| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250317-s6-s7-basic-v1-7-d653384e41f3@amlogic.com>
Date: Mon, 17 Mar 2025 15:16:58 +0800
From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@...nel.org>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Jerome Brunet <jbrunet@...libre.com>, Kevin Hilman <khilman@...libre.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, Xianwei Zhao <xianwei.zhao@...ogic.com>
Subject: [PATCH 7/7] arm64: dts: add support for S7D based Amlogic BM202
From: Xianwei Zhao <xianwei.zhao@...ogic.com>
Amlogic S7D is an advanced application processor designed for
hybrid OTT/IP Set Top Box and high-end media box applications.
Add basic support for the S7D based Amlogic BM202 board, Reusing
S7 basic components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.
Signed-off-by: Xianwei Zhao <xianwei.zhao@...ogic.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts | 41 +++++++++
arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi | 99 ++++++++++++++++++++++
3 files changed, 141 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 29e1c7b9ee31..8c16c22c7b8e 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-s7-s805x3-bp201.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7d-s905x5m-bm202.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
new file mode 100644
index 000000000000..2933fcdbc8ef
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7d.dtsi"
+/ {
+ model = "Amlogic S905X5M BM202 Development Board";
+ compatible = "amlogic,bm202", "amlogic,s7d";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_b;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 36 MiB reserved for ARM Trusted Firmware */
+ secmon_reserved: secmon@...0000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x05000000 0x0 0x2400000>;
+ no-map;
+ };
+ };
+};
+
+&uart_b {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
new file mode 100644
index 000000000000..e1099bc1535d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ };
+
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@...01000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xfff01000 0 0x1000>,
+ <0x0 0xfff02000 0 0x0100>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ apb: bus@...00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xfe000000 0x0 0x480000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+ uart_b: serial@...00 {
+ compatible = "amlogic,s7d-uart",
+ "amlogic,meson-s4-uart";
+ reg = <0x0 0x7a000 0x0 0x18>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+ };
+ };
+};
--
2.37.1
Powered by blists - more mailing lists