| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250317120622.1746415-4-b-padhi@ti.com>
Date: Mon, 17 Mar 2025 17:35:59 +0530
From: Beleswar Padhi <b-padhi@...com>
To: <andersson@...nel.org>, <mathieu.poirier@...aro.org>
CC: <afd@...com>, <hnagalla@...com>, <u-kumar1@...com>, <jm@...com>,
<jan.kiszka@...mens.com>, <christophe.jaillet@...adoo.fr>,
<jkangas@...hat.com>, <eballetbo@...hat.com>, <b-padhi@...com>,
<linux-remoteproc@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v9 03/26] remoteproc: k3-r5: Use k3_r5_rproc_mem_data structure for memory info
The ti_k3_r5_remoteproc.c driver previously hardcoded device memory
region addresses and names. Change this to use the k3_r5_rproc_mem_data
structure to store memory information. This aligns with K3 DSP and M4
drivers, and can be refactored out later.
Signed-off-by: Beleswar Padhi <b-padhi@...com>
---
drivers/remoteproc/ti_k3_r5_remoteproc.c | 65 ++++++++++++++++++++----
1 file changed, 56 insertions(+), 9 deletions(-)
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index 525f26996b56..29205d9e21af 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -84,18 +84,44 @@ enum cluster_mode {
CLUSTER_MODE_SINGLECORE
};
+/**
+ * struct k3_r5_mem_data - memory definitions for a R5
+ * @name: name for this memory entry
+ * @dev_addr: device address for the memory entry
+ */
+struct k3_r5_mem_data {
+ const char *name;
+ const u32 dev_addr;
+};
+
+/**
+ * struct k3_r5_dev_data - device data structure for a R5
+ * @mems: pointer to memory definitions for a R5
+ * @num_mems: number of memory regions in @mems
+ * @boot_align_addr: boot vector address alignment granularity
+ * @uses_lreset: flag to denote the need for local reset management
+ */
+struct k3_r5_dev_data {
+ const struct k3_r5_mem_data *mems;
+ u32 num_mems;
+ u32 boot_align_addr;
+ bool uses_lreset;
+};
+
/**
* struct k3_r5_soc_data - match data to handle SoC variations
* @tcm_is_double: flag to denote the larger unified TCMs in certain modes
* @tcm_ecc_autoinit: flag to denote the auto-initialization of TCMs for ECC
* @single_cpu_mode: flag to denote if SoC/IP supports Single-CPU mode
* @is_single_core: flag to denote if SoC/IP has only single core R5
+ * @core_data: pointer to R5-core-specific device data
*/
struct k3_r5_soc_data {
bool tcm_is_double;
bool tcm_ecc_autoinit;
bool single_cpu_mode;
bool is_single_core;
+ const struct k3_r5_dev_data *core_data;
};
/**
@@ -151,6 +177,7 @@ struct k3_r5_core {
* @rmem: reserved memory regions data
* @num_rmems: number of reserved memory regions
* @reset: reset control handle
+ * @data: pointer to R5-core-specific device data
* @tsp: TI-SCI processor control handle
* @ti_sci: TI-SCI handle
* @ti_sci_id: TI-SCI device identifier
@@ -166,6 +193,7 @@ struct k3_r5_rproc {
struct k3_r5_mem *rmem;
int num_rmems;
struct reset_control *reset;
+ const struct k3_r5_dev_data *data;
struct ti_sci_proc *tsp;
const struct ti_sci_handle *ti_sci;
u32 ti_sci_id;
@@ -1207,31 +1235,32 @@ static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc)
static int k3_r5_core_of_get_internal_memories(struct platform_device *pdev,
struct k3_r5_rproc *kproc)
{
- static const char * const mem_names[] = {"atcm", "btcm"};
+ const struct k3_r5_dev_data *data = kproc->data;
struct device *dev = &pdev->dev;
struct k3_r5_core *core = kproc->priv;
struct resource *res;
int num_mems;
int i;
- num_mems = ARRAY_SIZE(mem_names);
