linux-kernel - [PATCH v6 04/10] ARM: dts: aspeed: catalina: Add fan controller support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250321-potin-catalina-dts-update-20250102-v6-4-4bd85efeb9b4@gmail.com>
Date: Fri, 21 Mar 2025 15:26:05 +0800
From: Potin Lai <potin.lai.pt@...il.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Joel Stanley <joel@....id.au>, 
 Andrew Jeffery <andrew@...econstruct.com.au>, 
 Patrick Williams <patrick@...cx.xyz>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, 
 linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org, 
 Cosmo Chou <cosmo.chou@...ntatw.com>, Potin Lai <potin.lai@...ntatw.com>, 
 Potin Lai <potin.lai.pt@...il.com>
Subject: [PATCH v6 04/10] ARM: dts: aspeed: catalina: Add fan controller
 support

Add device tree nodes for the MAX31790 fan controllers on the Power
Distribution Board (PDB). These nodes enable fan speed control and
monitoring, improving thermal management and system reliability.

Signed-off-by: Potin Lai <potin.lai.pt@...il.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index f5f47245796a..792b739b1103 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -466,6 +466,15 @@ i2c1mux0ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x2>;
+
+			fanctl0: fan-controller@21{
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			fanctl1: fan-controller@27{
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
 		};
 		i2c1mux0ch3: i2c@3 {
 			#address-cells = <1>;

-- 
2.31.1