add boot phase tags
arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style
arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style
arch/arm64/boot/dts/ti/Makefile | 3 +
arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 25 +-
arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 8 +
arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 19 +-
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 4 +
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi | 8 -
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi | 36 +-
arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 26 +-
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 4 +-
arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi | 9 +
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 +
arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 33 +-
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 19 +-
.../ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso | 63 +++
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 41 ++
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 30 +-
arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 208 +++++++++-
arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso | 7 -
arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 6 +-
23 files changed, 488 insertions(+), 72 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
--
Regards
Vignesh
https://ti.com/opensource
Powered by blists - more mailing lists