[ 0.000000] Linux version 6.14.0-rc7-00074-ga7f2e10ecd8f (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #110 SMP PREEMPT_DYNAMIC Thu Mar 20 00:43:24 CET 2025 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.14.0-rc7-00074-ga7f2e10ecd8f root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=16M cryptomgr.notests [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0x515a4018-0x515b4057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000515a4017] usable [ 0.000000] reserve setup_data: [mem 0x00000000515a4018-0x00000000515b4057] usable [ 0.000000] reserve setup_data: [mem 0x00000000515b4058-0x00000000556aafff] usable [ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable [ 0.000000] efi: EFI v2.4 by American Megatrends [ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62675018 INITRD=0x5577da98 TPMEventLog=0x65188018 [ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved [ 0.000000] efi: Not removing mem37: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem38: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem40: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022 [ 0.000000] DMI: Memory slots populated: 2/2 [ 0.000000] tsc: Detected 2900.000 MHz processor [ 0.000000] tsc: Detected 2899.886 MHz TSC [ 0.000650] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000652] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000658] last_pfn = 0x481800 max_arch_pfn = 0x400000000 [ 0.000661] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs [ 0.000663] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000952] last_pfn = 0x78600 max_arch_pfn = 0x400000000 [ 0.006904] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0. [ 0.006909] Using GB pages for direct mapping [ 0.019507] printk: log buffer data + meta data: 16777216 + 58720256 = 75497472 bytes [ 0.019508] printk: early log buf free: 125336(95%) [ 0.019509] Secure boot disabled [ 0.019511] RAMDISK: [mem 0x515b5000-0x52587fff] [ 0.019521] ACPI: Early table checksum verification disabled [ 0.019524] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL ) [ 0.019527] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.019532] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.019536] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL CBX3 01072009 INTL 20160422) [ 0.019538] ACPI: FACS 0x000000006F86F180 000040 [ 0.019540] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.019541] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.019543] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.019545] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.019547] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.019549] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.019551] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.019553] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.019555] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.019557] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422) [ 0.019559] ACPI: UEFI 0x00000000651B5168 000042 (v01 00000000 00000000) [ 0.019561] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.019563] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.019564] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL CBX3 00000000 MSFT 0000005F) [ 0.019566] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.019568] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.019570] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.019572] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.019574] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.019576] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.019578] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422) [ 0.019580] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.019582] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.019583] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.019585] ACPI: BGRT 0x00000000651C2550 000038 (v00 01072009 AMI 00010013) [ 0.019587] ACPI: TPM2 0x00000000651C2588 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.019589] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.019591] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.019593] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53] [ 0.019594] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46] [ 0.019594] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf] [ 0.019595] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb] [ 0.019596] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23] [ 0.019596] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3] [ 0.019597] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13] [ 0.019597] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f] [ 0.019598] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8] [ 0.019598] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7] [ 0.019599] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6] [ 0.019599] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df] [ 0.019600] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163] [ 0.019601] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9] [ 0.019601] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d] [ 0.019602] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123] [ 0.019602] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f] [ 0.019603] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0] [ 0.019603] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556] [ 0.019604] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559] [ 0.019604] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a] [ 0.019605] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673] [ 0.019606] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb] [ 0.019606] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac] [ 0.019607] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0] [ 0.019607] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d] [ 0.019608] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c] [ 0.019608] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587] [ 0.019609] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb] [ 0.019610] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f] [ 0.019610] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f] [ 0.019727] No NUMA configuration found [ 0.019727] Faking a node at [mem 0x0000000000000000-0x00000004817fffff] [ 0.019737] NODE_DATA(0) allocated [mem 0x47cfd3680-0x47cffdfff] [ 0.019900] Zone ranges: [ 0.019901] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019902] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019903] Normal [mem 0x0000000100000000-0x00000004817fffff] [ 0.019904] Device empty [ 0.019905] Movable zone start for each node [ 0.019907] Early memory node ranges [ 0.019907] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.019909] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.019909] node 0: [mem 0x0000000000100000-0x00000000556aafff] [ 0.019910] node 0: [mem 0x00000000556ad000-0x0000000064df3fff] [ 0.019911] node 0: [mem 0x000000006ffff000-0x000000006fffffff] [ 0.019911] node 0: [mem 0x0000000078000000-0x00000000785fffff] [ 0.019912] node 0: [mem 0x0000000100000000-0x00000004817fffff] [ 0.019914] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff] [ 0.019918] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019919] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019940] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.022434] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.022848] On node 0, zone DMA32: 45579 pages in unavailable ranges [ 0.023355] On node 0, zone Normal: 31232 pages in unavailable ranges [ 0.023602] On node 0, zone Normal: 26624 pages in unavailable ranges [ 0.023610] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff] [ 0.023797] ACPI: PM-Timer IO Port: 0x1808 [ 0.023802] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.023803] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.023804] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.023804] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.023831] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.023833] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.023834] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.023837] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.023838] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.023845] e820: update [mem 0x6225f000-0x623ebfff] usable ==> reserved [ 0.023852] TSC deadline timer available [ 0.023856] CPU topo: Max. logical packages: 1 [ 0.023856] CPU topo: Max. logical dies: 1 [ 0.023857] CPU topo: Max. dies per package: 1 [ 0.023860] CPU topo: Max. threads per core: 2 [ 0.023861] CPU topo: Num. cores per package: 2 [ 0.023861] CPU topo: Num. threads per package: 4 [ 0.023861] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.023879] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.023881] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.023883] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.023884] PM: hibernation: Registered nosave memory: [mem 0x515a4000-0x515a4fff] [ 0.023885] PM: hibernation: Registered nosave memory: [mem 0x515b4000-0x515b4fff] [ 0.023887] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff] [ 0.023887] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff] [ 0.023889] PM: hibernation: Registered nosave memory: [mem 0x6225f000-0x623ebfff] [ 0.023890] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff] [ 0.023891] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff] [ 0.023891] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff] [ 0.023892] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff] [ 0.023894] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff] [ 0.023895] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff] [ 0.023895] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff] [ 0.023896] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.023896] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.023897] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.023897] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.023898] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.023898] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.023899] [mem 0x7c800000-0xfdffffff] available for PCI devices [ 0.023900] Booting paravirtualized kernel on bare hardware [ 0.023902] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.028056] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.028338] percpu: Embedded 94 pages/cpu s290816 r65536 d28672 u524288 [ 0.028344] pcpu-alloc: s290816 r65536 d28672 u524288 alloc=1*2097152 [ 0.028346] pcpu-alloc: [0] 0 1 2 3 [ 0.028364] Kernel command line: BOOT_IMAGE=/vmlinuz-6.14.0-rc7-00074-ga7f2e10ecd8f root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=16M cryptomgr.notests [ 0.028425] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.14.0-rc7-00074-ga7f2e10ecd8f", will be passed to user space. [ 0.028452] random: crng init done [ 0.029931] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.030691] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.030737] Fallback order for Node 0: 0 [ 0.030739] Built 1 zonelists, mobility grouping on. Total pages: 4090767 [ 0.030740] Policy zone: Normal [ 0.030746] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.030753] software IO TLB: area num 4. [ 0.049360] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.049365] kmemleak: Kernel memory leak detector disabled [ 0.049392] ftrace: allocating 43272 entries in 170 pages [ 0.063405] ftrace: allocated 170 pages with 4 groups [ 0.064078] Dynamic Preempt: voluntary [ 0.064108] rcu: Preemptible hierarchical RCU implementation. [ 0.064109] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.064110] Trampoline variant of Tasks RCU enabled. [ 0.064110] Rude variant of Tasks RCU enabled. [ 0.064111] Tracing variant of Tasks RCU enabled. [ 0.064111] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.064112] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.064116] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.064118] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.064119] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.068133] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.068346] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.068525] Console: colour dummy device 80x25 [ 0.068528] printk: legacy console [tty0] enabled [ 0.068565] ACPI: Core revision 20240827 [ 0.068708] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.068760] APIC: Switch to symmetric I/O mode setup [ 0.068762] DMAR: Host address width 39 [ 0.068763] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.068770] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.068772] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.068775] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.068777] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff [ 0.068778] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff [ 0.068780] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.068780] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.068782] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.068783] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.068784] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.070396] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.070398] x2apic enabled [ 0.070451] APIC: Switched APIC routing to: cluster x2apic [ 0.074488] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns [ 0.074494] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544) [ 0.074524] CPU0: Thermal monitoring enabled (TM1) [ 0.074560] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.074561] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4 [ 0.074565] process: using mwait in idle threads [ 0.074568] Spectre V2 : User space: Vulnerable [ 0.074569] Speculative Store Bypass: Vulnerable [ 0.074572] SRBDS: Vulnerable [ 0.074577] GDS: Vulnerable [ 0.074581] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.074582] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.074583] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.074584] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.074585] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.074586] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.074587] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.074588] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.074589] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.078492] Freeing SMP alternatives memory: 36K [ 0.078492] pid_max: default: 32768 minimum: 301 [ 0.078492] LSM: initializing lsm=capability,landlock,apparmor,bpf [ 0.078492] landlock: Up and running. [ 0.078492] AppArmor: AppArmor initialized [ 0.078492] LSM support for eBPF active [ 0.078492] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.078492] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.078492] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9) [ 0.078492] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.078492] ... version: 4 [ 0.078492] ... bit width: 48 [ 0.078492] ... generic registers: 4 [ 0.078492] ... value mask: 0000ffffffffffff [ 0.078492] ... max period: 00007fffffffffff [ 0.078492] ... fixed-purpose events: 3 [ 0.078492] ... event mask: 000000070000000f [ 0.078492] signal: max sigframe size: 1616 [ 0.078492] Estimated ratio of average max frequency by base frequency (times 1024): 1235 [ 0.078492] rcu: Hierarchical SRCU implementation. [ 0.078492] rcu: Max phase no-delay instances is 1000. [ 0.078492] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.078492] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.078492] smp: Bringing up secondary CPUs ... [ 0.078492] smpboot: x86: Booting SMP configuration: [ 0.078492] .... node #0, CPUs: #1 #2 #3 [ 0.078492] smp: Brought up 1 node, 4 CPUs [ 0.078492] smpboot: Total of 4 processors activated (23199.08 BogoMIPS) [ 0.098520] node 0 deferred pages initialised in 24ms [ 0.099169] Memory: 15864396K/16363068K available (14148K kernel code, 2558K rwdata, 10228K rodata, 2924K init, 6288K bss, 488028K reserved, 0K cma-reserved) [ 0.099169] devtmpfs: initialized [ 0.099169] x86/mm: Memory block size: 128MB [ 0.099652] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes) [ 0.099652] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes) [ 0.103101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.103109] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.103163] pinctrl core: initialized pinctrl subsystem [ 0.103580] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.103779] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.103895] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.104020] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.104036] audit: initializing netlink subsys (disabled) [ 0.104055] audit: type=2000 audit(1742453510.000:1): state=initialized audit_enabled=0 res=1 [ 0.104055] thermal_sys: Registered thermal governor 'fair_share' [ 0.104055] thermal_sys: Registered thermal governor 'bang_bang' [ 0.104055] thermal_sys: Registered thermal governor 'step_wise' [ 0.104055] thermal_sys: Registered thermal governor 'user_space' [ 0.104055] thermal_sys: Registered thermal governor 'power_allocator' [ 0.104055] cpuidle: using governor ladder [ 0.104055] cpuidle: using governor menu [ 0.104055] Simple Boot Flag at 0x47 set to 0x80 [ 0.104055] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.104055] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.104055] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.104055] PCI: Using configuration type 1 for base access [ 0.104055] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.104055] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.104055] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.104055] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.104055] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.104055] ACPI: Added _OSI(Module Device) [ 0.104055] ACPI: Added _OSI(Processor Device) [ 0.104055] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.104055] ACPI: Added _OSI(Processor Aggregator Device) [ 0.140612] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.146758] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.151277] ACPI: Dynamic OEM Table Load: [ 0.151277] ACPI: SSDT 0xFFFF968D813CB800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.152029] ACPI: Dynamic OEM Table Load: [ 0.152034] ACPI: SSDT 0xFFFF968D80D7F800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.153448] ACPI: Dynamic OEM Table Load: [ 0.153453] ACPI: SSDT 0xFFFF968D80D7D800 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.155280] ACPI: Dynamic OEM Table Load: [ 0.155284] ACPI: SSDT 0xFFFF968D813D1000 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.157686] ACPI: EC: EC started [ 0.157687] ACPI: EC: interrupt blocked [ 0.162551] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.162553] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.162555] ACPI: Interpreter enabled [ 0.162590] ACPI: PM: (supports S0 S3 S4 S5) [ 0.162591] ACPI: Using IOAPIC for interrupt routing [ 0.162622] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.162624] PCI: Using E820 reservations for host bridge windows [ 0.163127] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.166187] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource [ 0.166440] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource [ 0.166702] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource [ 0.166955] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource [ 0.167207] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource [ 0.167458] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource [ 0.168060] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource [ 0.168314] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource [ 0.168566] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource [ 0.168817] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource [ 0.169068] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource [ 0.169321] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource [ 0.169575] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource [ 0.169833] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource [ 0.170084] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource [ 0.170335] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource [ 0.170600] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource [ 0.171643] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource [ 0.171893] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource [ 0.172148] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource [ 0.190677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.190684] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.190840] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.191123] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR] [ 0.191125] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.191829] PCI host bridge to bus 0000:00 [ 0.191832] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.191834] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.191836] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.191837] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window] [ 0.191838] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.191840] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.191854] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint [ 0.191923] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.191936] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit] [ 0.191942] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref] [ 0.191944] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.191954] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.192080] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint [ 0.192095] pci 0000:00:04.0: BAR 0 [mem 0xdc420000-0xdc427fff 64bit] [ 0.192327] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint [ 0.192359] pci 0000:00:14.0: BAR 0 [mem 0xdc410000-0xdc41ffff 64bit] [ 0.192390] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.192835] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint [ 0.192864] pci 0000:00:14.2: BAR 0 [mem 0xdc434000-0xdc434fff 64bit] [ 0.192978] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint [ 0.193029] pci 0000:00:15.0: BAR 0 [mem 0xdc433000-0xdc433fff 64bit] [ 0.193313] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint [ 0.193364] pci 0000:00:15.1: BAR 0 [mem 0xdc432000-0xdc432fff 64bit] [ 0.193640] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint [ 0.193668] pci 0000:00:16.0: BAR 0 [mem 0xdc431000-0xdc431fff 64bit] [ 0.193696] pci 0000:00:16.0: PME# supported from D3hot [ 0.193987] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port [ 0.194006] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.194010] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.194017] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.194063] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.194448] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port [ 0.194464] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.194468] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.194517] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.194887] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 PCIe Root Port [ 0.194903] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.194907] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.194954] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.195332] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port [ 0.195347] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.195351] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.195397] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.195794] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint [ 0.196051] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint [ 0.196085] pci 