| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250313-b4-linux-next-25-03-13-dtsi-x1e80100-camss-v5-4-846c9a6493a8@linaro.org>
Date: Thu, 13 Mar 2025 21:43:16 +0000
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Robert Foss <rfoss@...nel.org>,
Todor Tomov <todor.too@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
Subject: [PATCH v5 4/5] arm64: dts: qcom: x1e80100: Add CCI definitions
Add in two CCI busses.
One bus has two CCI bus master pinouts:
cci_i2c_sda0 = gpio101
cci_i2c_scl0 = gpio102
cci_i2c_sda1 = gpio103
cci_i2c_scl1 = gpio104
The second bus has two CCI bus master pinouts:
cci_i2c_sda2 = gpio105
cci_i2c_scl2 = gpio106
aon_cci_i2c_sda3 = gpio235
aon_cci_i2c_scl3 = gpio236
Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 150 +++++++++++++++++++++++++++++++++
1 file changed, 150 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 065a219e69c632eca288c9ade001949e37b92173..4ae0f67a634a982143df7aa933ec4de697f357a5 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -5117,6 +5117,84 @@ usb_1_ss1_dwc3_ss: endpoint {
};
};
+ cci0: cci@...5000 {
+ compatible = "qcom,x1e80100-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac15000 0 0x1000>;
+
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ pinctrl-0 = <&cci0_default>;
+ pinctrl-1 = <&cci0_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@...6000 {
+ compatible = "qcom,x1e80100-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac16000 0 0x1000>;
+
+ interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ pinctrl-0 = <&cci1_default>;
+ pinctrl-1 = <&cci1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camcc: clock-controller@...0000 {
compatible = "qcom,x1e80100-camcc";
reg = <0 0x0ade0000 0 0x20000>;
@@ -5741,6 +5819,78 @@ tlmm: pinctrl@...0000 {
gpio-ranges = <&tlmm 0 0 239>;
wakeup-parent = <&pdc>;
+ cci0_default: cci0-default-state {
+ cci0_i2c0_default: cci0-i2c0-default-pins {
+ /* cci_i2c_sda0, cci_i2c_scl0 */
+ pins = "gpio101", "gpio102";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cci0_i2c1_default: cci0-i2c1-default-pins {
+ /* cci_i2c_sda1, cci_i2c_scl1 */
+ pins = "gpio103", "gpio104";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci0_sleep: cci0-sleep-state {
+ cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+ /* cci_i2c_sda0, cci_i2c_scl0 */
+ pins = "gpio101", "gpio102";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+ /* cci_i2c_sda1, cci_i2c_scl1 */
+ pins = "gpio103", "gpio104";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci1_default: cci1-default-state {
+ cci1_i2c0_default: cci1-i2c0-default-pins {
+ /* cci_i2c_sda2, cci_i2c_scl2 */
+ pins = "gpio105","gpio106";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cci1_i2c1_default: cci1-i2c1-default-pins {
+ /* aon_cci_i2c_sda3, aon_cci_i2c_scl3 */
+ pins = "gpio235","gpio236";
+ function = "aon_cci";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci1_sleep: cci1-sleep-state {
+ cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+ /* cci_i2c_sda2, cci_i2c_scl2 */
+ pins = "gpio105","gpio106";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+ /* aon_cci_i2c_sda3, aon_cci_i2c_scl3 */
+ pins = "gpio235","gpio236";
+ function = "aon_cci";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
qup_i2c0_data_clk: qup-i2c0-data-clk-state {
/* SDA, SCL */
pins = "gpio0", "gpio1";
--
2.48.1
Powered by blists - more mailing lists