[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9852e5a8-843d-48ae-90d0-7991628e93b3@google.com>
Date: Thu, 20 Mar 2025 14:11:33 -0700
From: Amit Sunil Dhamne <amitsd@...gle.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Badhri Jagan Sridharan <badhri@...gle.com>,
Sebastian Reichel <sre@...nel.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
"Rafael J. Wysocki" <rafael@...nel.org>, Len Brown <len.brown@...el.com>,
Pavel Machek <pavel@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
linux-pm@...r.kernel.org, RD Babiera <rdbabiera@...gle.com>,
Kyle Tso <kyletso@...gle.com>
Subject: Re: [PATCH 0/5] Add support for Battery Status & Battery Caps AMS in
TCPM
On 3/16/25 9:52 AM, Krzysztof Kozlowski wrote:
> On 15/03/2025 01:49, Amit Sunil Dhamne wrote:
>> Hi Krzysztof,
>>
>> Thanks for the review!
>>
>> On 3/13/25 1:50 AM, Krzysztof Kozlowski wrote:
>>> On Wed, Mar 12, 2025 at 04:42:00PM -0700, Amit Sunil Dhamne wrote:
>>>> Support for Battery Status & Battery Caps messages in response to
>>>> Get_Battery_Status & Get_Battery_Cap request is required by USB PD devices
>>>> powered by battery, as per "USB PD R3.1 V1.8 Spec", "6.13 Message
>>>> Applicability" section. This patchset adds support for these AMSes
>>>> to achieve greater compliance with the spec.
>>> Which board uses it? I would be happy to see that connection between
>>> batteries and USB connector on the schematics of some real device. How
>>> does it look like?
>> Any board that uses a USB Type-C connector that supplies power into or
> If you keep responding like this, you will got nowhere, so let me
> re-iterate:
>
> Which upstream DTS (or upstream supported hardware) is going to use this
> binding, so I can see how you are going to implement it there in the
> entire system?
This is for maxim,max33359 Type-C controller.
This would property would have been present for the connector present in
the typec device for gs101-oriole board (that uses the max33359
controller).
However, I will be exploring existing bindings to describe the
relationship for now.
>> out of a battery while operating in sink or source mode respectively.
>> The VBUS is connected to the (battery + buck boost IC's CHGin/Vin) or a
>> companion IFPMIC connected to a battery. In our board we have USB
>> Connector <-> IFPMIC <-> Battery.
> Which board is that?
gs101-oriole board.
Thanks,
Amit
>
> Best regards,
> Krzysztof
Powered by blists - more mailing lists