0000:00:1f.2: BAR 0 [mem 0xdc42c000-0xdc42ffff] [ 0.196260] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint [ 0.196304] pci 0000:00:1f.3: BAR 0 [mem 0xdc428000-0xdc42bfff 64bit] [ 0.196310] pci 0000:00:1f.3: BAR 4 [mem 0xdc400000-0xdc40ffff 64bit] [ 0.196346] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.196875] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint [ 0.197008] pci 0000:00:1f.4: BAR 0 [mem 0xdc430000-0xdc4300ff 64bit] [ 0.197018] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f] [ 0.197281] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.197716] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint [ 0.198157] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit] [ 0.199036] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold [ 0.200647] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.200743] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint [ 0.200787] pci 0000:3b:00.0: BAR 1 [mem 0xdc300000-0xdc300fff] [ 0.200866] pci 0000:3b:00.0: supports D1 D2 [ 0.200867] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.201184] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.201276] pci 0000:3c:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint [ 0.201314] pci 0000:3c:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit] [ 0.201392] pci 0000:3c:00.0: PME# supported from D0 D1 D3hot [ 0.201715] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.204580] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.204580] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.204580] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.204580] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.204580] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.204580] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.204580] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.204580] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.213935] ACPI: EC: interrupt unblocked [ 0.213936] ACPI: EC: event unblocked [ 0.213942] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.213943] ACPI: EC: GPE=0x14 [ 0.213944] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 0.213946] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 0.214176] iommu: Default domain type: Translated [ 0.214176] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.214176] pps_core: LinuxPPS API ver. 1 registered [ 0.214176] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.214176] PTP clock support registered [ 0.214176] EDAC MC: Ver: 3.0.0 [ 0.214670] efivars: Registered efivars operations [ 0.214682] NetLabel: Initializing [ 0.214684] NetLabel: domain hash size = 128 [ 0.214685] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.214705] NetLabel: unlabeled traffic allowed by default [ 0.214707] PCI: Using ACPI for IRQ routing [ 0.239529] PCI: pci_cache_line_size set to 64 bytes [ 0.239910] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.239911] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.239912] e820: reserve RAM buffer [mem 0x515a4018-0x53ffffff] [ 0.239913] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff] [ 0.239914] e820: reserve RAM buffer [mem 0x6225f000-0x63ffffff] [ 0.239915] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff] [ 0.239916] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff] [ 0.239917] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff] [ 0.239948] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.239948] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.239948] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.239948] vgaarb: loaded [ 0.239948] clocksource: Switched to clocksource tsc-early [ 0.239948] VFS: Disk quotas dquot_6.6.0 [ 0.239948] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.239948] AppArmor: AppArmor Filesystem Enabled [ 0.239948] pnp: PnP ACPI init [ 0.239948] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.239948] system 00:00: [io 0xffff] has been reserved [ 0.239948] system 00:00: [io 0xffff] has been reserved [ 0.239948] system 00:00: [io 0xffff] has been reserved [ 0.239948] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.239948] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.239948] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.239948] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.239948] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.239948] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.239948] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.239948] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.239948] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.239948] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.239948] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.239948] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.239948] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.239948] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.239948] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.239948] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.239948] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.239948] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.239948] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.239948] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.239948] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.240776] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.240778] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.245316] pnp: PnP ACPI: found 9 devices [ 0.250702] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.250748] NET: Registered PF_INET protocol family [ 0.250857] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.261540] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.261560] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.261619] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.261809] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.262003] TCP: Hash tables configured (established 131072 bind 65536) [ 0.262091] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.262149] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.262216] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.262291] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.262297] NET: Registered PF_XDP protocol family [ 0.262305] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000 [ 0.262315] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned [ 0.262318] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.262320] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.262323] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.262326] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.262330] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.262333] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.262338] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.262341] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.262347] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.262350] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.262355] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.262356] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.262357] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] [ 0.262359] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window] [ 0.262360] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.262361] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.262362] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff] [ 0.262363] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.262364] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff] [ 0.262366] pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff] [ 0.262367] pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff] [ 0.262937] PCI: CLS 0 bytes, default 64 [ 0.262981] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint [ 0.263118] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit] [ 0.263250] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0 [ 0.263254] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1 [ 0.263265] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.263266] software IO TLB: mapped [mem 0x000000005e25f000-0x000000006225f000] (64MB) [ 0.263309] Unpacking initramfs... [ 0.263319] sgx: EPC section 0x70200000-0x75f7ffff [ 0.263772] sgx: SGX disabled: SGX launch control CPU feature is not available, /dev/sgx_enclave disabled. [ 0.264278] Initialise system trusted keyrings [ 0.264290] Key type blacklist registered [ 0.264401] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.264435] zbud: loaded [ 0.264646] fuse: init (API version 7.42) [ 0.264912] Key type asymmetric registered [ 0.264917] Asymmetric key parser 'x509' registered [ 0.294620] Freeing initrd memory: 16204K [ 0.297327] alg: self-tests disabled [ 0.297385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.297410] io scheduler mq-deadline registered [ 0.298014] ledtrig-cpu: registered to indicate activity on CPUs [ 0.298708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.300729] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.300731] ACPI: thermal: Thermal Zone [THM] (25 C) [ 0.300887] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.301470] hpet_acpi_add: no address or irqs in _CRS [ 0.313183] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4) [ 0.347276] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.351839] i8042: Warning: Keylock active [ 0.354004] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.354008] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.354177] mousedev: PS/2 mouse device common for all mice [ 0.354218] rtc_cmos 00:01: RTC can wake from S4 [ 0.354969] rtc_cmos 00:01: registered as rtc0 [ 0.355123] rtc_cmos 00:01: setting system clock to 2025-03-20T06:51:50 UTC (1742453510) [ 0.355145] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.355270] intel_pstate: Intel P-state driver initializing [ 0.355478] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.355533] intel_pstate: HWP enabled [ 0.355753] efifb: probing for efifb [ 0.355763] efifb: framebuffer at 0x90000000, using 22500k, total 22500k [ 0.355765] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 0.355766] efifb: scrolling: redraw [ 0.355766] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.355869] Console: switching to colour frame buffer device 200x56 [ 0.359127] fb0: EFI VGA frame buffer device [ 0.359264] NET: Registered PF_INET6 protocol family [ 0.362398] Segment Routing with IPv6 [ 0.362415] In-situ OAM (IOAM) with IPv6 [ 0.362436] mip6: Mobile IPv6 [ 0.362440] NET: Registered PF_PACKET protocol family [ 0.362463] mpls_gso: MPLS GSO support [ 0.362628] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.362656] microcode: Current revision: 0x000000f6 [ 0.362657] microcode: Updated early from: 0x000000f0 [ 0.362711] IPI shorthand broadcast: enabled [ 0.363625] sched_clock: Marking stable (356684362, 6016883)->(375839208, -13137963) [ 0.363745] registered taskstats version 1 [ 0.363809] Loading compiled-in X.509 certificates [ 0.365223] Demotion targets for Node 0: null [ 0.365251] Key type .fscrypt registered [ 0.365252] Key type fscrypt-provisioning registered [ 0.369333] cryptd: max_cpu_qlen set to 1000 [ 0.369925] AES CTR mode by8 optimization enabled [ 0.378190] Key type encrypted registered [ 0.378195] AppArmor: AppArmor sha256 policy hashing enabled [ 0.378624] RAS: Correctable Errors collector initialized. [ 0.387235] clk: Disabling unused clocks [ 0.388098] Freeing unused decrypted memory: 2036K [ 0.388530] Freeing unused kernel image (initmem) memory: 2924K [ 0.388550] Write protecting the kernel read-only data: 24576k [ 0.388759] Freeing unused kernel image (text/rodata gap) memory: 184K [ 0.388774] Freeing unused kernel image (rodata/data gap) memory: 12K [ 0.399347] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.399352] Run /init as init process [ 0.399353] with arguments: [ 0.399354] /init [ 0.399355] with environment: [ 0.399356] HOME=/ [ 0.399357] TERM=linux [ 0.399357] BOOT_IMAGE=/vmlinuz-6.14.0-rc7-00074-ga7f2e10ecd8f [ 0.490340] nvme nvme0: pci function 0000:3c:00.0 [ 0.506387] nvme nvme0: 4/0/0 default/read/poll queues [ 0.513587] nvme0n1: p1 p2 p3 p4 [ 0.554648] device-mapper: uevent: version 1.0.3 [ 0.554760] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev [ 1.290302] tsc: Refined TSC clocksource calibration: 2904.007 MHz [ 1.290323] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0c50045, max_idle_ns: 440795208304 ns [ 1.290391] clocksource: Switched to clocksource tsc [ 57.737121] PM: Image not found (code -22) [ 57.813193] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none. [ 57.935680] systemd[1]: Inserted module 'autofs4' [ 57.978518] systemd[1]: systemd 257.4-3 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 57.978535] systemd[1]: Detected architecture x86-64. [ 57.982287] systemd[1]: Hostname set to . [ 58.284886] systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 58.319173] systemd-sysv-generator[375]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 58.319177] systemd-sysv-generator[375]: Please update package to include a native systemd unit file. [ 58.319179] systemd-sysv-generator[375]: ! This compatibility logic is deprecated, expect removal soon. ! [ 58.433870] systemd[1]: Queued start job for default target graphical.target. [ 58.458959] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 58.459247] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 58.459479] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice. [ 58.459712] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 58.459866] systemd[1]: Created slice user.slice - User and Session Slice. [ 58.459908] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 58.459938] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 58.460086] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 58.460102] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4... [ 58.460110] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8... [ 58.460117] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5... [ 58.460122] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653... [ 58.460138] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 58.460161] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 58.460172] systemd[1]: Reached target paths.target - Path Units. [ 58.460192] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 58.460201] systemd[1]: Reached target slices.target - Slice Units. [ 58.460225] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 58.461509] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 58.462370] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 58.462442] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 58.462508] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 58.462578] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 58.462616] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 58.462631] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 58.462687] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 58.462727] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 58.464168] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 58.464818] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 58.465867] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 58.470189] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 58.471144] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 58.474196] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 58.475375] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 58.481015] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 58.482152] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 58.486217] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 58.486329] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 58.487678] systemd[1]: Starting systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info... [ 58.493063] systemd[1]: Starting systemd-journald.service - Journal Service... [ 58.498205] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 58.498235] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 58.499156] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 58.499206] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 58.508320] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 58.509254] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 58.511239] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 58.511351] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 58.511441] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. [ 58.511528] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 58.511609] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 58.512297] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 58.512606] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 58.512779] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 58.513033] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 58.513195] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 58.513477] systemd[1]: Finished systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info. [ 58.514657] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 58.516619] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 58.516901] pstore: Using crash dump compression: deflate [ 58.522910] pstore: Registered efi_pstore as persistent store backend [ 58.525307] ACPI: bus type drm_connector registered [ 58.525402] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 58.528726] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 58.529213] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 58.530923] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 58.533038] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 58.535628] lp: driver loaded but no devices found [ 58.536170] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 58.536790] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 58.536905] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 58.539188] ppdev: user-space parallel port driver [ 58.540789] systemd-journald[390]: Collecting audit messages is disabled. [ 58.550972] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 58.551325] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none. [ 58.552007] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 58.552767] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 58.553048] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 58.553385] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 58.553433] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 58.558332] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 58.558404] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 58.560140] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization... [ 58.560945] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 58.560970] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 58.570532] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 58.575491] systemd[1]: Started systemd-journald.service - Journal Service. [ 58.612149] systemd-journald[390]: Received client request to flush runtime journal. [ 58.791118] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input16 [ 58.813557] input: Intel HID events as /devices/platform/INT33D5:00/input/input17 [ 58.816838] ACPI: bus type USB registered [ 58.816875] usbcore: registered new interface driver usbfs [ 58.816890] usbcore: registered new interface driver hub [ 58.816904] usbcore: registered new device driver usb [ 58.817109] intel-hid INT33D5:00: platform supports 5 button array [ 58.817151] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input18 [ 58.818820] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 58.819399] ACPI: button: Lid Switch [LID0] [ 58.819490] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input19 [ 58.820438] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 58.820952] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 58.822642] ACPI: button: Power Button [PBTN] [ 58.823833] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input20 [ 58.824604] ACPI: button: Sleep Button [SBTN] [ 58.824679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input21 [ 58.824915] ACPI: button: Power Button [PWRF] [ 58.830831] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found [ 58.835345] ACPI: AC: AC Adapter [AC] (off-line) [ 58.847422] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input22 [ 58.888215] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS [ 58.908669] ACPI: battery: Slot [BAT0] (battery present) [ 58.911084] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 58.911097] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 58.912185] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 58.916664] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 58.916672] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 58.916685] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 58.917905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 58.917911] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 58.917914] usb usb1: Product: xHCI Host Controller [ 58.917916] usb usb1: Manufacturer: Linux 6.14.0-rc7-00074-ga7f2e10ecd8f xhci-hcd [ 58.917919] usb usb1: SerialNumber: 0000:00:14.0 [ 58.918669] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 58.919445] intel_pmc_core INT33A1:00: initialized [ 58.939261] intel_rapl_common: Found RAPL domain package [ 58.939266] intel_rapl_common: Found RAPL domain dram [ 58.951742] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 58.977681] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 58.979697] hub 1-0:1.0: USB hub found [ 58.979794] hub 1-0:1.0: 12 ports detected [ 59.059635] input: PC Speaker as /devices/platform/pcspkr/input/input24 [ 59.060198] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002) [ 59.064745] hid: raw HID events driver (C) Jiri Kosina [ 59.077158] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 59.077163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 59.077164] usb usb2: Product: xHCI Host Controller [ 59.077166] usb usb2: Manufacturer: Linux 6.14.0-rc7-00074-ga7f2e10ecd8f xhci-hcd [ 59.077167] usb usb2: SerialNumber: 0000:00:14.0 [ 59.077450] hub 2-0:1.0: USB hub found [ 59.077460] hub 2-0:1.0: 6 ports detected [ 59.322065] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 59.617325] intel_rapl_common: Found RAPL domain package [ 59.617329] intel_rapl_common: Found RAPL domain core [ 59.617330] intel_rapl_common: Found RAPL domain uncore [ 59.617493] intel_rapl_common: Found RAPL domain dram [ 59.617495] intel_rapl_common: Found RAPL domain psys [ 59.618865] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01 [ 59.618871] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 59.621445] stackdepot: allocating hash table of 1048576 entries via kvcalloc [ 59.642804] i915 0000:00:02.0: [drm] Found kabylake/ult (device ID 5916) integrated display version 9.00 stepping B0 [ 59.644615] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 59.644623] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 59.644627] RAPL PMU: hw unit of domain package 2^-14 Joules [ 59.644630] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 59.644633] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 59.644636] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 59.646153] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 59.646193] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 59.651910] Console: switching to colour dummy device 80x25 [ 59.655494] i915 0000:00:02.0: vgaarb: deactivate vga console [ 59.660740] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 59.663307] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 59.685510] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none. [ 59.728969] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 59.746710] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 [ 59.752657] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 