[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Z9LrOY27J47WfdPv@lizhi-Precision-Tower-5810>
Date: Thu, 13 Mar 2025 10:27:05 -0400
From: Frank Li <Frank.li@....com>
To: Bjorn Helgaas <helgaas@...nel.org>
Cc: Rob Herring <robh@...nel.org>, Saravana Kannan <saravanak@...gle.com>,
Jingoo Han <jingoohan1@...il.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Richard Zhu <hongxing.zhu@....com>,
Lucas Stach <l.stach@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev,
Niklas Cassel <cassel@...nel.org>
Subject: Re: [PATCH v10 09/10] PCI: dwc: ep: Ensure proper iteration over
outbound map windows
On Wed, Mar 12, 2025 at 04:47:00PM -0500, Bjorn Helgaas wrote:
> On Mon, Mar 10, 2025 at 04:16:47PM -0400, Frank Li wrote:
> > Most systems' PCIe outbound map windows have non-zero physical addresses,
> > but the possibility of encountering zero increased with commit
> > ("PCI: dwc: ep: Add bus_addr_base for outbound window").
>
> What is this commit? I don't see it in the tree, and I don't see it
> in this series.
Sorry, it refer to old version of this series. It should be
PCI: dwc: Use parent_bus_offset
>
> It look like it might be a fixup for something in this series. In
> that case it should go *before* the other commit (or be squashed into
> it if it's logically part of it).
Yes it should before PCI: dwc: Use parent_bus_offset to support bisect.
>
> I don't think this series touches ep->ob_window_map, so if it's a fix
> it looks like it could go anywhere earlier.
dw_pcie_ep_outbound_atu() touch ob_window_map.
Frank
>
> > 'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on
> > some hardware, which trims high address bits through bus fabric before
> > sending to the PCIe controller.
> >
> > Replace the iteration logic with 'for_each_set_bit()' to ensure only
> > allocated map windows are iterated when determining the ATU index from a
> > given address.
> >
> > Signed-off-by: Frank Li <Frank.Li@....com>
> > ---
> > change from v9 to v10
> > - remove commit hash value
> >
> > change from v8 to v9
> > - new patch
> > ---
> > drivers/pci/controller/dwc/pcie-designware-ep.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index 62bc71ad20719..e333855633a77 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -282,7 +282,7 @@ static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr,
> > u32 index;
> > struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> >
> > - for (index = 0; index < pci->num_ob_windows; index++) {
> > + for_each_set_bit(index, ep->ob_window_map, pci->num_ob_windows) {
> > if (ep->outbound_addr[index] != addr)
> > continue;
> > *atu_index = index;
> >
> > --
> > 2.34.1
> >
Powered by blists - more mailing lists