| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250320-upstream-adp5055-v2-1-aac2d3705802@analog.com>
Date: Thu, 20 Mar 2025 14:53:54 +0800
From: Alexis Czezar Torreno <alexisczezar.torreno@...log.com>
To: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Rob
Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor
Dooley <conor+dt@...nel.org>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Alexis
Czezar Torreno <alexisczezar.torreno@...log.com>
Subject: [PATCH v2 1/2] dt-bindings: regulator: add adi,adp5055-regulator
Add documentation for devicetree bindings for ADP5055. The device consists
of 3 buck regulators able to connect to high input voltages of up to 18V
with no preregulators.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@...log.com>
---
.../bindings/regulator/adi,adp5055-regulator.yaml | 161 +++++++++++++++++++++
MAINTAINERS | 6 +
2 files changed, 167 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/adi,adp5055-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,adp5055-regulator.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..fc8f1e61ba321f8b4c6f8c1e3d0e91d570fb4953
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/adi,adp5055-regulator.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,adp5055-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5055 Triple Buck Regulator
+
+maintainers:
+ - Alexis Czezar Torreno <alexisczezar.torreno@...log.com>
+
+description: |
+ The ADP5055 combines three high performance buck regulators.
+ The device enables direct connection to high input voltages
+ up to 18 V with no preregulators.
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adp5055.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,adp5055
+
+ reg:
+ enum:
+ - 0x70
+ - 0x71
+
+ adi,tset-us:
+ description:
+ Setting time used by the device. This is changed via soldering
+ specific resistor values on the CFG2 pin.
+ enum: [2600, 20800]
+ default: 2600
+
+ adi,hw-en-array-gpios:
+ description:
+ Asserted during driver probe. Each array entry acts as the
+ hardware enable for channels 0-2. Should be marked 0 for active
+ low. Requires all three channels to be initialized. Not adding
+ the property turns the system to a software only enable mode.
+ minItems: 3
+ maxItems: 3
+
+ adi,ocp-blanking:
+ description:
+ If present, the over current protection
+ blanking (OCP) for all channels is on.
+ type: boolean
+
+ adi,delay-power-good:
+ description:
+ Configures delay timer of the power good (PWRGD) pin.
+ Delay is based on Tset which can be 2.6 ms or 20.8 ms.
+ type: boolean
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^channel@([0-2])$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ description: The channel number representing each buck converter.
+ maximum: 2
+
+ adi,dvs-limit-upper-microvolt:
+ description:
+ Configure the allowable upper side limit of the
+ voltage output of each channel in microvolt.
+ Voltages are in 12mV steps, value is autoadjusted.
+ Vout_high = Vout + DVS_upper_limit.
+ minimum: 12000
+ maximum: 192000
+ default: 192000
+
+ adi,dvs-limit-lower-microvolt:
+ description:
+ Configure the allowable lower side limit of the
+ voltage output of each channel in microvolt.
+ Voltages are in 12mV steps, value is autoadjusted.
+ Vout_low = Vout + DVS_lower_limit.
+ minimum: -190500
+ maximum: -10500
+ default: -190500
+
+ adi,fast-transient:
+ description:
+ Configures the fast transient sensitivity for each channel.
+ "none" - No fast transient.
+ "3G_1.5%" - 1.5% window with 3*350uA/V
+ "5G_1.5%" - 1.5% window with 5*350uA/V
+ "5G_2.5%" - 2.5% window with 5*350uA/V
+ enum: [none, 3G_1.5%, 5G_1.5%, 5G_2.5%]
+ default: 5G_2.5%
+
+ adi,mask-power-good:
+ description:
+ If present, masks individual channels to the external
+ PWRGD hardware pin.
+ type: boolean
+
+ required:
+ - regulator-name
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@70 {
+ compatible = "adi,adp5055";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adi,tset-us = <2600>;
+ adi,hw-en-array-gpios = <&gpio 17 0>,
+ <&gpio 18 0>,
+ <&gpio 19 0>;
+
+ adi,ocp-blanking;
+ adi,delay-power-good;
+
+ DCDC0 {
+ regulator-name = "DCDC0";
+ adi,dvs-limit-upper-microvolt = <192000>;
+ adi,dvs-limit-lower-microvolt = <(-190500)>;
+ adi,fast-transient = "5G_2.5%";
+ adi,mask-power-good;
+ };
+
+ DCDC1 {
+ regulator-name = "DCDC1";
+ adi,dvs-limit-upper-microvolt = <192000>;
+ adi,dvs-limit-lower-microvolt = <(-190500)>;
+ adi,fast-transient = "5G_2.5%";
+ adi,mask-power-good;
+ };
+
+ DCDC2 {
+ regulator-name = "DCDC2";
+ adi,dvs-limit-upper-microvolt = <192000>;
+ adi,dvs-limit-lower-microvolt = <(-190500)>;
+ adi,fast-transient = "5G_2.5%";
+ adi,mask-power-good;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 896a307fa06545e2861abe46ea7029f9b4d3628e..b2ec43f84d84765c319d8403fb5650afa273db83 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1525,6 +1525,12 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
F: drivers/iio/filter/admv8818.c
+ANALOG DEVICES INC ADP5055 DRIVER
+M: Alexis Czezar Torreno <alexisczezar.torreno@...log.com>
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/regulator/adi,adp5055-regulator.yaml
+
ANALOG DEVICES INC ADP5061 DRIVER
M: Michael Hennerich <Michael.Hennerich@...log.com>
L: linux-pm@...r.kernel.org
--
2.34.1
Powered by blists - more mailing lists