59.754441] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input25 [ 59.782114] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 59.790532] fbcon: i915drmfb (fb0) is primary device [ 59.795104] Console: switching to colour frame buffer device 200x56 [ 59.822536] iTCO_vendor_support: vendor-support=0 [ 59.833002] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 59.839080] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 59.841994] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 59.883035] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input26 [ 59.886515] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input27 [ 59.887150] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 [ 59.914251] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 59.922485] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11 [ 59.922490] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 59.922492] usb 1-4: Product: Touchscreen [ 59.922493] usb 1-4: Manufacturer: ELAN [ 59.930210] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 59.930414] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 59.932519] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 59.961696] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input29 [ 59.977772] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 59.983921] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 60.042064] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 60.056675] audit: type=1400 audit(1742453570.191:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=560 comm="apparmor_parser" [ 60.056689] audit: type=1400 audit(1742453570.191:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=558 comm="apparmor_parser" [ 60.056695] audit: type=1400 audit(1742453570.195:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=561 comm="apparmor_parser" [ 60.056700] audit: type=1400 audit(1742453570.195:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=559 comm="apparmor_parser" [ 60.061719] audit: type=1400 audit(1742453570.199:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=565 comm="apparmor_parser" [ 60.063863] audit: type=1400 audit(1742453570.203:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=566 comm="apparmor_parser" [ 60.063872] audit: type=1400 audit(1742453570.203:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=564 comm="apparmor_parser" [ 60.065314] ACPI: battery: new hook: Dell Primary Battery Extension [ 60.066519] audit: type=1400 audit(1742453570.207:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=569 comm="apparmor_parser" [ 60.067020] audit: type=1400 audit(1742453570.207:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=568 comm="apparmor_parser" [ 60.069098] audit: type=1400 audit(1742453570.207:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=570 comm="apparmor_parser" [ 60.113187] snd_hda_codec_realtek hdaudioC0D0: ALC3246: picked fixup (pin match) [ 60.150410] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 60.150419] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 60.150423] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 60.150427] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 60.150429] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 60.150431] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 60.150434] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 60.150437] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 60.166943] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input31 [ 60.167210] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input32 [ 60.168173] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 [ 60.211898] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002) [ 60.260384] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 60.274297] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26 [ 60.274305] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 60.274307] usb 1-5: Product: Integrated_Webcam_HD [ 60.274309] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01 [ 60.282160] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port [ 60.282193] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 60.282204] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 60.282216] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 60.282230] pci 0000:01:00.0: enabling Extended Tags [ 60.282494] pci 0000:01:00.0: supports D1 D2 [ 60.282497] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 60.282576] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 60.320866] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 60.320945] pci 0000:02:00.0: PCI bridge to [bus 03] [ 60.320970] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 60.321028] pci 0000:02:00.0: enabling Extended Tags [ 60.321254] pci 0000:02:00.0: supports D1 D2 [ 60.321257] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 60.409843] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 60.409879] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 60.409890] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 60.409903] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 60.409920] pci 0000:02:01.0: enabling Extended Tags [ 60.410045] pci 0000:02:01.0: supports D1 D2 [ 60.410048] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 60.411206] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 60.411241] pci 0000:02:02.0: PCI bridge to [bus 39] [ 60.411252] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 60.411279] pci 0000:02:02.0: enabling Extended Tags [ 60.411393] pci 0000:02:02.0: supports D1 D2 [ 60.411395] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 60.411636] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 60.411702] pci 0000:02:00.0: PCI bridge to [bus 03] [ 60.411759] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 60.411873] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint [ 60.411935] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff] [ 60.411957] pci 0000:39:00.0: enabling Extended Tags [ 60.412088] pci 0000:39:00.0: supports D1 D2 [ 60.412091] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 60.412393] pci 0000:02:02.0: PCI bridge to [bus 39] [ 60.412437] pci_bus 0000:02: Allocating resources [ 60.412453] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 60.412456] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 60.412459] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 60.412463] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 60.412466] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 60.412469] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 60.412471] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 60.412473] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 60.412478] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 60.412480] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 60.412482] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 60.412484] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 60.412485] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 60.412487] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 60.412490] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 60.412492] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 60.412494] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 60.412496] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 60.412497] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 60.412499] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 60.412502] pci 0000:02:00.0: PCI bridge to [bus 03] [ 60.412508] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 60.412517] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 60.412522] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 60.412526] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 60.412533] pci 0000:02:02.0: PCI bridge to [bus 39] [ 60.412538] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 60.412546] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 60.412551] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 60.412555] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 60.419718] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 60.419728] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 60.420868] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 60.421506] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 60.421510] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 60.421513] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 60.423644] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 60.423651] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 60.423653] usb usb3: Product: xHCI Host Controller [ 60.423655] usb usb3: Manufacturer: Linux 6.14.0-rc7-00074-ga7f2e10ecd8f xhci-hcd [ 60.423657] usb usb3: SerialNumber: 0000:39:00.0 [ 60.435084] hub 3-0:1.0: USB hub found [ 60.435133] hub 3-0:1.0: 2 ports detected [ 60.444259] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 60.444269] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 60.444274] usb usb4: Product: xHCI Host Controller [ 60.444279] usb usb4: Manufacturer: Linux 6.14.0-rc7-00074-ga7f2e10ecd8f xhci-hcd [ 60.444282] usb usb4: SerialNumber: 0000:39:00.0 [ 60.447376] hub 4-0:1.0: USB hub found [ 60.447401] hub 4-0:1.0: 2 ports detected [ 60.451003] mc: Linux media interface: v0.10 [ 60.465508] pci_bus 0000:02: Allocating resources [ 60.465534] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 60.465541] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 60.465546] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 60.465552] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 60.465558] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 60.465561] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 60.465565] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 60.465568] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 60.465574] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 60.465578] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 60.465581] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 60.465584] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 60.465587] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 60.465589] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 60.465594] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 60.465597] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 60.465600] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 60.465603] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 60.465606] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 60.465609] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 60.489959] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 60.491286] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34 [ 60.491801] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35 [ 60.493905] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 [ 60.493980] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 [ 60.495924] videodev: Linux video capture interface: v2.00 [ 60.508685] Bluetooth: Core ver 2.22 [ 60.508755] NET: Registered PF_BLUETOOTH protocol family [ 60.508762] Bluetooth: HCI device and connection manager initialized [ 60.508775] Bluetooth: HCI socket layer initialized [ 60.508789] Bluetooth: L2CAP socket layer initialized [ 60.508805] Bluetooth: SCO socket layer initialized [ 60.530655] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input38 [ 60.538547] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input39 [ 60.539339] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input40 [ 60.539631] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 60.543664] usbcore: registered new interface driver btusb [ 60.543906] usbcore: registered new interface driver usbhid [ 60.543910] usbhid: USB HID core driver [ 60.550357] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 60.550361] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 60.565045] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [ 60.565052] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 60.565147] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2 [ 60.660613] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 [ 60.686044] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 60.756415] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 60.825232] nvme nvme0: using unchecked data buffer [ 60.831748] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3 [ 60.831755] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 60.831758] usb 3-1: Product: USB2.0 Hub [ 60.831760] usb 3-1: Manufacturer: VIA Labs, Inc. [ 60.831763] usb 3-1: SerialNumber: 000000000 [ 60.833096] ath: EEPROM regdomain: 0x6c [ 60.833100] ath: EEPROM indicates we should expect a direct regpair map [ 60.833102] ath: Country alpha2 being used: 00 [ 60.833104] ath: Regpair used: 0x6c [ 60.839337] hub 3-1:1.0: USB hub found [ 60.839509] hub 3-1:1.0: 5 ports detected [ 60.863737] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 60.908888] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 60.931991] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 60.948238] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 61.007327] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3 [ 61.007336] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 61.007339] usb 4-1: Product: USB3.0 Hub [ 61.007341] usb 4-1: Manufacturer: VIA Labs, Inc. [ 61.007344] usb 4-1: SerialNumber: 000000000 [ 61.013473] hub 4-1:1.0: USB hub found [ 61.013591] hub 4-1:1.0: 4 ports detected [ 61.178934] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c) [ 61.313345] usbcore: registered new interface driver uvcvideo [ 61.363216] PPP generic driver version 2.4.2 [ 61.368566] NET: Registered PF_PPPOX protocol family [ 61.404968] Initializing XFRM netlink socket [ 61.535067] l2tp_core: L2TP core driver, V2.0 [ 61.537646] IPsec XFRM device driver [ 61.539560] l2tp_netlink: L2TP netlink interface [ 61.544261] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 61.582051] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd [ 61.723155] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4 [ 61.723161] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 61.723163] usb 3-1.1: Product: USB2.0 Hub [ 61.723165] usb 3-1.1: Manufacturer: VIA Labs, Inc. [ 61.723167] usb 3-1.1: SerialNumber: 000000000 [ 61.724437] hub 3-1.1:1.0: USB hub found [ 61.724625] hub 3-1.1:1.0: 4 ports detected [ 61.818173] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd [ 61.877740] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4 [ 61.877747] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 61.877750] usb 4-1.1: Product: USB3.0 Hub [ 61.877752] usb 4-1.1: Manufacturer: VIA Labs, Inc. [ 61.877754] usb 4-1.1: SerialNumber: 000000000 [ 61.879695] hub 4-1.1:1.0: USB hub found [ 61.879883] hub 4-1.1:1.0: 4 ports detected [ 62.060001] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd [ 62.075739] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [ 62.075748] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 62.075751] usb 4-1.4: Product: Mass Storage Device [ 62.075754] usb 4-1.4: Manufacturer: Generic [ 62.075756] usb 4-1.4: SerialNumber: 058F84688461 [ 62.096583] SCSI subsystem initialized [ 62.100912] usb-storage 4-1.4:1.0: USB Mass Storage device detected [ 62.101494] scsi host0: usb-storage 4-1.4:1.0 [ 62.101751] usbcore: registered new interface driver usb-storage [ 63.074343] usb 4-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd [ 63.090650] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 63.090657] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 63.090659] usb 4-1.1.3: Product: USB 10/100/1000 LAN [ 63.090661] usb 4-1.1.3: Manufacturer: Realtek [ 63.090663] usb 4-1.1.3: SerialNumber: 000001 [ 63.109844] usbcore: registered new device driver r8152-cfgselector [ 63.186379] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd [ 63.251333] r8152 4-1.1.3:1.0 eth0: v1.12.13 [ 63.251611] usbcore: registered new interface driver r8152 [ 63.258526] usbcore: registered new interface driver cdc_ether [ 63.259595] usbcore: registered new interface driver r8153_ecm [ 63.722415] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 63.762697] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [ 63.768745] sd 0:0:0:0: [sda] Media removed, stopped polling [ 63.769385] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 63.780775] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0 [ 64.503164] rfkill: input handler disabled [ 65.406093] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd [ 65.495075] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01 [ 65.495083] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 65.495086] usb 3-1.5: Product: USB Billboard Device [ 65.495088] usb 3-1.5: Manufacturer: VIA Labs, Inc. [ 65.495090] usb 3-1.5: SerialNumber: 0000000000000001 [ 66.598596] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on [ 69.801971] rfkill: input handler enabled [ 72.450224] rfkill: input handler disabled [ 153.412684] systemd-sysv-generator[3417]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 153.412690] systemd-sysv-generator[3417]: Please update package to include a native systemd unit file. [ 153.412692] systemd-sysv-generator[3417]: ! This compatibility logic is deprecated, expect removal soon. ! [ 3472.058267] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=414 end=415) time 184 us, min 1788, max 1799, scanline start 1780, end 1801 […] [40944.247637] PM: suspend exit [40944.315371] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [40944.315405] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [40944.552033] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [40944.673502] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [40944.697141] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [40949.990522] wlp58s0: authenticate with 48:2f:6b:7a:61:54 (local address=9c:b6:d0:d1:6a:b1) [40949.990533] wlp58s0: send auth to 48:2f:6b:7a:61:54 (try 1/3) [40949.991674] wlp58s0: authenticated [40949.995344] wlp58s0: associate with 48:2f:6b:7a:61:54 (try 1/3) [40949.996927] wlp58s0: RX AssocResp from 48:2f:6b:7a:61:54 (capab=0x411 status=0 aid=1) [40949.999631] wlp58s0: associated [41177.787480] systemd-sysv-generator[133581]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility. [41177.787489] systemd-sysv-generator[133581]: Please update package to include a native systemd unit file. [41177.787492] systemd-sysv-generator[133581]: ! This compatibility logic is deprecated, expect removal soon. ! [42307.272046] ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd) [42307.272078] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [42307.272094] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [42307.272452] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2 [42307.272825] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 [42307.272834] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [42307.283011] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16 [42307.283024] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16 [42307.283034] ath10k_pci 0000:3a:00.0: Copy Engine register dump: [42307.283050] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3 [42307.283070] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 5 5 82 83 [42307.283088] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 53 47 45 46 [42307.283104] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 13 13 14 12 [42307.283120] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 67 67 98 34 [42307.283135] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0 [42307.283151] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 22 22 24 24 [42307.283167] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0 [42307.371777] ieee80211 phy0: Hardware restart was requested [42309.383940] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info [42309.690205] ath10k_pci 0000:3a:00.0: device successfully recovered [43924.050746] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING) [43924.701604] PM: suspend entry (deep) [43924.723952] Filesystems sync: 0.022 seconds […] [43926.480171] PM: suspend exit [43926.583995] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [43926.584004] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [43926.941450] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [43926.942080] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [43926.967184] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [43932.337256] wlp58s0: authenticate with 48:2f:6b:7a:61:54 (local address=9c:b6:d0:d1:6a:b1) [43932.337275] wlp58s0: send auth to 48:2f:6b:7a:61:54 (try 1/3) [43932.338339] wlp58s0: authenticated [43932.341438] wlp58s0: associate with 48:2f:6b:7a:61:54 (try 1/3) [43932.349342] wlp58s0: RX AssocResp from 48:2f:6b:7a:61:54 (capab=0x411 status=0 aid=2) [43932.352610] wlp58s0: associated [45546.223150] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING) [45547.860974] PM: suspend entry (deep) [45547.875388] Filesystems sync: 0.014 seconds [45547.879990] Freezing user space processes [45547.881818] Freezing user space processes completed (elapsed 0.001 seconds) [45547.881822] OOM killer disabled. [45547.881823] Freezing remaining freezable tasks [45547.883246] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [45547.883295] printk: Suspending console(s) (use no_console_suspend to debug) [45548.477573] ACPI: EC: interrupt blocked [45548.506094] ACPI: PM: Preparing to enter system sleep state S3 [45548.515499] ACPI: EC: event blocked [45548.515503] ACPI: EC: EC stopped [45548.515505] ACPI: PM: Saving platform NVS memory [45548.518682] Disabling non-boot CPUs ... [45548.520706] smpboot: CPU 3 is now offline [45548.527276] smpboot: CPU 2 is now offline [45548.529738] smpboot: CPU 1 is now offline [45548.536761] ACPI: PM: Low-level resume complete [45548.536806] ACPI: EC: EC started [45548.536807] ACPI: PM: Restoring platform NVS memory [45548.538720] Enabling non-boot CPUs ... [45548.538752] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45548.539464] CPU1 is up [45548.539479] smpboot: Booting Node 0 Processor 2 APIC 0x1 [45548.540210] CPU2 is up [45548.540226] smpboot: Booting Node 0 Processor 3 APIC 0x3 [45548.540917] CPU3 is up [45548.543752] ACPI: PM: Waking up from system sleep state S3 [45548.573021] ACPI: EC: interrupt unblocked [45548.588951] ACPI: EC: event unblocked [45548.600764] nvme nvme0: 4/0/0 default/read/poll queues [45548.841211] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [45548.845300] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [45549.101211] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [45549.357262] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [45549.497348] OOM killer enabled. [45549.497352] Restarting tasks ... done. [45549.498857] random: crng reseeded on system resumption [45549.603814] PM: suspend exit [45549.700720] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [45549.700737] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [45550.056566] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [45550.075544] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [45550.079992] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [45555.195679] wlp58s0: authenticate with 48:2f:6b:7a:61:54 (local address=9c:b6:d0:d1:6a:b1) [45555.195686] wlp58s0: send auth to 48:2f:6b:7a:61:54 (try 1/3) [45555.196725] wlp58s0: authenticated [45555.197182] wlp58s0: associate with 48:2f:6b:7a:61:54 (try 1/3) [45555.198655] wlp58s0: RX AssocResp from 48:2f:6b:7a:61:54 (capab=0x411 status=0 aid=2) [45555.201105] wlp58s0: associated [45602.352436] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING) [45603.950248] PM: suspend entry (deep) [45603.969444] Filesystems sync: 0.019 seconds [45603.972179] Freezing user space processes [45603.974028] Freezing user space processes completed (elapsed 0.001 seconds) [45603.974032] OOM killer