- kproc->mem = devm_kcalloc(dev, num_mems, sizeof(*kproc->mem), GFP_KERNEL);
+ num_mems = kproc->data->num_mems;
+ kproc->mem = devm_kcalloc(kproc->dev, num_mems, sizeof(*kproc->mem),
+ GFP_KERNEL);
if (!kproc->mem)
return -ENOMEM;
for (i = 0; i < num_mems; i++) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- mem_names[i]);
+ data->mems[i].name);
if (!res) {
dev_err(dev, "found no memory resource for %s\n",
- mem_names[i]);
+ data->mems[i].name);
return -EINVAL;
}
if (!devm_request_mem_region(dev, res->start,
resource_size(res),
dev_name(dev))) {
dev_err(dev, "could not request %s region for resource\n",
- mem_names[i]);
+ data->mems[i].name);
return -EBUSY;
}
@@ -1245,7 +1274,8 @@ static int k3_r5_core_of_get_internal_memories(struct platform_device *pdev,
kproc->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start,
resource_size(res));
if (!kproc->mem[i].cpu_addr) {
- dev_err(dev, "failed to map %s memory\n", mem_names[i]);
+ dev_err(dev, "failed to map %s memory\n",
+ data->mems[i].name);
return -ENOMEM;
}
kproc->mem[i].bus_addr = res->start;
@@ -1258,7 +1288,7 @@ static int k3_r5_core_of_get_internal_memories(struct platform_device *pdev,
* addresses 0 and 0x41010000 (same as the bus address on AM65x
* SoCs) based on loczrama setting
*/
- if (!strcmp(mem_names[i], "atcm")) {
+ if (!strcmp(data->mems[i].name, "atcm")) {
kproc->mem[i].dev_addr = core->loczrama ?
0 : K3_R5_TCM_DEV_ADDR;
} else {
@@ -1268,7 +1298,7 @@ static int k3_r5_core_of_get_internal_memories(struct platform_device *pdev,
kproc->mem[i].size = resource_size(res);
dev_dbg(dev, "memory %5s: bus addr %pa size 0x%zx va %pK da 0x%x\n",
- mem_names[i], &kproc->mem[i].bus_addr,
+ data->mems[i].name, &kproc->mem[i].bus_addr,
kproc->mem[i].size, kproc->mem[i].cpu_addr,
kproc->mem[i].dev_addr);
}
@@ -1323,6 +1353,7 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev)
kproc->priv = core;
kproc->dev = cdev;
kproc->rproc = rproc;
+ kproc->data = cluster->soc_data->core_data;
core->kproc = kproc;
kproc->ti_sci = devm_ti_sci_get_by_phandle(cdev, "ti,sci");
@@ -1764,11 +1795,24 @@ static int k3_r5_probe(struct platform_device *pdev)
return 0;
}
+static const struct k3_r5_mem_data r5_mems[] = {
+ { .name = "atcm", .dev_addr = 0x0 },
+ { .name = "btcm", .dev_addr = K3_R5_TCM_DEV_ADDR },
+};
+
+static const struct k3_r5_dev_data r5_data = {
+ .mems = r5_mems,
+ .num_mems = ARRAY_SIZE(r5_mems),
+ .boot_align_addr = 0,
+ .uses_lreset = true,
+};
+
static const struct k3_r5_soc_data am65_j721e_soc_data = {
.tcm_is_double = false,
.tcm_ecc_autoinit = false,
.single_cpu_mode = false,
.is_single_core = false,
+ .core_data = &r5_data,
};
static const struct k3_r5_soc_data j7200_j721s2_soc_data = {
@@ -1776,6 +1820,7 @@ static const struct k3_r5_soc_data j7200_j721s2_soc_data = {
.tcm_ecc_autoinit = true,
.single_cpu_mode = false,
.is_single_core = false,
+ .core_data = &r5_data,
};
static const struct k3_r5_soc_data am64_soc_data = {
@@ -1783,6 +1828,7 @@ static const struct k3_r5_soc_data am64_soc_data = {
.tcm_ecc_autoinit = true,
.single_cpu_mode = true,
.is_single_core = false,
+ .core_data = &r5_data,
};
static const struct k3_r5_soc_data am62_soc_data = {
@@ -1790,6 +1836,7 @@ static const struct k3_r5_soc_data am62_soc_data = {
.tcm_ecc_autoinit = true,
.single_cpu_mode = false,
.is_single_core = true,
+ .core_data = &r5_data,
};
static const struct of_device_id k3_r5_of_match[] = {
--
2.34.1
Powered by blists - more mailing lists