linux-kernel - [PATCH v4 net-next PATCH 1/1] net: phy: air

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250317143111.28824-2-lucienX123@gmail.com>
Date: Mon, 17 Mar 2025 22:31:11 +0800
From: "Lucien.Jheng" <lucienx123@...il.com>
To: linux-clk@...r.kernel.org,
	andrew@...n.ch,
	hkallweit1@...il.com,
	linux@...linux.org.uk,
	kuba@...nel.org,
	davem@...emloft.net,
	edumazet@...gle.com,
	pabeni@...hat.com,
	daniel@...rotopia.org,
	ericwouds@...il.com
Cc: netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	joseph.lin@...oha.com,
	wenshin.chung@...oha.com,
	"Lucien.Jheng" <lucienX123@...il.com>
Subject: [PATCH v4 net-next PATCH 1/1] net: phy: air_en8811h: Add clk provider for CKO pin

EN8811H outputs 25MHz or 50MHz clocks on CKO, selected by GPIO3.
CKO clock activates on power-up and continues through md32 firmware loading.

Signed-off-by: Lucien.Jheng <lucienX123@...il.com>
---
 drivers/net/phy/air_en8811h.c | 95 +++++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/drivers/net/phy/air_en8811h.c b/drivers/net/phy/air_en8811h.c
index e9fd24cb7270..eb349b4ff327 100644
--- a/drivers/net/phy/air_en8811h.c
+++ b/drivers/net/phy/air_en8811h.c
@@ -16,6 +16,7 @@
 #include <linux/property.h>
 #include <linux/wordpart.h>
 #include <linux/unaligned.h>
+#include <linux/clk-provider.h>
 
 #define EN8811H_PHY_ID		0x03a2a411
 
@@ -112,6 +113,11 @@
 #define   EN8811H_POLARITY_TX_NORMAL		BIT(0)
 #define   EN8811H_POLARITY_RX_REVERSE		BIT(1)
 
+#define EN8811H_CLK_CGM     0xcf958
+#define EN8811H_CLK_CGM_CKO     BIT(26)
+#define EN8811H_HWTRAP1     0xcf914
+#define EN8811H_HWTRAP1_CKO     BIT(12)
+
 #define EN8811H_GPIO_OUTPUT		0xcf8b8
 #define   EN8811H_GPIO_OUTPUT_345		(BIT(3) | BIT(4) | BIT(5))
 
@@ -142,10 +148,15 @@ struct led {
 	unsigned long state;
 };
 
+#define clk_hw_to_en8811h_priv(_hw)			\
+	container_of(_hw, struct en8811h_priv, hw)
+
 struct en8811h_priv {
 	u32		firmware_version;
 	bool		mcu_needs_restart;
 	struct led	led[EN8811H_LED_COUNT];
+	struct clk_hw        hw;
+	struct phy_device *phydev;
 };
 
 enum {
@@ -806,6 +817,84 @@ static int en8811h_led_hw_is_supported(struct phy_device *phydev, u8 index,
 	return 0;
 };
 
+static unsigned long en8811h_recalc_rate(struct clk_hw *hw, unsigned long parent)
+{
+	struct en8811h_priv *priv = clk_hw_to_en8811h_priv(hw);
+	struct phy_device *phydev = priv->phydev;
+	u32 pbus_value;
+	int ret;
+
+	ret = air_buckpbus_reg_read(phydev, EN8811H_HWTRAP1, &pbus_value);
+	if (ret < 0)
+		return ret;
+
+	return (pbus_value & EN8811H_HWTRAP1_CKO) ? 50000000 : 25000000;
+}
+
+static int en8811h_enable(struct clk_hw *hw)
+{
+	struct en8811h_priv *priv = clk_hw_to_en8811h_priv(hw);
+	struct phy_device *phydev = priv->phydev;
+
+	return air_buckpbus_reg_modify(phydev, EN8811H_CLK_CGM,
+				EN8811H_CLK_CGM_CKO, EN8811H_CLK_CGM_CKO);
+}
+
+static void en8811h_disable(struct clk_hw *hw)
+{
+	struct en8811h_priv *priv = clk_hw_to_en8811h_priv(hw);
+	struct phy_device *phydev = priv->phydev;
+
+	air_buckpbus_reg_modify(phydev, EN8811H_CLK_CGM,
+				EN8811H_CLK_CGM_CKO, 0);
+}
+
+static int en8811h_is_enabled(struct clk_hw *hw)
+{
+	struct en8811h_priv *priv = clk_hw_to_en8811h_priv(hw);
+	struct phy_device *phydev = priv->phydev;
+	int ret = 0;
+	u32 pbus_value;
+
+	ret = air_buckpbus_reg_read(phydev, EN8811H_CLK_CGM, &pbus_value);
+	if (ret < 0)
+		return ret;
+
+	return (pbus_value & EN8811H_CLK_CGM_CKO);
+}
+
+static const struct clk_ops en8811h_clk_ops = {
+	.recalc_rate = en8811h_recalc_rate,
+	.enable = en8811h_enable,
+	.disable = en8811h_disable,
+	.is_enabled	= en8811h_is_enabled,
+};
+
+static int en8811h_clk_provider_setup(struct device *dev, struct clk_hw *hw)
+{
+	struct clk_init_data init;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_COMMON_CLK))
+		return 0;
+
+	init.name =  devm_kasprintf(dev, GFP_KERNEL, "%s-cko",
+				    fwnode_get_name(dev_fwnode(dev)));
+	if (!init.name)
+		return -ENOMEM;
+
+	init.ops = &en8811h_clk_ops;
+	init.flags = 0;
+	init.num_parents = 0;
+	hw->init = &init;
+
+	ret = devm_clk_hw_register(dev, hw);
+	if (ret)
+		return ret;
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, hw);
+}
+
 static int en8811h_probe(struct phy_device *phydev)
 {
 	struct en8811h_priv *priv;
@@ -838,6 +927,12 @@ static int en8811h_probe(struct phy_device *phydev)
 		return ret;
 	}
 
+	priv->phydev = phydev;
+	/* Co-Clock Output */
+	ret = en8811h_clk_provider_setup(&phydev->mdio.dev, &priv->hw);
+	if (ret)
+		return ret;
+
 	/* Configure led gpio pins as output */
 	ret = air_buckpbus_reg_modify(phydev, EN8811H_GPIO_OUTPUT,
 				      EN8811H_GPIO_OUTPUT_345,
-- 
2.34.1