disabled. [45603.974033] Freezing remaining freezable tasks [45603.975611] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [45603.975662] printk: Suspending console(s) (use no_console_suspend to debug) [45604.595526] ACPI: EC: interrupt blocked [45604.624952] ACPI: PM: Preparing to enter system sleep state S3 [45604.635123] ACPI: EC: event blocked [45604.635128] ACPI: EC: EC stopped [45604.635130] ACPI: PM: Saving platform NVS memory [45604.638469] Disabling non-boot CPUs ... [45604.640532] smpboot: CPU 3 is now offline [45604.643606] smpboot: CPU 2 is now offline [45604.648508] smpboot: CPU 1 is now offline [45604.653880] ACPI: PM: Low-level resume complete [45604.653925] ACPI: EC: EC started [45604.653926] ACPI: PM: Restoring platform NVS memory [45604.655844] Enabling non-boot CPUs ... [45604.655870] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45604.656587] CPU1 is up [45604.656601] smpboot: Booting Node 0 Processor 2 APIC 0x1 [45604.657355] CPU2 is up [45604.657371] smpboot: Booting Node 0 Processor 3 APIC 0x3 [45604.658083] CPU3 is up [45604.660927] ACPI: PM: Waking up from system sleep state S3 [45604.697696] ACPI: EC: interrupt unblocked [45604.728244] ACPI: EC: event unblocked [45604.740654] nvme nvme0: 4/0/0 default/read/poll queues [45604.963185] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [45604.983315] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [45605.239177] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [45605.495238] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [45605.634690] OOM killer enabled. [45605.634694] Restarting tasks ... done. [45605.636276] random: crng reseeded on system resumption [45605.766587] PM: suspend exit [45605.843004] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [45605.843019] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [45606.189461] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [45606.202490] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [45606.228908] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [45611.680187] wlp58s0: authenticate with 24:f2:7f:f6:18:b2 (local address=9c:b6:d0:d1:6a:b1) [45611.680204] wlp58s0: send auth to 24:f2:7f:f6:18:b2 (try 1/3) [45611.681221] wlp58s0: authenticated [45611.687224] wlp58s0: associate with 24:f2:7f:f6:18:b2 (try 1/3) [45611.689150] wlp58s0: RX AssocResp from 24:f2:7f:f6:18:b2 (capab=0x411 status=0 aid=1) [45611.692511] wlp58s0: associated [45632.707555] wlp58s0: deauthenticating from 24:f2:7f:f6:18:b2 by local choice (Reason: 3=DEAUTH_LEAVING) [45639.623889] wlp58s0: authenticate with 24:f2:7f:f6:18:b2 (local address=9c:b6:d0:d1:6a:b1) [45639.623905] wlp58s0: send auth to 24:f2:7f:f6:18:b2 (try 1/3) [45639.625131] wlp58s0: authenticated [45639.627043] wlp58s0: associate with 24:f2:7f:f6:18:b2 (try 1/3) [45639.628691] wlp58s0: RX AssocResp from 24:f2:7f:f6:18:b2 (capab=0x411 status=0 aid=1) [45639.631557] wlp58s0: associated [45980.844149] wlp58s0: deauthenticating from 24:f2:7f:f6:18:b2 by local choice (Reason: 3=DEAUTH_LEAVING) [45982.530058] PM: suspend entry (deep) [45982.549652] Filesystems sync: 0.019 seconds [45982.552413] Freezing user space processes [45982.554282] Freezing user space processes completed (elapsed 0.001 seconds) [45982.554285] OOM killer disabled. [45982.554286] Freezing remaining freezable tasks [45982.555869] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [45982.555921] printk: Suspending console(s) (use no_console_suspend to debug) [45983.148213] ACPI: EC: interrupt blocked [45983.176968] ACPI: PM: Preparing to enter system sleep state S3 [45983.187162] ACPI: EC: event blocked [45983.187167] ACPI: EC: EC stopped [45983.187169] ACPI: PM: Saving platform NVS memory [45983.190440] Disabling non-boot CPUs ... [45983.192461] smpboot: CPU 3 is now offline [45983.195591] smpboot: CPU 2 is now offline [45983.199506] smpboot: CPU 1 is now offline [45983.207339] ACPI: PM: Low-level resume complete [45983.207382] ACPI: EC: EC started [45983.207383] ACPI: PM: Restoring platform NVS memory [45983.209277] Enabling non-boot CPUs ... [45983.209304] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45983.210018] CPU1 is up [45983.210033] smpboot: Booting Node 0 Processor 2 APIC 0x1 [45983.210782] CPU2 is up [45983.210800] smpboot: Booting Node 0 Processor 3 APIC 0x3 [45983.211511] CPU3 is up [45983.214375] ACPI: PM: Waking up from system sleep state S3 [45983.248731] ACPI: EC: interrupt unblocked [45983.264320] ACPI: EC: event unblocked [45983.278084] nvme nvme0: 4/0/0 default/read/poll queues [45983.501358] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [45983.521373] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [45983.666109] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [45983.777373] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [45984.033379] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [45984.236091] OOM killer enabled. [45984.236096] Restarting tasks ... done. [45984.237849] random: crng reseeded on system resumption [45984.358161] PM: suspend exit [45984.443769] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [45984.443784] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [45984.805346] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [45984.822173] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [45984.835102] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [45990.110590] wlp58s0: authenticate with 24:f2:7f:f6:18:b2 (local address=9c:b6:d0:d1:6a:b1) [45990.110599] wlp58s0: send auth to 24:f2:7f:f6:18:b2 (try 1/3) [45990.111690] wlp58s0: authenticated [45990.117322] wlp58s0: associate with 24:f2:7f:f6:18:b2 (try 1/3) [45990.118973] wlp58s0: RX AssocResp from 24:f2:7f:f6:18:b2 (capab=0x411 status=0 aid=1) [45990.121673] wlp58s0: associated [46842.892440] wlp58s0: deauthenticating from 24:f2:7f:f6:18:b2 by local choice (Reason: 3=DEAUTH_LEAVING) [46844.559052] PM: suspend entry (deep) [46844.585208] Filesystems sync: 0.026 seconds [46844.587869] Freezing user space processes [46844.589732] Freezing user space processes completed (elapsed 0.001 seconds) [46844.589735] OOM killer disabled. [46844.589736] Freezing remaining freezable tasks [46844.591357] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [46844.591409] printk: Suspending console(s) (use no_console_suspend to debug) [46845.203848] ACPI: EC: interrupt blocked [46845.235022] ACPI: PM: Preparing to enter system sleep state S3 [46845.246392] ACPI: EC: event blocked [46845.246397] ACPI: EC: EC stopped [46845.246399] ACPI: PM: Saving platform NVS memory [46845.249649] Disabling non-boot CPUs ... [46845.251648] smpboot: CPU 3 is now offline [46845.255376] smpboot: CPU 2 is now offline [46845.259549] smpboot: CPU 1 is now offline [46845.266603] ACPI: PM: Low-level resume complete [46845.266648] ACPI: EC: EC started [46845.266649] ACPI: PM: Restoring platform NVS memory [46845.268546] Enabling non-boot CPUs ... [46845.268570] smpboot: Booting Node 0 Processor 1 APIC 0x2 [46845.269279] CPU1 is up [46845.269295] smpboot: Booting Node 0 Processor 2 APIC 0x1 [46845.270027] CPU2 is up [46845.270043] smpboot: Booting Node 0 Processor 3 APIC 0x3 [46845.270740] CPU3 is up [46845.273592] ACPI: PM: Waking up from system sleep state S3 [46845.304524] ACPI: EC: interrupt unblocked [46845.321396] ACPI: EC: event unblocked [46845.333789] nvme nvme0: 4/0/0 default/read/poll queues [46845.548917] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [46845.572893] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [46845.714358] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [46845.828970] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [46846.084962] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [46846.224115] OOM killer enabled. [46846.224118] Restarting tasks ... done. [46846.225951] random: crng reseeded on system resumption [46846.333128] PM: suspend exit [46846.429471] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [46846.429486] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [46846.786648] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [46846.795760] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [46846.814587] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [46852.561553] wlp58s0: authenticate with 24:1f:bd:69:ac:95 (local address=9c:b6:d0:d1:6a:b1) [46852.561580] wlp58s0: send auth to 24:1f:bd:69:ac:95 (try 1/3) [46852.563180] wlp58s0: authenticated [46852.564900] wlp58s0: associate with 24:1f:bd:69:ac:95 (try 1/3) [46852.567772] wlp58s0: RX AssocResp from 24:1f:bd:69:ac:95 (capab=0x11 status=0 aid=1) [46852.570966] wlp58s0: associated [46852.585392] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:1f:bd:69:ac:95 [46943.706853] wlp58s0: deauthenticating from 24:1f:bd:69:ac:95 by local choice (Reason: 3=DEAUTH_LEAVING) [46945.616415] PM: suspend entry (deep) [46945.635268] Filesystems sync: 0.018 seconds [46945.638039] Freezing user space processes [46945.640083] Freezing user space processes completed (elapsed 0.002 seconds) [46945.640086] OOM killer disabled. [46945.640087] Freezing remaining freezable tasks [46945.641695] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [46945.641748] printk: Suspending console(s) (use no_console_suspend to debug) [46946.231339] ACPI: EC: interrupt blocked [46946.257752] ACPI: PM: Preparing to enter system sleep state S3 [46946.267882] ACPI: EC: event blocked [46946.267886] ACPI: EC: EC stopped [46946.267888] ACPI: PM: Saving platform NVS memory [46946.271215] Disabling non-boot CPUs ... [46946.274273] smpboot: CPU 3 is now offline [46946.277882] smpboot: CPU 2 is now offline [46946.282918] smpboot: CPU 1 is now offline [46946.288081] ACPI: PM: Low-level resume complete [46946.288126] ACPI: EC: EC started [46946.288127] ACPI: PM: Restoring platform NVS memory [46946.290048] Enabling non-boot CPUs ... [46946.290077] smpboot: Booting Node 0 Processor 1 APIC 0x2 [46946.290803] CPU1 is up [46946.290817] smpboot: Booting Node 0 Processor 2 APIC 0x1 [46946.291571] CPU2 is up [46946.291589] smpboot: Booting Node 0 Processor 3 APIC 0x3 [46946.292300] CPU3 is up [46946.295129] ACPI: PM: Waking up from system sleep state S3 [46946.326968] ACPI: EC: interrupt unblocked [46946.343453] ACPI: EC: event unblocked [46946.356285] nvme nvme0: 4/0/0 default/read/poll queues [46946.582641] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [46946.594690] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [46946.850699] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [46947.106688] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [46947.309595] OOM killer enabled. [46947.309605] Restarting tasks ... done. [46947.314431] random: crng reseeded on system resumption [46947.428226] PM: suspend exit [46947.512476] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [46947.512487] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [46947.834645] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [46947.867889] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [46947.892367] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [46953.466589] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1) [46953.466595] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3) [46953.480752] wlp58s0: authenticated [46953.482626] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3) [46953.488910] wlp58s0: RX AssocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=3) [46953.491524] wlp58s0: associated [46953.591587] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef [46989.361932] wlp58s0: disassociated from a4:9b:cd:c7:a3:ef (Reason: 1=UNSPECIFIED) [46989.536419] wlp58s0: authenticate with a4:9b:cd:c4:85:8f (local address=9c:b6:d0:d1:6a:b1) [46989.536440] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 1/3) [46990.110099] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 2/3) [46991.126510] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 3/3) [46991.520100] wlp58s0: authenticated [46991.522488] wlp58s0: associate with a4:9b:cd:c4:85:8f (try 1/3) [46991.558878] wlp58s0: RX AssocResp from a4:9b:cd:c4:85:8f (capab=0x1111 status=0 aid=9) [46991.562354] wlp58s0: associated [46991.609110] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c4:85:8f [47029.090697] wlp58s0: disconnect from AP a4:9b:cd:c4:85:8f for new auth to a4:9b:cd:c7:a3:ef [47029.171969] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1) [47029.171986] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3) [47029.175119] wlp58s0: authenticated [47029.178204] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3) [47029.210029] wlp58s0: RX ReassocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=2) [47029.212425] wlp58s0: associated [47029.253793] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef [47141.698449] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [47142.499217] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1) [47142.499244] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3) [47142.501043] wlp58s0: authenticated [47142.509659] wlp58s0: associate with a4:9b:cd:c7:ab:2f (try 1/3) [47142.519019] wlp58s0: RX AssocResp from a4:9b:cd:c7:ab:2f (capab=0x1111 status=0 aid=170) [47142.522633] wlp58s0: associated [47142.585272] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:ab:2f [47180.041913] wlp58s0: disconnect from AP a4:9b:cd:c7:ab:2f for new auth to a4:9b:cd:c7:a3:ef [47180.133930] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1) [47180.133938] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3) [47180.135224] wlp58s0: authenticated [47180.141388] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3) [47180.148280] wlp58s0: RX ReassocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=4) [47180.150766] wlp58s0: associated [47180.165684] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef [47211.433771] wlp58s0: disconnect from AP a4:9b:cd:c7:a3:ef for new auth to a4:9b:cd:c7:ab:2f [47211.513713] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1) [47211.513719] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3) [47211.617319] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 2/3) [47211.619570] wlp58s0: authenticated [47211.625409] wlp58s0: associate with a4:9b:cd:c7:ab:2f (try 1/3) [47211.631335] wlp58s0: RX ReassocResp from a4:9b:cd:c7:ab:2f (capab=0x1111 status=0 aid=173) [47211.634494] wlp58s0: associated [47211.650682] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:ab:2f [47249.061247] wlp58s0: disconnect from AP a4:9b:cd:c7:ab:2f for new auth to a4:9b:cd:c4:85:8f [47249.144675] wlp58s0: authenticate with a4:9b:cd:c4:85:8f (local address=9c:b6:d0:d1:6a:b1) [47249.144684] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 1/3) [47249.145795] wlp58s0: authenticated [47249.161024] wlp58s0: associate with a4:9b:cd:c4:85:8f (try 1/3) [47249.169807] wlp58s0: RX ReassocResp from a4:9b:cd:c4:85:8f (capab=0x1111 status=0 aid=10) [47249.172217] wlp58s0: associated [47249.210978] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c4:85:8f [47286.549318] wlp58s0: disconnect from AP a4:9b:cd:c4:85:8f for new auth to a4:9b:cd:c7:a3:ef [47286.628770] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1) [47286.628778] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3) [47286.630007] wlp58s0: authenticated [47286.632825] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3) [47286.638196] wlp58s0: RX ReassocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=2) [47286.641001] wlp58s0: associated [47286.649249] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef [47305.049220] wlp58s0: disconnect from AP a4:9b:cd:c7:a3:ef for new auth to a4:9b:cd:c7:ab:2f [47305.126810] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1) [47305.126826] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3) [47305.128645] wlp58s0: authenticated [47305.136798] wlp58s0: associate with a4:9b:cd:c7:ab:2f (try 1/3) [47305.143351] wlp58s0: RX ReassocResp from a4:9b:cd:c7:ab:2f (capab=0x1111 status=0 aid=176) [47305.146614] wlp58s0: associated [47305.249063] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:ab:2f [47342.518977] wlp58s0: disconnect from AP a4:9b:cd:c7:ab:2f for new auth to a4:9b:cd:c7:a3:ef [47342.597218] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1) [47342.597233] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3) [47342.598638] wlp58s0: authenticated [47342.604594] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3) [47342.636042] wlp58s0: RX ReassocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=7) [47342.638642] wlp58s0: associated [47342.726112] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef [47402.512536] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [47402.556359] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [47403.497595] wlp58s0: authenticate with a4:9b:cd:c4:85:8f (local address=9c:b6:d0:d1:6a:b1) [47403.497620] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 1/3) [47403.499320] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 2/3) [47403.500622] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 3/3) [47403.501856] wlp58s0: authentication with a4:9b:cd:c4:85:8f timed out [47404.547189] wlp58s0: authenticate with a4:9b:cd:c7:aa:ef (local address=9c:b6:d0:d1:6a:b1) [47404.547209] wlp58s0: send auth to a4:9b:cd:c7:aa:ef (try 1/3) [47404.548367] wlp58s0: authenticated [47404.552214] wlp58s0: associate with a4:9b:cd:c7:aa:ef (try 1/3) [47404.559226] wlp58s0: RX AssocResp from a4:9b:cd:c7:aa:ef (capab=0x1111 status=0 aid=1) [47404.561968] wlp58s0: associated [47404.572484] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:aa:ef [47417.655140] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1) [47417.655164] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3) [47417.656392] wlp58s0: authenticated [47417.660163] wlp58s0: associate with a4:9b:cd:c7:ab:2f (try 1/3) [47417.668182] wlp58s0: RX AssocResp from a4:9b:cd:c7:ab:2f (capab=0x1111 status=0 aid=180) [47417.671315] wlp58s0: associated [47417.711886] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:ab:2f [47430.416354] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [47430.424160] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [47431.197066] wlp58s0: authenticate with a4:9b:cd:c7:aa:ef (local address=9c:b6:d0:d1:6a:b1) [47431.197092] wlp58s0: send auth to a4:9b:cd:c7:aa:ef (try 1/3) [47431.198778] wlp58s0: send auth to a4:9b:cd:c7:aa:ef (try 2/3) [47431.200093] wlp58s0: send auth to a4:9b:cd:c7:aa:ef (try 3/3) [47431.201559] wlp58s0: authentication with a4:9b:cd:c7:aa:ef timed out [47436.640108] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1) [47436.640114] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3) [47436.642470] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 2/3) [47436.643666] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 3/3) [47436.644943] wlp58s0: authentication with a4:9b:cd:c7:ab:2f timed out [47608.382649] wlp58s0: authenticate with 78:72:5d:f5:2c:9f (local address=9c:b6:d0:d1:6a:b1) [47608.382654] wlp58s0: send auth to 78:72:5d:f5:2c:9f (try 1/3) [47608.384080] wlp58s0: authenticated [47608.387126] wlp58s0: associate with 78:72:5d:f5:2c:9f (try 1/3) [47608.391122] wlp58s0: associate with 78:72:5d:f5:2c:9f (try 2/3) [47608.395339] wlp58s0: RX AssocResp from 78:72:5d:f5:2c:9f (capab=0x1111 status=0 aid=1) [47608.397635] wlp58s0: associated [47608.487503] wlp58s0: Limiting TX power to 17 dBm as advertised by 78:72:5d:f5:2c:9f [47608.883573] wlp58s0: deauthenticating from 78:72:5d:f5:2c:9f by local choice (Reason: 3=DEAUTH_LEAVING) [47765.276438] wlp58s0: authenticate with 2c:57:41:97:3d:8f (local address=9c:b6:d0:d1:6a:b1) [47765.276452] wlp58s0: send auth to 2c:57:41:97:3d:8f (try 1/3) [47765.277897] wlp58s0: send auth to 2c:57:41:97:3d:8f (try 2/3) [47765.279509] wlp58s0: send auth to 2c:57:41:97:3d:8f (try 3/3) [47765.382336] wlp58s0: authentication with 2c:57:41:97:3d:8f timed out [47766.250076] wlp58s0: authenticate with 2c:57:41:97:3d:80 (local address=9c:b6:d0:d1:6a:b1) [47766.250083] wlp58s0: send auth to 2c:57:41:97:3d:80 (try 1/3) [47766.254036] wlp58s0: authenticated [47766.258268] wlp58s0: associate with 2c:57:41:97:3d:80 (try 1/3) [47766.362286] wlp58s0: associate with 2c:57:41:97:3d:80 (try 2/3) [47766.466306] wlp58s0: associate with 2c:57:41:97:3d:80 (try 3/3) [47766.570318] wlp58s0: association with 2c:57:41:97:3d:80 timed out [47767.673743] wlp58s0: authenticate with 00:fe:c8:8c:5e:ef (local address=9c:b6:d0:d1:6a:b1) [47767.673758] wlp58s0: send auth to 00:fe:c8:8c:5e:ef (try 1/3) [47767.674665] wlp58s0: authenticated [47767.686865] wlp58s0: associate with 00:fe:c8:8c:5e:ef (try 1/3) [47767.690102] wlp58s0: RX AssocResp from 00:fe:c8:8c:5e:ef (capab=0x1111 status=0 aid=3) [47767.693720] wlp58s0: associated [47767.742147] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:fe:c8:8c:5e:ef [47794.190321] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [47794.199056] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [47795.193259] wlp58s0: authenticate with 2c:57:41:97:7c:e0 (local address=9c:b6:d0:d1:6a:b1) [47795.193283] wlp58s0: send auth to 2c:57:41:97:7c:e0 (try 1/3) [47795.194895] wlp58s0: send auth to 2c:57:41:97:7c:e0 (try 2/3) [47795.197528] wlp58s0: send auth to 2c:57:41:97:7c:e0 (try 3/3) [47795.203374] wlp58s0: authentication with 2c:57:41:97:7c:e0 timed out [47796.609089] wlp58s0: authenticate with 2c:57:41:97:7c:ef (local address=9c:b6:d0:d1:6a:b1) [47796.609109] wlp58s0: send auth to 2c:57:41:97:7c:ef (try 1/3) [47796.611289] wlp58s0: send auth to 2c:57:41:97:7c:ef (try 2/3) [47796.612653] wlp58s0: send auth to 2c:57:41:97:7c:ef (try 3/3) [47796.614035] wlp58s0: authentication with 2c:57:41:97:7c:ef timed out [47797.993041] wlp58s0: authenticate with 00:fe:c8:8c:5e:ef (local address=9c:b6:d0:d1:6a:b1) [47797.993056] wlp58s0: send auth to 00:fe:c8:8c:5e:ef (try 1/3) [47797.994413] wlp58s0: send auth to 00:fe:c8:8c:5e:ef (try 2/3) [47797.995730] wlp58s0: send auth to 00:fe:c8:8c:5e:ef (try 3/3) [47797.997289] wlp58s0: authentication with 00:fe:c8:8c:5e:ef timed out [48289.399698] wlp58s0: authenticate with a8:3a:79:0e:7f:c3 (local address=9c:b6:d0:d1:6a:b1) [48289.399711] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 1/3) [48289.404909] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 2/3) [48289.410259] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 3/3) [48289.463925] wlp58s0: authenticated [48289.467532] wlp58s0: associate with a8:3a:79:0e:7f:c3 (try 1/3) [48289.505747] wlp58s0: RX AssocResp from a8:3a:79:0e:7f:c3 (capab=0x1421 status=0 aid=61) [48289.508804] wlp58s0: associated [48289.511544] wlp58s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:3a:79:0e:7f:c3 [48317.360731] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a8:3a:79:0e:7f:c3 [48318.501262] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a8:3a:79:0e:7f:c3 [48319.677957] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a8:3a:79:0e:7f:c3 [48320.858854] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a8:3a:79:0e:7f:c3 [48321.803546] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [48321.812690] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [48322.208218] wlp58s0: authenticate with a8:3a:79:0e:7f:c3 (local address=9c:b6:d0:d1:6a:b1) [48322.208249] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 1/3) [48322.213221] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 2/3) [48322.218080] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 3/3) [48322.223142] wlp58s0: authentication with a8:3a:79:0e:7f:c3 timed out [48411.144565] wlp58s0: authenticate with 14:16:9d:19:28:8f (local address=9c:b6:d0:d1:6a:b1) [48411.144578] wlp58s0: send auth to 14:16:9d:19:28:8f (try 1/3) [48411.146557] wlp58s0: authenticated [48411.150849] wlp58s0: associate with 14:16:9d:19:28:8f (try 1/3) [48411.254931] wlp58s0: associate with 14:16:9d:19:28:8f (try 2/3) [48411.359820] wlp58s0: associate with 14:16:9d:19:28:8f (try 3/3) [48411.363819] wlp58s0: association with 14:16:9d:19:28:8f timed out [48416.379880] wlp58s0: authenticate with 14:16:9d:1f:11:6f (local address=9c:b6:d0:d1:6a:b1) [48416.379895] wlp58s0: send auth to 14:16:9d:1f:11:6f (try 1/3) [48416.381320] wlp58s0: send auth to 14:16:9d:1f:11:6f (try 2/3) [48416.382812] wlp58s0: send auth to 14:16:9d:1f:11:6f (try 3/3) [48416.384108] wlp58s0: authentication with 14:16:9d:1f:11:6f timed out [48421.825928] wlp58s0: authenticate with 14:16:9d:19:28:8f (local address=9c:b6:d0:d1:6a:b1) [48421.825944] wlp58s0: send auth to 14:16:9d:19:28:8f (try 1/3) [48421.827311] wlp58s0: send auth to 14:16:9d:19:28:8f (try 2/3) [48421.828751] wlp58s0: send auth to 14:16:9d:19:28:8f (try 3/3) [48421.830012] wlp58s0: authentication with 14:16:9d:19:28:8f timed out [48520.772903] wlp58s0: authenticate with 76:42:7f:42:10:af (local address=9c:b6:d0:d1:6a:b1) [48520.772910] wlp58s0: send auth to 76:42:7f:42:10:af (try 1/3) [48520.777539] wlp58s0: authenticated [48520.778238] wlp58s0: associate with 76:42:7f:42:10:af (try 1/3) [48520.783525] wlp58s0: RX AssocResp from 76:42:7f:42:10:af (capab=0x1511 status=0 aid=1) [48520.786847] wlp58s0: associated [48520.836737] wlp58s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 76:42:7f:42:10:af [48524.828845] wlp58s0: disassociated from 76:42:7f:42:10:af (Reason: 2=PREV_AUTH_NOT_VALID) [48577.107085] PM: suspend entry (deep) [48577.122041] Filesystems sync: 0.014 seconds [48577.126581] Freezing user space processes [48577.128517] Freezing user space processes completed (elapsed 0.001 seconds) [48577.128521] OOM killer disabled. [48577.128522] Freezing remaining freezable tasks [48577.130135] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [48577.130186] printk: Suspending console(s) (use no_console_suspend to debug) [48577.736567] ACPI: EC: interrupt blocked [48577.765426] ACPI: PM: Preparing to enter system sleep state S3 [48577.777008] ACPI: EC: event blocked [48577.777013] ACPI: EC: EC stopped [48577.777014] ACPI: PM: Saving platform NVS memory [48577.780345] Disabling non-boot CPUs ... [48577.782362] smpboot: CPU 3 is now offline [48577.788285] smpboot: CPU 2 is now offline [48577.791766] smpboot: CPU 1 is now offline [48577.801048] ACPI: PM: Low-level resume complete [48577.801092] ACPI: EC: EC started [48577.801093] ACPI: PM: Restoring platform NVS memory [48577.802972] Enabling non-boot CPUs ... [48577.803003] smpboot: Booting Node 0 Processor 1 APIC 0x2 [48577.803707] CPU1 is up [48577.803725] smpboot: Booting Node 0 Processor 2 APIC 0x1 [48577.804485] CPU2 is up [48577.804501] smpboot: Booting Node 0 Processor 3 APIC 0x3 [48577.805200] CPU3 is up [48577.808036] ACPI: PM: Waking up from system sleep state S3 [48577.837273] ACPI: EC: interrupt unblocked [48577.872060] ACPI: EC: event unblocked [48577.884763] nvme nvme0: 4/0/0 default/read/poll queues [48578.110215] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [48578.122240] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [48578.378231] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [48578.634223] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [48578.837156] OOM killer enabled. [48578.837160] Restarting tasks ... done. [48578.838538] random: crng reseeded on system resumption [48578.975919] PM: suspend exit [48579.050099] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [48579.050116] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [48579.330244] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [48579.409721] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [48579.431945] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [48591.865499] wlp58s0: authenticate with dc:15:c8:46:1c:4b (local address=9c:b6:d0:d1:6a:b1) [48591.865517] wlp58s0: send auth to dc:15:c8:46:1c:4b (try 1/3) [48591.871593] wlp58s0: authenticated [48591.874166] wlp58s0: associate with dc:15:c8:46:1c:4b (try 1/3) [48591.879179] wlp58s0: RX AssocResp from dc:15:c8:46:1c:4b (capab=0x1511 status=0 aid=5) [48591.882055] wlp58s0: associated [48591.950690] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by dc:15:c8:46:1c:4b [50012.844006] wlp58s0: deauthenticating from dc:15:c8:46:1c:4b by local choice (Reason: 3=DEAUTH_LEAVING) [50016.010853] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer dc:15:c8:46:1c:4b: -110 [50016.010878] wlp58s0: failed to remove key (0, dc:15:c8:46:1c:4b) from hardware (-110) [50016.636100] PM: suspend entry (deep) [50016.645333] Filesystems sync: 0.009 seconds [50016.660570] Freezing user space processes [50016.663087] Freezing user space processes completed (elapsed 0.002 seconds) [50016.663098] OOM killer disabled. [50016.663101] Freezing remaining freezable tasks [50016.665122] Freezing remaining freezable tasks completed (elapsed 0.002 seconds) [50016.665240] printk: Suspending console(s) (use no_console_suspend to debug) [50017.261440] ACPI: EC: interrupt blocked [50017.290056] ACPI: PM: Preparing to enter system sleep state S3 [50017.300113] ACPI: EC: event blocked [50017.300118] ACPI: EC: EC stopped [50017.300120] ACPI: PM: Saving platform NVS memory [50017.303346] Disabling non-boot CPUs ... [50017.305376] smpboot: CPU 3 is now offline [50017.310560] smpboot: CPU 2 is now offline [50017.313283] smpboot: CPU 1 is now offline [50017.321490] ACPI: PM: Low-level resume complete [50017.321534] ACPI: EC: EC started [50017.321535] ACPI: PM: Restoring platform NVS memory [50017.323455] Enabling non-boot CPUs ... [50017.323486] smpboot: Booting Node 0 Processor 1 APIC 0x2 [50017.324200] CPU1 is up [50017.324216] smpboot: Booting Node 0 Processor 2 APIC 0x1 [50017.324994] CPU2 is up [50017.325009] smpboot: Booting Node 0 Processor 3 APIC 0x3 [50017.325709] CPU3 is up [50017.328535] ACPI: PM: Waking up from system sleep state S3 [50017.362506] ACPI: EC: interrupt unblocked [50017.378802] ACPI: EC: event unblocked [50017.391435] nvme nvme0: 4/0/0 default/read/poll queues [50017.612768] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [50017.628862] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [50017.888793] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [50018.144833] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [50018.347879] OOM killer enabled. [50018.347882] Restarting tasks ... done. [50018.351414] random: crng reseeded on system resumption [50018.479263] PM: suspend exit [50018.550609] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [50018.550615] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [50018.855498] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [50018.913536] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [50018.938518] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [50024.433324] wlp58s0: authenticate with dc:15:c8:46:1c:4b (local address=9c:b6:d0:d1:6a:b1) [50024.433342] wlp58s0: send auth to dc:15:c8:46:1c:4b (try 1/3) [50024.439650] wlp58s0: authenticated [50024.440844] wlp58s0: associate with dc:15:c8:46:1c:4b (try 1/3) [50024.451618] wlp58s0: RX AssocResp from dc:15:c8:46:1c:4b (capab=0x1511 status=0 aid=5) [50024.454802] wlp58s0: associated [50024.545357] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by dc:15:c8:46:1c:4b [50402.589238] wlp58s0: deauthenticating from dc:15:c8:46:1c:4b by local choice (Reason: 3=DEAUTH_LEAVING) [50404.206734] PM: suspend entry (deep) [50404.232600] Filesystems sync: 0.025 seconds [50404.241058] Freezing user space processes [50404.243358] Freezing user space processes completed (elapsed 0.002 seconds) [50404.243370] OOM killer disabled. [50404.243373] Freezing remaining freezable tasks [50404.245431] Freezing remaining freezable tasks completed (elapsed 0.002 seconds) [50404.245543] printk: Suspending console(s) (use no_console_suspend to debug) [50404.835662] ACPI: EC: interrupt blocked [50404.861357] ACPI: PM: Preparing to enter system sleep state S3 [50404.871582] ACPI: EC: event blocked [50404.871586] ACPI: EC: EC stopped [50404.871589] ACPI: PM: Saving platform NVS memory [50404.874888] Disabling non-boot CPUs ... [50404.876927] smpboot: CPU 3 is now offline [50404.880993] smpboot: CPU 2 is now offline [50404.883516] smpboot: CPU 1 is now offline [50404.890953] ACPI: PM: Low-level resume complete [50404.890997] ACPI: EC: EC started [50404.890998] ACPI: PM: Restoring platform NVS memory [50404.892916] Enabling non-boot CPUs ... [50404.892946] smpboot: Booting Node 0 Processor 1 APIC 0x2 [50404.893658] CPU1 is up [50404.893675] smpboot: Booting Node 0 Processor 2 APIC 0x1 [50404.894420] CPU2 is up [50404.894437] smpboot: Booting Node 0 Processor 3 APIC 0x3 [50404.895140] CPU3 is up [50404.898016] ACPI: PM: Waking up from system sleep state S3 [50404.930391] ACPI: EC: interrupt unblocked [50404.944347] ACPI: EC: event unblocked [50404.956536] nvme nvme0: 4/0/0 default/read/poll queues [50405.181014] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [50405.193005] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [50405.351423] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [50405.449064] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [50405.705037] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [50405.849015] OOM killer enabled. [50405.849018] Restarting tasks ... done. [50405.850743] random: crng reseeded on system resumption [50405.965959] PM: suspend exit [50406.052345] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [50406.052361] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [50406.407148] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [50406.424722] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [50406.434398] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [50411.879336] wlp58s0: authenticate with dc:15:c8:46:1c:4b (local address=9c:b6:d0:d1:6a:b1) [50411.879343] wlp58s0: send auth to dc:15:c8:46:1c:4b (try 1/3) [50411.886483] wlp58s0: authenticated [50411.888983] wlp58s0: associate with dc:15:c8:46:1c:4b (try 1/3) [50411.898783] wlp58s0: RX AssocResp from dc:15:c8:46:1c:4b (capab=0x1511 status=0 aid=5) [50411.901567] wlp58s0: associated [50411.965155] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by dc:15:c8:46:1c:4b [51308.038697] wlp58s0: deauthenticating from dc:15:c8:46:1c:4b by local choice (Reason: 3=DEAUTH_LEAVING) [51311.376519] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer dc:15:c8:46:1c:4b: -110 [51311.376544] wlp58s0: failed to remove key (0, dc:15:c8:46:1c:4b) from hardware (-110) [51311.994386] PM: suspend entry (deep) [51312.019620] Filesystems sync: 0.025 seconds [51312.022694] Freezing user space processes [51312.024483] Freezing user space processes completed (elapsed 0.001 seconds) [51312.024486] OOM killer disabled. [51312.024487] Freezing remaining freezable tasks [51312.026088] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [51312.026142] printk: Suspending console(s) (use no_console_suspend to debug) [51312.623022] ACPI: EC: interrupt blocked [51312.651887] ACPI: PM: Preparing to enter system sleep state S3 [51312.662074] ACPI: EC: event blocked [51312.662079] ACPI: EC: EC stopped [51312.662081] ACPI: PM: Saving platform NVS memory [51312.665316] Disabling non-boot CPUs ... [51312.668665] smpboot: CPU 3 is now offline [51312.674179] smpboot: CPU 2 is now offline [51312.678656] smpboot: CPU 1 is now offline [51312.683951] ACPI: PM: Low-level resume complete [51312.683995] ACPI: EC: EC started [51312.683996] ACPI: PM: Restoring platform NVS memory [51312.685892] Enabling non-boot CPUs ... [51312.685923] smpboot: Booting Node 0 Processor 1 APIC 0x2 [51312.686975] CPU1 is up [51312.686993] smpboot: Booting Node 0 Processor 2 APIC 0x1 [51312.687743] CPU2 is up [51312.687760] smpboot: Booting Node 0 Processor 3 APIC 0x3 [51312.688463] CPU3 is up [51312.691294] ACPI: PM: Waking up from system sleep state S3 [51312.728643] ACPI: EC: interrupt unblocked [51312.744099] ACPI: EC: event unblocked [51312.756446] nvme nvme0: 4/0/0 default/read/poll queues [51312.978456] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [51312.998463] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [51313.143378] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [51313.258439] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [51313.514480] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [51313.716763] OOM killer enabled. [51313.716767] Restarting tasks ... done. [51313.718776] random: crng reseeded on system resumption [51313.855925] PM: suspend exit [51313.921029] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [51313.921044] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [51314.214052] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [51314.281278] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [51314.305263] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [51319.756917] wlp58s0: authenticate with dc:15:c8:46:1c:4b (local address=9c:b6:d0:d1:6a:b1) [51319.756923] wlp58s0: send auth to dc:15:c8:46:1c:4b (try 1/3) [51319.762455] wlp58s0: authenticated [51319.770425] wlp58s0: associate with dc:15:c8:46:1c:4b (try 1/3) [51319.775071] wlp58s0: RX AssocResp from dc:15:c8:46:1c:4b (capab=0x1511 status=0 aid=5) [51319.777639] wlp58s0: associated [51319.855666] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by dc:15:c8:46:1c:4b [52764.930624] audit: type=1400 audit(1742592751.247:349): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/etc/paperspecs" pid=299896 comm="paperconf" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0 [53995.882860] audit: type=1400 audit(1742593986.180:350): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/etc/paperspecs" pid=301266 comm="paperconf" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0 [53996.746862] audit: type=1400 audit(1742593987.044:351): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/profiles.ini" pid=301254 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [53996.758678] audit: type=1400 audit(1742593987.056:352): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/cert9.db" pid=301254 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=5272 ouid=5272 [53996.759215] audit: type=1400 audit(1742593987.056:353): apparmor="ALLOWED" operation="file_lock" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/cert9.db" pid=301254 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=5272 ouid=5272 [53996.760172] audit: type=1400 audit(1742593987.060:354): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/key4.db" pid=301254 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=5272 ouid=5272 [53996.760177] audit: type=1400 audit(1742593987.060:355): apparmor="ALLOWED" operation="file_lock" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/key4.db" pid=301254 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=5272 ouid=5272 [54069.059999] wlp58s0: deauthenticating from dc:15:c8:46:1c:4b by local choice (Reason: 3=DEAUTH_LEAVING) [54072.327772] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer dc:15:c8:46:1c:4b: -110 [54072.327795] wlp58s0: failed to remove key (0, dc:15:c8:46:1c:4b) from hardware (-110) [54072.937475] PM: suspend entry (deep) [54072.964072] Filesystems sync: 0.026 seconds [54072.973221] Freezing user space processes [54072.976176] Freezing user space processes completed (elapsed 0.002 seconds) [54072.976188] OOM killer disabled. [54072.976191] Freezing remaining freezable tasks [54072.978291] Freezing remaining freezable tasks completed (elapsed 0.002 seconds) [54072.978411] printk: Suspending console(s) (use no_console_suspend to debug) [54073.578746] ACPI: EC: interrupt blocked [54073.607276] ACPI: PM: Preparing to enter system sleep state S3 [54073.621931] ACPI: EC: event blocked [54073.621936] ACPI: EC: EC stopped [54073.621938] ACPI: PM: Saving platform NVS memory [54073.625369] Disabling non-boot CPUs ... [54073.628763] smpboot: CPU 3 is now offline [54073.633590] smpboot: CPU 2 is now offline [54073.636259] smpboot: CPU 1 is now offline [54073.644760] ACPI: PM: Low-level resume complete [54073.644806] ACPI: EC: EC started [54073.644807] ACPI: PM: Restoring platform NVS memory [54073.646686] Enabling non-boot CPUs ... [54073.646718] smpboot: Booting Node 0 Processor 1 APIC 0x2 [54073.647622] CPU1 is up [54073.647640] smpboot: Booting Node 0 Processor 2 APIC 0x1 [54073.648384] CPU2 is up [54073.648401] smpboot: Booting Node 0 Processor 3 APIC 0x3 [54073.649097] CPU3 is up [54073.651922] ACPI: PM: Waking up from system sleep state S3 [54073.692346] ACPI: EC: interrupt unblocked [54073.709821] ACPI: EC: event unblocked [54073.722584] nvme nvme0: 4/0/0 default/read/poll queues [54073.963704] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [54073.971613] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [54074.148809] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [54074.219659] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [54074.479636] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [54074.625446] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [54074.625455] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [54074.625980] OOM killer enabled. [54074.625984] Restarting tasks ... done. [54074.631135] random: crng reseeded on system resumption [54074.839237] PM: suspend exit [54074.983094] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [54075.015400] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [54075.168672] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [54080.622109] wlp58s0: authenticate with f4:db:e6:bb:53:0f (local address=9c:b6:d0:d1:6a:b1) [54080.622120] wlp58s0: send auth to f4:db:e6:bb:53:0f (try 1/3) [54080.623064] wlp58s0: authenticated [54080.623586] wlp58s0: associate with f4:db:e6:bb:53:0f (try 1/3) [54080.633062] wlp58s0: RX AssocResp from f4:db:e6:bb:53:0f (capab=0x1101 status=0 aid=2) [54080.635746] wlp58s0: associated [54080.681129] wlp58s0: Limiting TX power to 13 dBm as advertised by f4:db:e6:bb:53:0f [54117.744717] wlp58s0: disconnect from AP f4:db:e6:bb:53:0f for new auth to f4:db:e6:bb:4d:60 [54117.867795] wlp58s0: authenticate with f4:db:e6:bb:4d:60 (local address=9c:b6:d0:d1:6a:b1) [54117.867803] wlp58s0: send auth to f4:db:e6:bb:4d:60 (try 1/3) [54117.869500] wlp58s0: authenticated [54117.871494] wlp58s0: associate with f4:db:e6:bb:4d:60 (try 1/3) [54117.881205] wlp58s0: RX ReassocResp from f4:db:e6:bb:4d:60 (capab=0x1401 status=0 aid=7) [54117.884804] wlp58s0: associated [54118.830680] wlp58s0: Limiting TX power to 5 dBm as advertised by f4:db:e6:bb:4d:60 [54155.030225] wlp58s0: disconnect from AP f4:db:e6:bb:4d:60 for new auth to f4:db:e6:bb:50:40 [54155.140043] wlp58s0: authenticate with f4:db:e6:bb:50:40 (local address=9c:b6:d0:d1:6a:b1) [54155.140048] wlp58s0: send auth to f4:db:e6:bb:50:40 (try 1/3) [54155.141482] wlp58s0: authenticated [54155.143150] wlp58s0: associate with f4:db:e6:bb:50:40 (try 1/3) [54155.153872] wlp58s0: RX ReassocResp from f4:db:e6:bb:50:40 (capab=0x1401 status=0 aid=1) [54155.156540] wlp58s0: associated [54156.595300] wlp58s0: Limiting TX power to 5 dBm as advertised by f4:db:e6:bb:50:40 [54189.839067] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [54189.847264] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [54194.760465] wlp58s0: authenticate with f4:db:e6:bb:4d:6f (local address=9c:b6:d0:d1:6a:b1) [54194.760478] wlp58s0: send auth to f4:db:e6:bb:4d:6f (try 1/3) [54194.761459] wlp58s0: authenticated [54194.767017] wlp58s0: associate with f4:db:e6:bb:4d:6f (try 1/3) [54194.775183] wlp58s0: RX AssocResp from f4:db:e6:bb:4d:6f (capab=0x1101 status=0 aid=7) [54194.778664] wlp58s0: associated [54194.858556] wlp58s0: Limiting TX power to 13 dBm as advertised by f4:db:e6:bb:4d:6f [54268.686168] wlp58s0: disconnect from AP f4:db:e6:bb:4d:6f for new auth to f4:db:e6:bb:53:0f [54268.795108] wlp58s0: authenticate with f4:db:e6:bb:53:0f (local address=9c:b6:d0:d1:6a:b1) [54268.795127] wlp58s0: send auth to f4:db:e6:bb:53:0f (try 1/3) [54268.796333] wlp58s0: send auth to f4:db:e6:bb:53:0f (try 2/3) [54268.798180] wlp58s0: send auth to f4:db:e6:bb:53:0f (try 3/3) [54268.799320] wlp58s0: authentication with f4:db:e6:bb:53:0f timed out [54269.904562] wlp58s0: authenticate with f4:db:e6:bb:4d:8f (local address=9c:b6:d0:d1:6a:b1) [54269.904580] wlp58s0: send auth to f4:db:e6:bb:4d:8f (try 1/3) [54269.905660] wlp58s0: authenticated [54269.910559] wlp58s0: associate with f4:db:e6:bb:4d:8f (try 1/3) [54269.920103] wlp58s0: RX AssocResp from f4:db:e6:bb:4d:8f (capab=0x1101 status=0 aid=2) [54269.923189] wlp58s0: associated [54270.090076] wlp58s0: Limiting TX power to 13 dBm as advertised by f4:db:e6:bb:4d:8f [54284.814716] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [54284.821970] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [54285.448116] wlp58s0: authenticate with f4:db:e6:bb:4d:6f (local address=9c:b6:d0:d1:6a:b1) [54285.448124] wlp58s0: send auth to f4:db:e6:bb:4d:6f (try 1/3) [54285.449440] wlp58s0: send auth to f4:db:e6:bb:4d:6f (try 2/3) [54285.450505] wlp58s0: send auth to f4:db:e6:bb:4d:6f (try 3/3) [54285.451596] wlp58s0: authentication with f4:db:e6:bb:4d:6f timed out [54286.516035] wlp58s0: authenticate with f4:db:e6:bb:4e:cf (local address=9c:b6:d0:d1:6a:b1) [54286.516046] wlp58s0: send auth to f4:db:e6:bb:4e:cf (try 1/3) [54286.517175] wlp58s0: send auth to f4:db:e6:bb:4e:cf (try 2/3) [54286.518458] wlp58s0: send auth to f4:db:e6:bb:4e:cf (try 3/3) [54286.519582] wlp58s0: authentication with f4:db:e6:bb:4e:cf timed out [54287.771781] wlp58s0: authenticate with f4:db:e6:c8:4f:2f (local address=9c:b6:d0:d1:6a:b1) [54287.771790] wlp58s0: send auth to f4:db:e6:c8:4f:2f (try 1/3) [54287.772978] wlp58s0: send auth to f4:db:e6:c8:4f:2f (try 2/3) [54287.774103] wlp58s0: send auth to f4:db:e6:c8:4f:2f (try 3/3) [54287.775237] wlp58s0: authentication with f4:db:e6:c8:4f:2f timed out [54342.235318] wlp58s0: authenticate with 04:f0:21:64:db:8c (local address=9c:b6:d0:d1:6a:b1) [54342.235333] wlp58s0: send auth to 04:f0:21:64:db:8c (try 1/3) [54342.240299] wlp58s0: send auth to 04:f0:21:64:db:8c (try 2/3) [54342.246059] wlp58s0: send auth to 04:f0:21:64:db:8c (try 3/3) [54342.251390] wlp58s0: authentication with 04:f0:21:64:db:8c timed out [54550.285192] PM: suspend entry (deep) [54550.309693] Filesystems sync: 0.024 seconds [54550.312528] Freezing user space processes [54550.314428] Freezing user space processes completed (elapsed 0.001 seconds) [54550.314432] OOM killer disabled. [54550.314433] Freezing remaining freezable tasks [54550.316039] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [54550.316091] printk: Suspending console(s) (use no_console_suspend to debug) [54550.904027] ACPI: EC: interrupt blocked [54550.932950] ACPI: PM: Preparing to enter system sleep state S3 [54550.944875] ACPI: EC: event blocked [54550.944881] ACPI: EC: EC stopped [54550.944882] ACPI: PM: Saving platform NVS memory [54550.948174] Disabling non-boot CPUs ... [54550.951238] smpboot: CPU 3 is now offline [54550.955145] smpboot: CPU 2 is now offline [54550.957680] smpboot: CPU 1 is now offline [54550.964049] ACPI: PM: Low-level resume complete [54550.964094] ACPI: EC: EC started [54550.964095] ACPI: PM: Restoring platform NVS memory [54550.966011] Enabling non-boot CPUs ... [54550.966037] smpboot: Booting Node 0 Processor 1 APIC 0x2 [54550.966756] CPU1 is up [54550.966770] smpboot: Booting Node 0 Processor 2 APIC 0x1 [54550.967542] CPU2 is up [54550.967558] smpboot: Booting Node 0 Processor 3 APIC 0x3 [54550.968251] CPU3 is up [54550.971069] ACPI: PM: Waking up from system sleep state S3 [54550.998406] ACPI: EC: interrupt unblocked [54551.061565] ACPI: EC: event unblocked [54551.075478] nvme nvme0: 4/0/0 default/read/poll queues [54551.311462] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [54551.319475] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [54551.482260] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [54551.575466] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [54551.831524] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [54551.972097] OOM killer enabled. [54551.972108] Restarting tasks ... done. [54551.975500] random: crng reseeded on system resumption [54552.114726] PM: suspend exit [54552.174150] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [54552.174164] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [54552.500947] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [54552.534843] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [54552.557189] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [54557.617946] wlp58s0: authenticate with 6c:31:0e:b5:f4:af (local address=9c:b6:d0:d1:6a:b1) [54557.617991] wlp58s0: send auth to 6c:31:0e:b5:f4:af (try 1/3) [54557.619039] wlp58s0: authenticated [54557.619440] wlp58s0: associate with 6c:31:0e:b5:f4:af (try 1/3) [54557.635555] wlp58s0: RX AssocResp from 6c:31:0e:b5:f4:af (capab=0x1101 status=0 aid=3) [54557.638901] wlp58s0: associated [54557.698372] wlp58s0: Limiting TX power to 13 dBm as advertised by 6c:31:0e:b5:f4:af [55034.817761] wlp58s0: deauthenticating from 6c:31:0e:b5:f4:af by local choice (Reason: 3=DEAUTH_LEAVING) [55041.218140] PM: suspend entry (deep) [55041.245570] Filesystems sync: 0.027 seconds [55041.248302] Freezing user space processes [55041.250266] Freezing user space processes completed (elapsed 0.001 seconds) [55041.250270] OOM killer disabled. [55041.250271] Freezing remaining freezable tasks [55041.251927] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [55041.251981] printk: Suspending console(s) (use no_console_suspend to debug) [55041.848378] ACPI: EC: interrupt blocked [55041.876314] ACPI: PM: Preparing to enter system sleep state S3 [55041.897072] ACPI: EC: event blocked [55041.897077] ACPI: EC: EC stopped [55041.897089] ACPI: PM: Saving platform NVS memory [55041.900412] Disabling non-boot CPUs ... [55041.902427] smpboot: CPU 3 is now offline [55041.906818] smpboot: CPU 2 is now offline [55041.910435] smpboot: CPU 1 is now offline [55041.917803] ACPI: PM: Low-level resume complete [55041.917848] ACPI: EC: EC started [55041.917848] ACPI: PM: Restoring platform NVS memory [55041.919746] Enabling non-boot CPUs ... [55041.919772] smpboot: Booting Node 0 Processor 1 APIC 0x2 [55041.920486] CPU1 is up [55041.920500] smpboot: Booting Node 0 Processor 2 APIC 0x1 [55041.921248] CPU2 is up [55041.921265] smpboot: Booting Node 0 Processor 3 APIC 0x3 [55041.921970] CPU3 is up [55041.924786] ACPI: PM: Waking up from system sleep state S3 [55041.951751] ACPI: EC: interrupt unblocked [55041.986481] ACPI: EC: event unblocked [55041.998265] nvme nvme0: 4/0/0 default/read/poll queues [55042.225388] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [55042.237397] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [55042.390906] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [55042.493407] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [55042.749419] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [55042.954673] OOM killer enabled. [55042.954677] Restarting tasks ... done. [55042.956877] random: crng reseeded on system resumption [55043.077332] PM: suspend exit [55043.163151] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [55043.163167] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [55043.451036] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [55043.521605] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [55043.547182] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [55059.086837] wlp58s0: authenticate with 70:f0:96:8e:a3:2b (local address=9c:b6:d0:d1:6a:b1) [55059.086843] wlp58s0: send auth to 70:f0:96:8e:a3:2b (try 1/3) [55059.088398] wlp58s0: authenticated [55059.089276] wlp58s0: associate with 70:f0:96:8e:a3:2b (try 1/3) [55059.093067] wlp58s0: RX AssocResp from 70:f0:96:8e:a3:2b (capab=0x1111 status=0 aid=11) [55059.095610] wlp58s0: associated [55059.167489] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:f0:96:8e:a3:2b [55184.847790] wlp58s0: deauthenticating from 70:f0:96:8e:a3:2b by local choice (Reason: 3=DEAUTH_LEAVING) [55186.523426] PM: suspend entry (deep) [55186.542201] Filesystems sync: 0.018 seconds [55186.545054] Freezing user space processes [55186.546985] Freezing user space processes completed (elapsed 0.001 seconds) [55186.546988] OOM killer disabled. [55186.546989] Freezing remaining freezable tasks [55186.548611] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [55186.548671] printk: Suspending console(s) (use no_console_suspend to debug) [55187.151669] ACPI: EC: interrupt blocked [55187.178770] ACPI: PM: Preparing to enter system sleep state S3 [55187.188960] ACPI: EC: event blocked [55187.188965] ACPI: EC: EC stopped [55187.188967] ACPI: PM: Saving platform NVS memory [55187.192274] Disabling non-boot CPUs ... [55187.194301] smpboot: CPU 3 is now offline [55187.198496] smpboot: CPU 2 is now offline [55187.201466] smpboot: CPU 1 is now offline [55187.210079] ACPI: PM: Low-level resume complete [55187.210123] ACPI: EC: EC started [55187.210123] ACPI: PM: Restoring platform NVS memory [55187.212022] Enabling non-boot CPUs ... [55187.212047] smpboot: Booting Node 0 Processor 1 APIC 0x2 [55187.212775] CPU1 is up [55187.212793] smpboot: Booting Node 0 Processor 2 APIC 0x1 [55187.213609] CPU2 is up [55187.213626] smpboot: Booting Node 0 Processor 3 APIC 0x3 [55187.214342] CPU3 is up [55187.217177] ACPI: PM: Waking up from system sleep state S3 [55187.243941] ACPI: EC: interrupt unblocked [55187.294855] ACPI: EC: event unblocked [55187.308889] nvme nvme0: 4/0/0 default/read/poll queues [55187.544932] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [55187.549009] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [55187.709999] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [55187.805000] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [55188.060943] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [55188.262997] OOM killer enabled. [55188.263000] Restarting tasks ... done. [55188.264672] random: crng reseeded on system resumption [55188.414982] PM: suspend exit [55188.471349] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [55188.471366] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [55188.743629] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [55188.830426] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [55188.854683] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [55194.408909] wlp58s0: authenticate with 54:8a:ba:27:d8:a3 (local address=9c:b6:d0:d1:6a:b1) [55194.408916] wlp58s0: send auth to 54:8a:ba:27:d8:a3 (try 1/3) [55194.410746] wlp58s0: authenticated [55194.412933] wlp58s0: associate with 54:8a:ba:27:d8:a3 (try 1/3) [55194.419867] wlp58s0: RX AssocResp from 54:8a:ba:27:d8:a3 (capab=0x1111 status=0 aid=13) [55194.422341] wlp58s0: associated [55194.460402] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d8:a3 [57190.370266] wlp58s0: deauthenticating from 54:8a:ba:27:d8:a3 by local choice (Reason: 3=DEAUTH_LEAVING) [57193.492145] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 54:8a:ba:27:d8:a3: -110 [57193.492170] wlp58s0: failed to remove key (0, 54:8a:ba:27:d8:a3) from hardware (-110) [57194.140163] PM: suspend entry (deep) [57194.164225] Filesystems sync: 0.024 seconds [57194.167622] Freezing user space processes [57194.169607] Freezing user space processes completed (elapsed 0.001 seconds) [57194.169611] OOM killer disabled. [57194.169613] Freezing remaining freezable tasks [57194.171264] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [57194.171319] printk: Suspending console(s) (use no_console_suspend to debug) [57194.786791] ACPI: EC: interrupt blocked [57194.816134] ACPI: PM: Preparing to enter system sleep state S3 [57194.826288] ACPI: EC: event blocked [57194.826292] ACPI: EC: EC stopped [57194.826294] ACPI: PM: Saving platform NVS memory [57194.829706] Disabling non-boot CPUs ... [57194.831840] smpboot: CPU 3 is now offline [57194.835262] smpboot: CPU 2 is now offline [57194.842132] smpboot: CPU 1 is now offline [57194.850141] ACPI: PM: Low-level resume complete [57194.850184] ACPI: EC: EC started [57194.850185] ACPI: PM: Restoring platform NVS memory [57194.852082] Enabling non-boot CPUs ... [57194.852114] smpboot: Booting Node 0 Processor 1 APIC 0x2 [57194.852832] CPU1 is up [57194.852848] smpboot: Booting Node 0 Processor 2 APIC 0x1 [57194.853614] CPU2 is up [57194.853631] smpboot: Booting Node 0 Processor 3 APIC 0x3 [57194.854335] CPU3 is up [57194.857182] ACPI: PM: Waking up from system sleep state S3 [57194.887906] ACPI: EC: interrupt unblocked [57194.904581] ACPI: EC: event unblocked [57194.916799] nvme nvme0: 4/0/0 default/read/poll queues [57195.140134] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [57195.156112] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [57195.303927] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [57195.412157] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [57195.668191] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [57195.807947] OOM killer enabled. [57195.807951] Restarting tasks ... done. [57195.810711] random: crng reseeded on system resumption [57195.912814] PM: suspend exit [57196.011596] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [57196.011611] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [57196.368799] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [57196.396064] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [57196.400857] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [57201.861558] wlp58s0: authenticate with 10:a8:29:70:82:4b (local address=9c:b6:d0:d1:6a:b1) [57201.861570] wlp58s0: send auth to 10:a8:29:70:82:4b (try 1/3) [57201.864591] wlp58s0: authenticated [57201.868217] wlp58s0: associate with 10:a8:29:70:82:4b (try 1/3) [57201.876499] wlp58s0: RX AssocResp from 10:a8:29:70:82:4b (capab=0x1111 status=0 aid=32) [57201.879409] wlp58s0: associated [57201.922978] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 10:a8:29:70:82:4b [59066.567966] wlp58s0: disconnect from AP 10:a8:29:70:82:4b for new auth to 70:f0:96:8b:bb:e4 [59069.711467] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 10:a8:29:70:82:4b: -110 [59069.711478] wlp58s0: failed to remove key (0, 10:a8:29:70:82:4b) from hardware (-110) [59069.752783] wlp58s0: authenticate with 70:f0:96:8b:bb:e4 (local address=9c:b6:d0:d1:6a:b1) [59069.752799] wlp58s0: send auth to 70:f0:96:8b:bb:e4 (try 1/3) [59069.757185] wlp58s0: authenticated [59069.763300] wlp58s0: associate with 70:f0:96:8b:bb:e4 (try 1/3) [59069.768320] wlp58s0: RX ReassocResp from 70:f0:96:8b:bb:e4 (capab=0x1111 status=0 aid=15) [59069.772422] wlp58s0: associated [59069.841770] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 70:f0:96:8b:bb:e4 [59102.767420] wlp58s0: disconnect from AP 70:f0:96:8b:bb:e4 for new auth to 10:a8:29:70:82:4b [59102.851284] wlp58s0: authenticate with 10:a8:29:70:82:4b (local address=9c:b6:d0:d1:6a:b1) [59102.851299] wlp58s0: send auth to 10:a8:29:70:82:4b (try 1/3) [59102.856432] wlp58s0: authenticated [59102.858823] wlp58s0: associate with 10:a8:29:70:82:4b (try 1/3) [59102.866005] wlp58s0: RX ReassocResp from 10:a8:29:70:82:4b (capab=0x1111 status=0 aid=18) [59102.869211] wlp58s0: associated [59102.884845] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 10:a8:29:70:82:4b [59127.531062] wlp58s0: disconnect from AP 10:a8:29:70:82:4b for new auth to 70:f0:96:8b:bb:e4 [59127.609385] wlp58s0: authenticate with 70:f0:96:8b:bb:e4 (local address=9c:b6:d0:d1:6a:b1) [59127.609400] wlp58s0: send auth to 70:f0:96:8b:bb:e4 (try 1/3) [59127.613242] wlp58s0: authenticated [59127.618446] wlp58s0: associate with 70:f0:96:8b:bb:e4 (try 1/3) [59127.622414] wlp58s0: RX ReassocResp from 70:f0:96:8b:bb:e4 (capab=0x1111 status=0 aid=31) [59127.627460] wlp58s0: associated [59127.699324] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 70:f0:96:8b:bb:e4 [59166.595208] wlp58s0: deauthenticating from 70:f0:96:8b:bb:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [59168.266519] PM: suspend entry (deep) [59168.302346] Filesystems sync: 0.035 seconds [59168.306813] Freezing user space processes [59168.308716] Freezing user space processes completed (elapsed 0.001 seconds) [59168.308720] OOM killer disabled. [59168.308720] Freezing remaining freezable tasks [59168.310229] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [59168.310280] printk: Suspending console(s) (use no_console_suspend to debug) [59168.884946] ACPI: EC: interrupt blocked [59168.914011] ACPI: PM: Preparing to enter system sleep state S3 [59168.924305] ACPI: EC: event blocked [59168.924309] ACPI: EC: EC stopped [59168.924311] ACPI: PM: Saving platform NVS memory [59168.927738] Disabling non-boot CPUs ... [59168.929880] smpboot: CPU 3 is now offline [59168.934657] smpboot: CPU 2 is now offline [59168.937483] smpboot: CPU 1 is now offline [59168.944884] ACPI: PM: Low-level resume complete [59168.944929] ACPI: EC: EC started [59168.944929] ACPI: PM: Restoring platform NVS memory [59168.946827] Enabling non-boot CPUs ... [59168.946853] smpboot: Booting Node 0 Processor 1 APIC 0x2 [59168.947572] CPU1 is up [59168.947587] smpboot: Booting Node 0 Processor 2 APIC 0x1 [59168.948355] CPU2 is up [59168.948371] smpboot: Booting Node 0 Processor 3 APIC 0x3 [59168.949075] CPU3 is up [59168.951909] ACPI: PM: Waking up from system sleep state S3 [59168.982519] ACPI: EC: interrupt unblocked [59169.035816] ACPI: EC: event unblocked [59169.049086] nvme nvme0: 4/0/0 default/read/poll queues [59169.278149] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [59169.286126] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [59169.542136] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [59169.798190] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [59169.938166] OOM killer enabled. [59169.938171] Restarting tasks ... done. [59169.940367] random: crng reseeded on system resumption [59170.065417] PM: suspend exit [59170.141113] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [59170.141119] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [59170.475756] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [59170.501175] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [59170.523877] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [59175.673607] wlp58s0: authenticate with e4:37:9f:33:9d:8b (local address=9c:b6:d0:d1:6a:b1) [59175.673616] wlp58s0: send auth to e4:37:9f:33:9d:8b (try 1/3) [59175.675670] wlp58s0: authenticated [59175.678016] wlp58s0: associate with e4:37:9f:33:9d:8b (try 1/3) [59175.685828] wlp58s0: RX AssocResp from e4:37:9f:33:9d:8b (capab=0x1111 status=0 aid=18) [59175.688678] wlp58s0: associated [59175.707429] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:37:9f:33:9d:8b [60160.978016] wlp58s0: deauthenticating from e4:37:9f:33:9d:8b by local choice (Reason: 3=DEAUTH_LEAVING) [60164.109766] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer e4:37:9f:33:9d:8b: -110 [60164.109798] wlp58s0: failed to remove key (0, e4:37:9f:33:9d:8b) from hardware (-110) [60164.709022] PM: suspend entry (deep) [60164.717983] Filesystems sync: 0.008 seconds [60164.720802] Freezing user space processes [60164.722772] Freezing user space processes completed (elapsed 0.001 seconds) [60164.722776] OOM killer disabled. [60164.722777] Freezing remaining freezable tasks [60164.724393] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [60164.724444] printk: Suspending console(s) (use no_console_suspend to debug) [60165.356371] ACPI: EC: interrupt blocked [60165.384435] ACPI: PM: Preparing to enter system sleep state S3 [60165.394513] ACPI: EC: event blocked [60165.394518] ACPI: EC: EC stopped [60165.394520] ACPI: PM: Saving platform NVS memory [60165.397892] Disabling non-boot CPUs ... [60165.401237] smpboot: CPU 3 is now offline [60165.405292] smpboot: CPU 2 is now offline [60165.409584] smpboot: CPU 1 is now offline [60165.418593] ACPI: PM: Low-level resume complete [60165.418637] ACPI: EC: EC started [60165.418638] ACPI: PM: Restoring platform NVS memory [60165.420543] Enabling non-boot CPUs ... [60165.420567] smpboot: Booting Node 0 Processor 1 APIC 0x2 [60165.421288] CPU1 is up [60165.421304] smpboot: Booting Node 0 Processor 2 APIC 0x1 [60165.422082] CPU2 is up [60165.422098] smpboot: Booting Node 0 Processor 3 APIC 0x3 [60165.422808] CPU3 is up [60165.425621] ACPI: PM: Waking up from system sleep state S3 [60165.456034] ACPI: EC: interrupt unblocked [60165.473217] ACPI: EC: event unblocked [60165.484239] nvme nvme0: 4/0/0 default/read/poll queues [60165.705780] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [60165.725754] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [60165.876424] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [60165.981805] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [60166.237829] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [60166.381679] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [60166.381687] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [60166.382672] OOM killer enabled. [60166.382676] Restarting tasks ... done. [60166.387597] random: crng reseeded on system resumption [60166.493316] PM: suspend exit [60166.742010] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [60166.769083] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [60166.949000] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [60172.134821] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [60172.134832] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [60172.187999] wlp58s0: authenticated [60172.189701] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3) [60172.197746] wlp58s0: RX AssocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=4) [60172.200774] wlp58s0: associated [60172.249568] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab [60291.853156] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=39 end=40) time 163 us, min 1788, max 1799, scanline start 1782, end 1800 [60469.256242] wlp58s0: disconnect from AP 08:7b:87:c8:d5:ab for new auth to 24:16:1b:ce:50:0b [60469.353534] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1) [60469.353556] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3) [60469.357588] wlp58s0: authenticated [60469.363645] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3) [60469.368577] wlp58s0: RX ReassocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=12) [60469.371240] wlp58s0: associated [60469.455855] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b [60776.541915] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab [60776.623273] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [60776.623288] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [60776.626811] wlp58s0: authenticated [60776.669418] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3) [60776.677282] wlp58s0: RX ReassocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=20) [60776.681892] wlp58s0: associated [60776.717297] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab [60813.889550] wlp58s0: disconnect from AP 08:7b:87:c8:d5:ab for new auth to 24:16:1b:ce:50:0b [60813.973791] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1) [60813.973801] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3) [60813.981543] wlp58s0: authenticated [60813.985166] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3) [60813.990721] wlp58s0: RX ReassocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=9) [60813.993257] wlp58s0: associated [60814.030832] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b [60833.209519] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab [60833.284059] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [60833.284076] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [60833.291394] wlp58s0: authenticated [60833.293156] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3) [60833.305624] wlp58s0: RX ReassocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=35) [60833.308303] wlp58s0: associated [60833.345114] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab [60882.269267] wlp58s0: disconnect from AP 08:7b:87:c8:d5:ab for new auth to a4:b4:39:52:44:cb [60882.343002] wlp58s0: authenticate with a4:b4:39:52:44:cb (local address=9c:b6:d0:d1:6a:b1) [60882.343018] wlp58s0: send auth to a4:b4:39:52:44:cb (try 1/3) [60882.346713] wlp58s0: authenticated [60882.348680] wlp58s0: associate with a4:b4:39:52:44:cb (try 1/3) [60882.352775] wlp58s0: RX ReassocResp from a4:b4:39:52:44:cb (capab=0x1111 status=0 aid=7) [60882.356270] wlp58s0: associated [60882.452224] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by a4:b4:39:52:44:cb [60891.617846] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a4:b4:39:52:44:cb [60894.756887] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a4:b4:39:52:44:cb [60896.272828] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [60896.281332] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [60897.885140] wlp58s0: authenticate with 08:ec:f5:e5:06:ab (local address=9c:b6:d0:d1:6a:b1) [60897.885158] wlp58s0: send auth to 08:ec:f5:e5:06:ab (try 1/3) [60897.886239] wlp58s0: send auth to 08:ec:f5:e5:06:ab (try 2/3) [60897.887763] wlp58s0: send auth to 08:ec:f5:e5:06:ab (try 3/3) [60897.888858] wlp58s0: authentication with 08:ec:f5:e5:06:ab timed out [60900.014662] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [60900.014682] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [60900.016511] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 2/3) [60900.017592] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 3/3) [60900.018625] wlp58s0: authentication with 08:7b:87:c8:d5:ab timed out [60901.942116] wlp58s0: authenticate with 08:7b:87:ca:f2:6b (local address=9c:b6:d0:d1:6a:b1) [60901.942133] wlp58s0: send auth to 08:7b:87:ca:f2:6b (try 1/3) [60901.960875] wlp58s0: authenticated [60901.964507] wlp58s0: associate with 08:7b:87:ca:f2:6b (try 1/3) [60901.972298] wlp58s0: RX AssocResp from 08:7b:87:ca:f2:6b (capab=0x1111 status=0 aid=41) [60901.975411] wlp58s0: associated [60902.040676] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 08:7b:87:ca:f2:6b [62204.287953] wlp58s0: disconnect from AP 08:7b:87:ca:f2:6b for new auth to a4:b4:39:52:44:cb [62204.368446] wlp58s0: authenticate with a4:b4:39:52:44:cb (local address=9c:b6:d0:d1:6a:b1) [62204.368461] wlp58s0: send auth to a4:b4:39:52:44:cb (try 1/3) [62204.371964] wlp58s0: authenticated [62204.407239] wlp58s0: associate with a4:b4:39:52:44:cb (try 1/3) [62204.411437] wlp58s0: RX ReassocResp from a4:b4:39:52:44:cb (capab=0x1111 status=0 aid=10) [62204.416037] wlp58s0: associated [62204.434242] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by a4:b4:39:52:44:cb [62217.479386] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [62217.487813] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [62218.801757] wlp58s0: authenticate with 54:8a:ba:27:d1:43 (local address=9c:b6:d0:d1:6a:b1) [62218.801778] wlp58s0: send auth to 54:8a:ba:27:d1:43 (try 1/3) [62218.804073] wlp58s0: authenticated [62218.815115] wlp58s0: associate with 54:8a:ba:27:d1:43 (try 1/3) [62218.822367] wlp58s0: RX AssocResp from 54:8a:ba:27:d1:43 (capab=0x1111 status=0 aid=1) [62218.826069] wlp58s0: associated [62218.830429] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 54:8a:ba:27:d1:43 [62256.188143] wlp58s0: disconnect from AP 54:8a:ba:27:d1:43 for new auth to 54:8a:ba:27:d1:4b [62256.271148] wlp58s0: authenticate with 54:8a:ba:27:d1:4b (local address=9c:b6:d0:d1:6a:b1) [62256.271167] wlp58s0: send auth to 54:8a:ba:27:d1:4b (try 1/3) [62256.275630] wlp58s0: authenticated [62256.287620] wlp58s0: associate with 54:8a:ba:27:d1:4b (try 1/3) [62256.294644] wlp58s0: RX ReassocResp from 54:8a:ba:27:d1:4b (capab=0x1111 status=0 aid=2) [62256.298309] wlp58s0: associated [62256.314098] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d1:4b [64094.245828] systemd-sysv-generator[572976]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility. [64094.245836] systemd-sysv-generator[572976]: Please update package to include a native systemd unit file. [64094.245839] systemd-sysv-generator[572976]: ! This compatibility logic is deprecated, expect removal soon. ! [64094.695313] wlp58s0: deauthenticating from 54:8a:ba:27:d1:4b by local choice (Reason: 