[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <rdvsnxuc6by6sci56sh7thzpxo5cqi7q24fnmc7hi5yrfszwrg@kqjpiilko3xo>
Date: Thu, 20 Mar 2025 16:03:57 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: srinivas.kandagatla@...aro.org
Cc: peda@...ntia.se, broonie@...nel.org, andersson@...nel.org,
krzk+dt@...nel.org, ivprusov@...utedevices.com,
luca.ceresoli@...tlin.com, zhoubinbin@...ngson.cn,
paulha@...nsource.cirrus.com, lgirdwood@...il.com, robh@...nel.org,
conor+dt@...nel.org, konradybcio@...nel.org, perex@...ex.cz,
tiwai@...e.com, linux-sound@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, johan+linaro@...nel.org
Subject: Re: [PATCH v2 4/5] ASoC: codecs: wcd938x: add mux control support
for hp audio mux
On Thu, Mar 20, 2025 at 11:56:32AM +0000, srinivas.kandagatla@...aro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>
> On some platforms to minimise pop and click during switching between
> CTIA and OMTP headset an additional HiFi mux is used. Most common
> case is that this switch is switched on by default, but on some
> platforms this needs a regulator enable.
>
> move to using mux control to enable both regulator and handle gpios,
> deprecate the usage of gpio.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> ---
> sound/soc/codecs/Kconfig | 2 ++
> sound/soc/codecs/wcd938x.c | 38 ++++++++++++++++++++++++++++++--------
> 2 files changed, 32 insertions(+), 8 deletions(-)
>
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index ee35f3aa5521..b04076282c8b 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -2226,6 +2226,8 @@ config SND_SOC_WCD938X
> tristate
> depends on SOUNDWIRE || !SOUNDWIRE
> select SND_SOC_WCD_CLASSH
> + select MULTIPLEXER
> + imply MUX_GPIO
Why? This is true for a particular platform, isn't it?
>
> config SND_SOC_WCD938X_SDW
> tristate "WCD9380/WCD9385 Codec - SDW"
> diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
> index f2a4f3262bdb..b7a235eef6ba 100644
> --- a/sound/soc/codecs/wcd938x.c
> +++ b/sound/soc/codecs/wcd938x.c
> @@ -19,6 +19,7 @@
> #include <linux/regmap.h>
> #include <sound/soc.h>
> #include <sound/soc-dapm.h>
> +#include <linux/mux/consumer.h>
> #include <linux/regulator/consumer.h>
>
> #include "wcd-clsh-v2.h"
> @@ -178,6 +179,8 @@ struct wcd938x_priv {
> int variant;
> int reset_gpio;
> struct gpio_desc *us_euro_gpio;
> + struct mux_control *us_euro_mux;
> + u32 mux_state;
> u32 micb1_mv;
> u32 micb2_mv;
> u32 micb3_mv;
> @@ -3243,9 +3246,16 @@ static bool wcd938x_swap_gnd_mic(struct snd_soc_component *component, bool activ
>
> wcd938x = snd_soc_component_get_drvdata(component);
>
> - value = gpiod_get_value(wcd938x->us_euro_gpio);
> + if (!wcd938x->us_euro_mux) {
> + value = gpiod_get_value(wcd938x->us_euro_gpio);
>
> - gpiod_set_value(wcd938x->us_euro_gpio, !value);
> + gpiod_set_value(wcd938x->us_euro_gpio, !value);
This looks like a separate topic, but why is 'active' being ignored?
> + } else {
> + mux_control_deselect(wcd938x->us_euro_mux);
> + wcd938x->mux_state = !wcd938x->mux_state;
> + if (mux_control_select(wcd938x->us_euro_mux, wcd938x->mux_state))
Can't it just be 'mux_control_select(wcd938x->us_euro_mux, active)' ?
> + dev_err(component->dev, "Unable to select us/euro mux state\n");
> + }
>
> return true;
> }
--
With best wishes
Dmitry
Powered by blists - more mailing lists