3=DEAUTH_LEAVING) [64097.807380] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 54:8a:ba:27:d1:4b: -110 [64097.807407] wlp58s0: failed to remove key (0, 54:8a:ba:27:d1:4b) from hardware (-110) [64113.559196] wlp58s0: authenticate with 54:8a:ba:27:d1:4b (local address=9c:b6:d0:d1:6a:b1) [64113.559217] wlp58s0: send auth to 54:8a:ba:27:d1:4b (try 1/3) [64113.562661] wlp58s0: authenticated [64113.563362] wlp58s0: associate with 54:8a:ba:27:d1:4b (try 1/3) [64113.569954] wlp58s0: RX AssocResp from 54:8a:ba:27:d1:4b (capab=0x1111 status=0 aid=2) [64113.573611] wlp58s0: associated [64113.632466] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d1:4b [64293.814114] wlp58s0: deauthenticating from 54:8a:ba:27:d1:4b by local choice (Reason: 3=DEAUTH_LEAVING) [64295.471897] PM: suspend entry (deep) [64295.487034] Filesystems sync: 0.015 seconds [64295.491472] Freezing user space processes [64295.493397] Freezing user space processes completed (elapsed 0.001 seconds) [64295.493400] OOM killer disabled. [64295.493401] Freezing remaining freezable tasks [64295.495035] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [64295.495085] printk: Suspending console(s) (use no_console_suspend to debug) [64296.098027] ACPI: EC: interrupt blocked [64296.126050] ACPI: PM: Preparing to enter system sleep state S3 [64296.136221] ACPI: EC: event blocked [64296.136226] ACPI: EC: EC stopped [64296.136228] ACPI: PM: Saving platform NVS memory [64296.139554] Disabling non-boot CPUs ... [64296.141555] smpboot: CPU 3 is now offline [64296.146634] smpboot: CPU 2 is now offline [64296.151567] smpboot: CPU 1 is now offline [64296.161519] ACPI: PM: Low-level resume complete [64296.161563] ACPI: EC: EC started [64296.161564] ACPI: PM: Restoring platform NVS memory [64296.163462] Enabling non-boot CPUs ... [64296.163489] smpboot: Booting Node 0 Processor 1 APIC 0x2 [64296.164207] CPU1 is up [64296.164222] smpboot: Booting Node 0 Processor 2 APIC 0x1 [64296.164965] CPU2 is up [64296.164982] smpboot: Booting Node 0 Processor 3 APIC 0x3 [64296.165692] CPU3 is up [64296.168529] ACPI: PM: Waking up from system sleep state S3 [64296.199967] ACPI: EC: interrupt unblocked [64296.216869] ACPI: EC: event unblocked [64296.230077] nvme nvme0: 4/0/0 default/read/poll queues [64296.459020] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [64296.471091] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [64296.626003] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [64296.731043] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [64296.987070] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [64297.131651] OOM killer enabled. [64297.131656] Restarting tasks ... done. [64297.134281] random: crng reseeded on system resumption [64297.310324] PM: suspend exit [64297.342615] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [64297.342629] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [64297.702668] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [64297.712851] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [64297.736677] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [64303.052365] wlp58s0: authenticate with 54:8a:ba:27:d8:a3 (local address=9c:b6:d0:d1:6a:b1) [64303.052372] wlp58s0: send auth to 54:8a:ba:27:d8:a3 (try 1/3) [64303.054374] wlp58s0: authenticated [64303.054736] wlp58s0: associate with 54:8a:ba:27:d8:a3 (try 1/3) [64303.078278] wlp58s0: RX AssocResp from 54:8a:ba:27:d8:a3 (capab=0x1111 status=0 aid=9) [64303.080676] wlp58s0: associated [64303.176969] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d8:a3 [65824.270069] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info [65830.414108] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info [65836.302203] ath10k_pci 0000:3a:00.0: wmi command 90124 timeout, restarting hardware [65836.302241] ath10k_pci 0000:3a:00.0: could not request peer stats info: -11 [65839.361148] ath10k_pci 0000:3a:00.0: failed to receive initialized event from target: 00000000 [65842.377010] ath10k_pci 0000:3a:00.0: failed to receive initialized event from target: 00000000 [65842.377019] ath10k_pci 0000:3a:00.0: failed to wait for target init: -110 [65842.381337] ieee80211 phy0: Hardware restart was requested [65842.677982] ath10k_pci 0000:3a:00.0: device successfully recovered [65864.238679] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=1571 end=1572) time 162 us, min 1788, max 1799, scanline start 1782, end 1800 [66308.573125] wlp58s0: deauthenticating from 54:8a:ba:27:d8:a3 by local choice (Reason: 3=DEAUTH_LEAVING) [66315.489884] wlp58s0: authenticate with 54:8a:ba:27:d8:a3 (local address=9c:b6:d0:d1:6a:b1) [66315.489892] wlp58s0: send auth to 54:8a:ba:27:d8:a3 (try 1/3) [66315.493504] wlp58s0: authenticated [66315.494141] wlp58s0: associate with 54:8a:ba:27:d8:a3 (try 1/3) [66315.501313] wlp58s0: RX AssocResp from 54:8a:ba:27:d8:a3 (capab=0x1111 status=0 aid=9) [66315.503808] wlp58s0: associated [66315.541933] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d8:a3 [66802.241834] wlp58s0: deauthenticating from 54:8a:ba:27:d8:a3 by local choice (Reason: 3=DEAUTH_LEAVING) [66804.089309] PM: suspend entry (deep) [66804.105886] Filesystems sync: 0.016 seconds [66804.110401] Freezing user space processes [66804.112533] Freezing user space processes completed (elapsed 0.002 seconds) [66804.112538] OOM killer disabled. [66804.112539] Freezing remaining freezable tasks [66805.179217] Freezing remaining freezable tasks completed (elapsed 1.066 seconds) [66805.179272] printk: Suspending console(s) (use no_console_suspend to debug) [66805.757674] ACPI: EC: interrupt blocked [66805.785058] ACPI: PM: Preparing to enter system sleep state S3 [66805.794233] ACPI: EC: event blocked [66805.794237] ACPI: EC: EC stopped [66805.794239] ACPI: PM: Saving platform NVS memory [66805.797192] Disabling non-boot CPUs ... [66805.800065] smpboot: CPU 3 is now offline [66805.806525] smpboot: CPU 2 is now offline [66805.809093] smpboot: CPU 1 is now offline [66805.816770] ACPI: PM: Low-level resume complete [66805.816813] ACPI: EC: EC started [66805.816813] ACPI: PM: Restoring platform NVS memory [66805.818709] Enabling non-boot CPUs ... [66805.818736] smpboot: Booting Node 0 Processor 1 APIC 0x2 [66805.819454] CPU1 is up [66805.819469] smpboot: Booting Node 0 Processor 2 APIC 0x1 [66805.820221] CPU2 is up [66805.820238] smpboot: Booting Node 0 Processor 3 APIC 0x3 [66805.820944] CPU3 is up [66805.823775] ACPI: PM: Waking up from system sleep state S3 [66805.854975] ACPI: EC: interrupt unblocked [66805.875830] ACPI: EC: event unblocked [66805.889395] nvme nvme0: 4/0/0 default/read/poll queues [66806.118957] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [66806.130979] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [66806.285160] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [66806.386979] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [66806.642980] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [66806.845648] OOM killer enabled. [66806.845653] Restarting tasks ... done. [66806.850589] random: crng reseeded on system resumption [66806.949045] PM: suspend exit [66807.050996] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [66807.051011] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [66807.355887] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [66807.410711] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [66807.432776] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [66812.599757] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [66812.599764] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [66812.600710] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 2/3) [66812.601950] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 3/3) [66812.602907] wlp58s0: authentication with 08:7b:87:c8:d5:ab timed out [66813.534790] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1) [66813.534805] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3) [66813.537463] wlp58s0: authenticated [66813.551188] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3) [66813.556638] wlp58s0: RX AssocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=73) [66813.560728] wlp58s0: associated [66813.651817] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b [66854.339708] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab [66854.413520] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [66854.413540] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [66854.415656] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 2/3) [66854.519190] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 3/3) [66854.627173] wlp58s0: authentication with 08:7b:87:c8:d5:ab timed out [66854.632383] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=51 end=52) time 482 us, min 1788, max 1799, scanline start 1758, end 1812 [66859.677078] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1) [66859.677099] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3) [66859.691521] wlp58s0: authenticated [66859.695159] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3) [66859.699808] wlp58s0: RX AssocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=73) [66859.702573] wlp58s0: associated [66859.731963] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b [66934.104079] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab [66934.152521] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [66934.152539] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [66934.156001] wlp58s0: authenticated [66934.159423] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3) [66934.166757] wlp58s0: RX ReassocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=28) [66934.173566] wlp58s0: associated [66934.179333] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab [67008.316223] wlp58s0: disconnect from AP 08:7b:87:c8:d5:ab for new auth to 24:16:1b:ce:50:0b [67008.408975] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1) [67008.408991] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3) [67008.419875] wlp58s0: authenticated [67008.423712] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3) [67008.429871] wlp58s0: RX ReassocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=19) [67008.432509] wlp58s0: associated [67008.518695] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b [67111.439661] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab [67111.518205] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [67111.518228] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [67111.519695] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 2/3) [67111.521024] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 3/3) [67111.524924] wlp58s0: authentication with 08:7b:87:c8:d5:ab timed out [67112.383021] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1) [67112.383038] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3) [67112.394917] wlp58s0: authenticated [67112.398934] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3) [67112.403692] wlp58s0: RX AssocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=19) [67112.407421] wlp58s0: associated [67112.454282] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b [67149.895035] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab [67149.961479] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [67149.961499] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [67149.968042] wlp58s0: authenticated [67149.970540] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3) [67149.989285] wlp58s0: RX ReassocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=1) [67149.993109] wlp58s0: associated [67150.032932] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab [68495.785425] wlp58s0: deauthenticating from 08:7b:87:c8:d5:ab by local choice (Reason: 3=DEAUTH_LEAVING) [68498.959378] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 08:7b:87:c8:d5:ab: -110 [68498.959402] wlp58s0: failed to remove key (0, 08:7b:87:c8:d5:ab) from hardware (-110) [68499.507778] PM: suspend entry (deep) [68499.530561] Filesystems sync: 0.022 seconds [68499.540710] Freezing user space processes [68499.543648] Freezing user space processes completed (elapsed 0.002 seconds) [68499.543658] OOM killer disabled. [68499.543661] Freezing remaining freezable tasks [68499.545847] Freezing remaining freezable tasks completed (elapsed 0.002 seconds) [68499.545967] printk: Suspending console(s) (use no_console_suspend to debug) [68500.142098] ACPI: EC: interrupt blocked [68500.170656] ACPI: PM: Preparing to enter system sleep state S3 [68500.181907] ACPI: EC: event blocked [68500.181912] ACPI: EC: EC stopped [68500.181913] ACPI: PM: Saving platform NVS memory [68500.185247] Disabling non-boot CPUs ... [68500.187296] smpboot: CPU 3 is now offline [68500.191907] smpboot: CPU 2 is now offline [68500.194462] smpboot: CPU 1 is now offline [68500.201744] ACPI: PM: Low-level resume complete [68500.201787] ACPI: EC: EC started [68500.201788] ACPI: PM: Restoring platform NVS memory [68500.203687] Enabling non-boot CPUs ... [68500.203711] smpboot: Booting Node 0 Processor 1 APIC 0x2 [68500.204429] CPU1 is up [68500.204444] smpboot: Booting Node 0 Processor 2 APIC 0x1 [68500.205211] CPU2 is up [68500.205228] smpboot: Booting Node 0 Processor 3 APIC 0x3 [68500.205942] CPU3 is up [68500.208782] ACPI: PM: Waking up from system sleep state S3 [68500.239195] ACPI: EC: interrupt unblocked [68500.254795] ACPI: EC: event unblocked [68500.271111] nvme nvme0: 4/0/0 default/read/poll queues [68500.503422] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [68500.507436] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [68500.671985] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [68500.763418] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [68501.019489] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [68501.159237] OOM killer enabled. [68501.159241] Restarting tasks ... done. [68501.160511] random: crng reseeded on system resumption [68501.272575] PM: suspend exit [68501.363544] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [68501.363559] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [68501.722545] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [68501.727545] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [68501.745190] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [68507.086439] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1) [68507.086458] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3) [68507.099409] wlp58s0: authenticated [68507.103407] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3) [68507.112994] wlp58s0: RX AssocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=1) [68507.115958] wlp58s0: associated [68507.204660] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab [70045.460810] wlp58s0: Connection to AP 08:7b:87:c8:d5:ab lost [70050.573542] wlp58s0: authenticate with 70:f0:96:8b:bb:eb (local address=9c:b6:d0:d1:6a:b1) [70050.573564] wlp58s0: send auth to 70:f0:96:8b:bb:eb (try 1/3) [70050.575873] wlp58s0: authenticated [70050.632940] wlp58s0: associate with 70:f0:96:8b:bb:eb (try 1/3) [70050.637133] wlp58s0: RX AssocResp from 70:f0:96:8b:bb:eb (capab=0x1111 status=0 aid=17) [70050.640276] wlp58s0: associated [70050.655704] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:f0:96:8b:bb:eb [71655.998010] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=10 end=11) time 179 us, min 1788, max 1799, scanline start 1780, end 1800 [78728.994825] wlp58s0: deauthenticating from 70:f0:96:8b:bb:eb by local choice (Reason: 3=DEAUTH_LEAVING) [78732.228008] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 70:f0:96:8b:bb:eb: -110 [78732.228042] wlp58s0: failed to remove key (0, 70:f0:96:8b:bb:eb) from hardware (-110) [78732.879345] PM: suspend entry (deep) [78732.894108] Filesystems sync: 0.014 seconds [78732.896724] Freezing user space processes [78732.898641] Freezing user space processes completed (elapsed 0.001 seconds) [78732.898644] OOM killer disabled. [78732.898645] Freezing remaining freezable tasks [78732.900217] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [78732.900265] printk: Suspending console(s) (use no_console_suspend to debug) [78733.503139] ACPI: EC: interrupt blocked [78733.530995] ACPI: PM: Preparing to enter system sleep state S3 [78733.541421] ACPI: EC: event blocked [78733.541426] ACPI: EC: EC stopped [78733.541428] ACPI: PM: Saving platform NVS memory [78733.544795] Disabling non-boot CPUs ... [78733.546894] smpboot: CPU 3 is now offline [78733.550149] smpboot: CPU 2 is now offline [78733.554781] smpboot: CPU 1 is now offline [78733.561879] ACPI: PM: Low-level resume complete [78733.561923] ACPI: EC: EC started [78733.561923] ACPI: PM: Restoring platform NVS memory [78733.563820] Enabling non-boot CPUs ... [78733.563847] smpboot: Booting Node 0 Processor 1 APIC 0x2 [78733.564898] CPU1 is up [78733.564916] smpboot: Booting Node 0 Processor 2 APIC 0x1 [78733.565669] CPU2 is up [78733.565684] smpboot: Booting Node 0 Processor 3 APIC 0x3 [78733.566390] CPU3 is up [78733.569238] ACPI: PM: Waking up from system sleep state S3 [78733.599480] ACPI: EC: interrupt unblocked [78733.614664] ACPI: EC: event unblocked [78733.627428] nvme nvme0: 4/0/0 default/read/poll queues [78733.864071] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [78733.872089] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [78734.034665] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [78734.128065] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [78734.384097] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [78734.586272] OOM killer enabled. [78734.586276] Restarting tasks ... done. [78734.590690] random: crng reseeded on system resumption [78734.714405] PM: suspend exit [78734.795753] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [78734.795770] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [78735.089309] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [78735.155779] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [78735.177773] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [78740.770662] wlp58s0: authenticate with 68:71:61:0b:2e:0b (local address=9c:b6:d0:d1:6a:b1) [78740.770669] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 1/3) [78740.772280] wlp58s0: authenticated [78740.776011] wlp58s0: associate with 68:71:61:0b:2e:0b (try 1/3) [78740.782694] wlp58s0: RX AssocResp from 68:71:61:0b:2e:0b (capab=0x1111 status=0 aid=66) [78740.785264] wlp58s0: associated [78740.881332] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 68:71:61:0b:2e:0b [78824.232854] audit: type=1400 audit(1742664573.664:356): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/etc/paperspecs" pid=726706 comm="paperconf" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0 [78827.968722] audit: type=1400 audit(1742664577.400:357): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/profiles.ini" pid=726694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [78827.981370] audit: type=1400 audit(1742664577.412:358): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/cert9.db" pid=726694 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=5272 ouid=5272 [78827.981446] audit: type=1400 audit(1742664577.412:359): apparmor="ALLOWED" operation="file_lock" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/cert9.db" pid=726694 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=5272 ouid=5272 [78827.982399] audit: type=1400 audit(1742664577.412:360): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/key4.db" pid=726694 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=5272 ouid=5272 [78827.982403] audit: type=1400 audit(1742664577.412:361): apparmor="ALLOWED" operation="file_lock" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/key4.db" pid=726694 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=5272 ouid=5272 [78924.955125] wlp58s0: disconnect from AP 68:71:61:0b:2e:0b for new auth to b0:8b:cf:71:30:8c [78928.074526] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 68:71:61:0b:2e:0b: -110 [78928.074555] wlp58s0: failed to remove key (0, 68:71:61:0b:2e:0b) from hardware (-110) [78928.122540] wlp58s0: authenticate with b0:8b:cf:71:30:8c (local address=9c:b6:d0:d1:6a:b1) [78928.122563] wlp58s0: send auth to b0:8b:cf:71:30:8c (try 1/3) [78928.126456] wlp58s0: send auth to b0:8b:cf:71:30:8c (try 2/3) [78928.128266] wlp58s0: send auth to b0:8b:cf:71:30:8c (try 3/3) [78928.130088] wlp58s0: authentication with b0:8b:cf:71:30:8c timed out [78928.953981] wlp58s0: authenticate with e4:aa:5d:16:ee:9f (local address=9c:b6:d0:d1:6a:b1) [78928.954007] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 1/3) [78928.955462] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 2/3) [78928.957234] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 3/3) [78928.958983] wlp58s0: authentication with e4:aa:5d:16:ee:9f timed out [78929.704123] wlp58s0: authenticate with 68:71:61:0b:2e:0b (local address=9c:b6:d0:d1:6a:b1) [78929.704144] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 1/3) [78929.705419] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 2/3) [78929.707202] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 3/3) [78929.708704] wlp58s0: authentication with 68:71:61:0b:2e:0b timed out [78935.670938] wlp58s0: authenticate with 68:71:61:0b:2e:0b (local address=9c:b6:d0:d1:6a:b1) [78935.670967] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 1/3) [78935.673517] wlp58s0: authenticated [78935.682403] wlp58s0: associate with 68:71:61:0b:2e:0b (try 1/3) [78935.686302] wlp58s0: RX AssocResp from 68:71:61:0b:2e:0b (capab=0x1111 status=0 aid=30) [78935.691476] wlp58s0: associated [78937.487650] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 68:71:61:0b:2e:0b [78943.149817] wlp58s0: deauthenticating from 68:71:61:0b:2e:0b by local choice (Reason: 3=DEAUTH_LEAVING) [78943.896035] wlp58s0: authenticate with e4:aa:5d:16:ee:9f (local address=9c:b6:d0:d1:6a:b1) [78943.896052] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 1/3) [78943.897151] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 2/3) [78943.898379] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 3/3) [78943.899579] wlp58s0: authentication with e4:aa:5d:16:ee:9f timed out [78954.141327] wlp58s0: authenticate with 68:71:61:0b:2e:0b (local address=9c:b6:d0:d1:6a:b1) [78954.141344] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 1/3) [78954.143530] wlp58s0: authenticated [78954.146246] wlp58s0: associate with 68:71:61:0b:2e:0b (try 1/3) [78954.151178] wlp58s0: RX AssocResp from 68:71:61:0b:2e:0b (capab=0x1111 status=0 aid=60) [78954.156787] wlp58s0: associated [78954.177857] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 68:71:61:0b:2e:0b [78959.814765] wlp58s0: deauthenticating from 68:71:61:0b:2e:0b by local choice (Reason: 3=DEAUTH_LEAVING) [78995.485489] wlp58s0: authenticate with f0:7f:06:3b:12:43 (local address=9c:b6:d0:d1:6a:b1) [78995.485501] wlp58s0: send auth to f0:7f:06:3b:12:43 (try 1/3) [78995.487054] wlp58s0: send auth to f0:7f:06:3b:12:43 (try 2/3) [78995.488538] wlp58s0: send auth to f0:7f:06:3b:12:43 (try 3/3) [78995.490050] wlp58s0: authentication with f0:7f:06:3b:12:43 timed out [78995.945466] wlp58s0: authenticate with 08:ec:f5:e3:2a:ec (local address=9c:b6:d0:d1:6a:b1) [78995.945486] wlp58s0: send auth to 08:ec:f5:e3:2a:ec (try 1/3) [78995.946730] wlp58s0: send auth to 08:ec:f5:e3:2a:ec (try 2/3) [78995.948547] wlp58s0: send auth to 08:ec:f5:e3:2a:ec (try 3/3) [78995.949684] wlp58s0: authentication with 08:ec:f5:e3:2a:ec timed out [78996.652232] wlp58s0: authenticate with f4:4e:05:43:c1:73 (local address=9c:b6:d0:d1:6a:b1) [78996.652253] wlp58s0: send auth to f4:4e:05:43:c1:73 (try 1/3) [78996.653869] wlp58s0: send auth to f4:4e:05:43:c1:73 (try 2/3) [78996.655578] wlp58s0: send auth to f4:4e:05:43:c1:73 (try 3/3) [78996.657170] wlp58s0: authentication with f4:4e:05:43:c1:73 timed out [78997.809174] wlp58s0: authenticate with 08:7b:87:c8:ca:63 (local address=9c:b6:d0:d1:6a:b1) [78997.809190] wlp58s0: send auth to 08:7b:87:c8:ca:63 (try 1/3) [78997.811330] wlp58s0: send auth to 08:7b:87:c8:ca:63 (try 2/3) [78997.812951] wlp58s0: send auth to 08:7b:87:c8:ca:63 (try 3/3) [78997.814409] wlp58s0: authentication with 08:7b:87:c8:ca:63 timed out [79449.663716] PM: suspend entry (deep) [79449.674315] Filesystems sync: 0.010 seconds [79449.677138] Freezing user space processes [79449.678944] Freezing user space processes completed (elapsed 0.001 seconds) [79449.678947] OOM killer disabled. [79449.678948] Freezing remaining freezable tasks [79449.680482] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [79449.680533] printk: Suspending console(s) (use no_console_suspend to debug) [79450.268752] ACPI: EC: interrupt blocked [79450.297054] ACPI: PM: Preparing to enter system sleep state S3 [79450.307145] ACPI: EC: event blocked [79450.307149] ACPI: EC: EC stopped [79450.307151] ACPI: PM: Saving platform NVS memory [79450.310480] Disabling non-boot CPUs ... [79450.312445] smpboot: CPU 3 is now offline [79450.316594] smpboot: CPU 2 is now offline [79450.320011] smpboot: CPU 1 is now offline [79450.327828] ACPI: PM: Low-level resume complete [79450.327869] ACPI: EC: EC started [79450.327870] ACPI: PM: Restoring platform NVS memory [79450.329767] Enabling non-boot CPUs ... [79450.329792] smpboot: Booting Node 0 Processor 1 APIC 0x2 [79450.330530] CPU1 is up [79450.330546] smpboot: Booting Node 0 Processor 2 APIC 0x1 [79450.331290] CPU2 is up [79450.331307] smpboot: Booting Node 0 Processor 3 APIC 0x3 [79450.332001] CPU3 is up [79450.334843] ACPI: PM: Waking up from system sleep state S3 [79450.365904] ACPI: EC: interrupt unblocked [79450.382285] ACPI: EC: event unblocked [79450.393830] nvme nvme0: 4/0/0 default/read/poll queues [79450.618207] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [79450.634244] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [79450.784671] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [79450.898184] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [79451.154228] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [79451.357204] OOM killer enabled. [79451.357209] Restarting tasks ... done. [79451.361566] random: crng reseeded on system resumption [79451.485673] PM: suspend exit [79451.563887] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [79451.563893] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [79451.857107] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [79451.919953] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [79451.943847] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [79472.334302] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=49 end=50) time 166 us, min 1788, max 1799, scanline start 1781, end 1800 [79477.892077] wlp58s0: authenticate with cc:2d:e0:e7:3b:5b (local address=9c:b6:d0:d1:6a:b1) [79477.892089] wlp58s0: send auth to cc:2d:e0:e7:3b:5b (try 1/3) [79477.896847] wlp58s0: authenticated [79477.901971] wlp58s0: associate with cc:2d:e0:e7:3b:5b (try 1/3) [79477.910266] wlp58s0: RX AssocResp from cc:2d:e0:e7:3b:5b (capab=0x401 status=0 aid=1) [79477.913294] wlp58s0: associated [80032.475684] wlp58s0: deauthenticating from cc:2d:e0:e7:3b:5b by local choice (Reason: 3=DEAUTH_LEAVING) [80034.183726] PM: suspend entry (deep) [80034.193374] Filesystems sync: 0.009 seconds [80034.197835] Freezing user space processes [80034.199795] Freezing user space processes completed (elapsed 0.001 seconds) [80034.199799] OOM killer disabled. [80034.199800] Freezing remaining freezable tasks [80034.201417] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [80034.201467] printk: Suspending console(s) (use no_console_suspend to debug) [80034.812382] ACPI: EC: interrupt blocked [80034.840785] ACPI: PM: Preparing to enter system sleep state S3 [80034.854706] ACPI: EC: event blocked [80034.854711] ACPI: EC: EC stopped [80034.854713] ACPI: PM: Saving platform NVS memory [80034.858220] Disabling non-boot CPUs ... [80034.860344] smpboot: CPU 3 is now offline [80034.866500] smpboot: CPU 2 is now offline [80034.869730] smpboot: CPU 1 is now offline [80034.874979] ACPI: PM: Low-level resume complete [80034.875024] ACPI: EC: EC started [80034.875025] ACPI: PM: Restoring platform NVS memory [80034.876943] Enabling non-boot CPUs ... [80034.876968] smpboot: Booting Node 0 Processor 1 APIC 0x2 [80034.877687] CPU1 is up [80034.877703] smpboot: Booting Node 0 Processor 2 APIC 0x1 [80034.878447] CPU2 is up [80034.878463] smpboot: Booting Node 0 Processor 3 APIC 0x3 [80034.879173] CPU3 is up [80034.882022] ACPI: PM: Waking up from system sleep state S3 [80034.916027] ACPI: EC: interrupt unblocked [80034.957211] ACPI: EC: event unblocked [80034.970844] nvme nvme0: 4/0/0 default/read/poll queues [80035.207493] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [80035.215432] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [80035.463495] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [80035.719500] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [80035.922179] OOM killer enabled. [80035.922183] Restarting tasks ... done. [80035.923639] random: crng reseeded on system resumption [80036.048922] PM: suspend exit [80036.125954] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [80036.125966] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [80036.406674] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [80036.482321] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [80036.505146] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [80051.463491] wlp58s0: authenticate with 24:5a:4c:82:c8:2b (local address=9c:b6:d0:d1:6a:b1) [80051.463512] wlp58s0: send auth to 24:5a:4c:82:c8:2b (try 1/3) [80051.466560] wlp58s0: authenticated [80051.467374] wlp58s0: associate with 24:5a:4c:82:c8:2b (try 1/3) [80051.473409] wlp58s0: RX AssocResp from 24:5a:4c:82:c8:2b (capab=0x1101 status=0 aid=5) [80051.476280] wlp58s0: associated [80553.236495] wlp58s0: deauthenticating from 24:5a:4c:82:c8:2b by local choice (Reason: 3=DEAUTH_LEAVING) [80554.991043] PM: suspend entry (deep) [80555.011467] Filesystems sync: 0.020 seconds [80555.014355] Freezing user space processes [80555.016157] Freezing user space processes completed (elapsed 0.001 seconds) [80555.016161] OOM killer disabled. [80555.016162] Freezing remaining freezable tasks [80555.017702] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [80555.017753] printk: Suspending console(s) (use no_console_suspend to debug) [80555.609423] ACPI: EC: interrupt blocked [80555.638486] ACPI: PM: Preparing to enter system sleep state S3 [80555.648617] ACPI: EC: event blocked [80555.648622] ACPI: EC: EC stopped [80555.648624] ACPI: PM: Saving platform NVS memory [80555.651913] Disabling non-boot CPUs ... [80555.655287] smpboot: CPU 3 is now offline [80555.661102] smpboot: CPU 2 is now offline [80555.663969] smpboot: CPU 1 is now offline [80555.671122] ACPI: PM: Low-level resume complete [80555.671165] ACPI: EC: EC started [80555.671166] ACPI: PM: Restoring platform NVS memory [80555.673064] Enabling non-boot CPUs ... [80555.673088] smpboot: Booting Node 0 Processor 1 APIC 0x2 [80555.673807] CPU1 is up [80555.673823] smpboot: Booting Node 0 Processor 2 APIC 0x1 [80555.674588] CPU2 is up [80555.674605] smpboot: Booting Node 0 Processor 3 APIC 0x3 [80555.675322] CPU3 is up [80555.678136] ACPI: PM: Waking up from system sleep state S3 [80555.711190] ACPI: EC: interrupt unblocked [80555.749095] ACPI: EC: event unblocked [80555.762774] nvme nvme0: 4/0/0 default/read/poll queues [80555.991180] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [80555.999232] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [80556.161814] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [80556.255219] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [80556.511202] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [80556.713361] OOM killer enabled. [80556.713365] Restarting tasks ... done. [80556.715322] random: crng reseeded on system resumption [80556.867452] PM: suspend exit [80556.916906] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [80556.916912] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [80557.277396] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [80557.278805] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [80557.300881] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [81194.287588] PM: suspend entry (deep) [81194.317102] Filesystems sync: 0.029 seconds [81194.325738] Freezing user space processes [81194.328246] Freezing user space processes completed (elapsed 0.002 seconds) [81194.328255] OOM killer disabled. [81194.328258] Freezing remaining freezable tasks [81194.330152] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [81194.330272] printk: Suspending console(s) (use no_console_suspend to debug) [81194.936538] ACPI: EC: interrupt blocked [81194.964765] ACPI: PM: Preparing to enter system sleep state S3 [81194.974055] ACPI: EC: event blocked [81194.974060] ACPI: EC: EC stopped [81194.974061] ACPI: PM: Saving platform NVS memory [81194.977019] Disabling non-boot CPUs ... [81194.979878] smpboot: CPU 3 is now offline [81194.983486] smpboot: CPU 2 is now offline [81194.986086] smpboot: CPU 1 is now offline [81194.995995] ACPI: PM: Low-level resume complete [81194.996040] ACPI: EC: EC started [81194.996041] ACPI: PM: Restoring platform NVS memory [81194.997954] Enabling non-boot CPUs ... [81194.997981] smpboot: Booting Node 0 Processor 1 APIC 0x2 [81194.998695] CPU1 is up [81194.998711] smpboot: Booting Node 0 Processor 2 APIC 0x1 [81194.999483] CPU2 is up [81194.999499] smpboot: Booting Node 0 Processor 3 APIC 0x3 [81195.000214] CPU3 is up [81195.003048] ACPI: PM: Waking up from system sleep state S3 [81195.039285] ACPI: EC: interrupt unblocked [81195.111479] ACPI: EC: event unblocked [81195.123468] nvme nvme0: 4/0/0 default/read/poll queues [81195.361905] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [81195.365886] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [81195.529468] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [81195.617901] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [81195.873865] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [81196.017593] OOM killer enabled. [81196.017596] Restarting tasks ... done. [81196.019018] random: crng reseeded on system resumption [81196.132935] PM: suspend exit [81196.219501] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [81196.219507] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [81196.528742] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [81196.576036] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [81196.603569] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [81212.167267] audit: type=1400 audit(1742670568.164:362): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.crossover.conf" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.167731] audit: type=1400 audit(1742670568.164:363): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.gdbinit" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.168031] audit: type=1400 audit(1742670568.164:364): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.pciids-cache" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.169090] audit: type=1400 audit(1742670568.164:365): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.crossover.conf" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.169951] audit: type=1400 audit(1742670568.168:366): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.gdbinit" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.170144] audit: type=1400 audit(1742670568.168:367): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.pciids-cache" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.171247] audit: type=1400 audit(1742670568.168:368): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/20181231-105503--initcall.dmesg" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.171253] audit: type=1400 audit(1742670568.168:369): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/20181231-105503--initcall.dmesg" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.174402] audit: type=1400 audit(1742670568.172:370): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/BIOS_8F9DN_LN_1.15.0.BIN" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81212.174409] audit: type=1400 audit(1742670568.172:371): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/BIOS_8F9DN_LN_1.15.0.BIN" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272 [81230.177657] wlp58s0: authenticate with 28:b3:71:10:33:2c (local address=9c:b6:d0:d1:6a:b1) [81230.177664] wlp58s0: send auth to 28:b3:71:10:33:2c (try 1/3) [81230.181191] wlp58s0: authenticated [81230.181591] wlp58s0: associate with 28:b3:71:10:33:2c (try 1/3) [81230.184307] wlp58s0: RX AssocResp from 28:b3:71:10:33:2c (capab=0x1001 status=0 aid=1) [81230.186951] wlp58s0: associated [81230.202977] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:b3:71:10:33:2c [81942.880499] wlp58s0: deauthenticating from 28:b3:71:10:33:2c by local choice (Reason: 3=DEAUTH_LEAVING) [81944.332606] PM: suspend entry (deep) [81944.342887] Filesystems sync: 0.010 seconds [81944.347572] Freezing user space processes [81944.349569] Freezing user space processes completed (elapsed 0.001 seconds) [81944.349574] OOM killer disabled. [81944.349576] Freezing remaining freezable tasks [81944.692485] Freezing remaining freezable tasks completed (elapsed 0.342 seconds) [81944.692540] printk: Suspending console(s) (use no_console_suspend to debug) [81945.269642] ACPI: EC: interrupt blocked [81945.300200] ACPI: PM: Preparing to enter system sleep state S3 [81945.311364] ACPI: EC: event blocked [81945.311369] ACPI: EC: EC stopped [81945.311371] ACPI: PM: Saving platform NVS memory [81945.314708] Disabling non-boot CPUs ... [81945.316909] smpboot: CPU 3 is now offline [81945.320330] smpboot: CPU 2 is now offline [81945.324173] smpboot: CPU 1 is now offline [81945.333266] ACPI: PM: Low-level resume complete [81945.333312] ACPI: EC: EC started [81945.333312] ACPI: PM: Restoring platform NVS memory [81945.335219] Enabling non-boot CPUs ... [81945.335243] smpboot: Booting Node 0 Processor 1 APIC 0x2 [81945.335967] CPU1 is up [81945.335983] smpboot: Booting Node 0 Processor 2 APIC 0x1 [81945.336752] CPU2 is up [81945.336769] smpboot: Booting Node 0 Processor 3 APIC 0x3 [81945.337480] CPU3 is up [81945.340328] ACPI: PM: Waking up from system sleep state S3 [81945.369101] ACPI: EC: interrupt unblocked [81945.425146] ACPI: EC: event unblocked [81945.439527] nvme nvme0: 4/0/0 default/read/poll queues [81945.678991] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [81945.679002] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [81945.934992] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [81946.191038] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [81946.330390] OOM killer enabled. [81946.330394] Restarting tasks ... done. [81946.334113] random: crng reseeded on system resumption [81946.446921] PM: suspend exit [81946.535694] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [81946.535707] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [81946.865992] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [81946.892318] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [81946.916665] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [82548.093072] wlp58s0: authenticate with d2:21:f9:91:80:84 (local address=9c:b6:d0:d1:6a:b1) [82548.093080] wlp58s0: send auth to d2:21:f9:91:80:84 (try 1/3) [82548.095606] wlp58s0: authenticated [82548.101629] wlp58s0: associate with d2:21:f9:91:80:84 (try 1/3) [82548.105596] wlp58s0: RX AssocResp from d2:21:f9:91:80:84 (capab=0x1111 status=0 aid=1) [82548.108437] wlp58s0: associated [82548.130121] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by d2:21:f9:91:80:84 [82566.869479] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [82566.877771] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [82567.608587] wlp58s0: authenticate with 7a:45:58:9f:76:88 (local address=9c:b6:d0:d1:6a:b1) [82567.608595] wlp58s0: send auth to 7a:45:58:9f:76:88 (try 1/3) [82567.610984] wlp58s0: authenticated [82567.613418] wlp58s0: associate with 7a:45:58:9f:76:88 (try 1/3) [82567.616640] wlp58s0: RX AssocResp from 7a:45:58:9f:76:88 (capab=0x1111 status=0 aid=2) [82567.619290] wlp58s0: associated [82590.929459] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [82590.936873] wlp58s0: Connection to AP 00:00:00:00:00:00 lost [82591.654861] wlp58s0: authenticate with 7a:45:58:9f:76:88 (local address=9c:b6:d0:d1:6a:b1) [82591.654888] wlp58s0: send auth to 7a:45:58:9f:76:88 (try 1/3) [82591.656371] wlp58s0: send auth to 7a:45:58:9f:76:88 (try 2/3) [82591.658544] wlp58s0: send auth to 7a:45:58:9f:76:88 (try 3/3) [82591.659889] wlp58s0: authentication with 7a:45:58:9f:76:88 timed out [82611.444631] wlp58s0: authenticate with 2e:91:ab:ed:77:71 (local address=9c:b6:d0:d1:6a:b1) [82611.444651] wlp58s0: send auth to 2e:91:ab:ed:77:71 (try 1/3) [82611.450072] wlp58s0: send auth to 2e:91:ab:ed:77:71 (try 2/3) [82611.454855] wlp58s0: send auth to 2e:91:ab:ed:77:71 (try 3/3) [82611.459763] wlp58s0: authentication with 2e:91:ab:ed:77:71 timed out [82612.701481] wlp58s0: authenticate with 2e:91:ab:ed:77:72 (local address=9c:b6:d0:d1:6a:b1) [82612.701497] wlp58s0: send auth to 2e:91:ab:ed:77:72 (try 1/3) [82612.702877] wlp58s0: send auth to 2e:91:ab:ed:77:72 (try 2/3) [82612.704297] wlp58s0: send auth to 2e:91:ab:ed:77:72 (try 3/3) [82612.705966] wlp58s0: authentication with 2e:91:ab:ed:77:72 timed out [82998.429769] PM: suspend entry (deep) [82998.449956] Filesystems sync: 0.020 seconds [82998.452789] Freezing user space processes [82998.454583] Freezing user space processes completed (elapsed 0.001 seconds) [82998.454587] OOM killer disabled. [82998.454587] Freezing remaining freezable tasks [82998.456139] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [82998.456191] printk: Suspending console(s) (use no_console_suspend to debug) [82999.064304] ACPI: EC: interrupt blocked [82999.092734] ACPI: PM: Preparing to enter system sleep state S3 [82999.101920] ACPI: EC: event blocked [82999.101924] ACPI: EC: EC stopped [82999.101925] ACPI: PM: Saving platform NVS memory [82999.105077] Disabling non-boot CPUs ... [82999.108164] smpboot: CPU 3 is now offline [82999.112135] smpboot: CPU 2 is now offline [82999.115258] smpboot: CPU 1 is now offline [82999.122852] ACPI: PM: Low-level resume complete [82999.122897] ACPI: EC: EC started [82999.122898] ACPI: PM: Restoring platform NVS memory [82999.124823] Enabling non-boot CPUs ... [82999.124849] smpboot: Booting Node 0 Processor 1 APIC 0x2 [82999.125561] CPU1 is up [82999.125577] smpboot: Booting Node 0 Processor 2 APIC 0x1 [82999.126331] CPU2 is up [82999.126349] smpboot: Booting Node 0 Processor 3 APIC 0x3 [82999.127048] CPU3 is up [82999.129898] ACPI: PM: Waking up from system sleep state S3 [82999.160622] ACPI: EC: interrupt unblocked [82999.198119] ACPI: EC: event unblocked [82999.210934] nvme nvme0: 4/0/0 default/read/poll queues [82999.435837] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [82999.447802] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [82999.601177] atkbd_receive_byte: 210 callbacks suppressed [82999.601183] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [82999.703804] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [82999.959865] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [83000.103227] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [83000.103232] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [83000.104056] OOM killer enabled. [83000.104059] Restarting tasks ... done. [83000.107857] random: crng reseeded on system resumption [83000.228820] PM: suspend exit [83000.461164] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [83000.485689] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [83000.658984] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [83022.448732] wlp58s0: authenticate with 00:f6:63:34:4a:3b (local address=9c:b6:d0:d1:6a:b1) [83022.448741] wlp58s0: send auth to 00:f6:63:34:4a:3b (try 1/3) [83022.449703] wlp58s0: authenticated [83022.451595] wlp58s0: associate with 00:f6:63:34:4a:3b (try 1/3) [83022.455529] wlp58s0: RX AssocResp from 00:f6:63:34:4a:3b (capab=0x1111 status=0 aid=11) [83022.458230] wlp58s0: associated [83022.508384] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:f6:63:34:4a:3b [83346.543974] wlp58s0: deauthenticating from 00:f6:63:34:4a:3b by local choice (Reason: 3=DEAUTH_LEAVING) [83348.183964] PM: suspend entry (deep) [83348.196134] Filesystems sync: 0.012 seconds [83348.206718] Freezing user space processes [83348.209361] Freezing user space processes completed (elapsed 0.002 seconds) [83348.209376] OOM killer disabled. [83348.209380] Freezing remaining freezable tasks [83348.211516] Freezing remaining freezable tasks completed (elapsed 0.002 seconds) [83348.211649] printk: Suspending console(s) (use no_console_suspend to debug) [83348.817093] ACPI: EC: interrupt blocked [83348.845391] ACPI: PM: Preparing to enter system sleep state S3 [83348.857735] ACPI: EC: event blocked [83348.857741] ACPI: EC: EC stopped [83348.857743] ACPI: PM: Saving platform NVS memory [83348.861285] Disabling non-boot CPUs ... [83348.863456] smpboot: CPU 3 is now offline [83348.870360] smpboot: CPU 2 is now offline [83348.881357] smpboot: CPU 1 is now offline [83348.888692] ACPI: PM: Low-level resume complete [83348.888735] ACPI: EC: EC started [83348.888735] ACPI: PM: Restoring platform NVS memory [83348.890635] Enabling non-boot CPUs ... [83348.890661] smpboot: Booting Node 0 Processor 1 APIC 0x2 [83348.891377] CPU1 is up [83348.891392] smpboot: Booting Node 0 Processor 2 APIC 0x1 [83348.892134] CPU2 is up [83348.892151] smpboot: Booting Node 0 Processor 3 APIC 0x3 [83348.892859] CPU3 is up [83348.895704] ACPI: PM: Waking up from system sleep state S3 [83348.927945] ACPI: EC: interrupt unblocked [83348.942518] ACPI: EC: event unblocked [83348.955384] nvme nvme0: 4/0/0 default/read/poll queues [83349.188992] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [83349.193020] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [83349.353366] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [83349.448959] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [83349.704943] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [83349.907141] OOM killer enabled. [83349.907144] Restarting tasks ... done. [83349.908245] random: crng reseeded on system resumption [83349.995852] PM: suspend exit [83350.112131] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [83350.112143] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [83350.416182] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [83350.472978] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [83350.498668] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [83379.652667] PM: suspend entry (deep) [83379.667287] Filesystems sync: 0.014 seconds [83379.676376] Freezing user space processes [83379.679254] Freezing user space processes completed (elapsed 0.002 seconds) [83379.679265] OOM killer disabled. [83379.679268] Freezing remaining freezable tasks [83379.681211] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [83379.681330] printk: Suspending console(s) (use no_console_suspend to debug) [83380.279695] ACPI: EC: interrupt blocked [83380.306853] ACPI: PM: Preparing to enter system sleep state S3 [83380.317051] ACPI: EC: event blocked [83380.317056] ACPI: EC: EC stopped [83380.317058] ACPI: PM: Saving platform NVS memory [83380.320321] Disabling non-boot CPUs ... [83380.322347] smpboot: CPU 3 is now offline [83380.325825] smpboot: CPU 2 is now offline [83380.329359] smpboot: CPU 1 is now offline [83380.336085] ACPI: PM: Low-level resume complete [83380.336129] ACPI: EC: EC started [83380.336130] ACPI: PM: Restoring platform NVS memory [83380.338053] Enabling non-boot CPUs ... [83380.338080] smpboot: Booting Node 0 Processor 1 APIC 0x2 [83380.338810] CPU1 is up [83380.338826] smpboot: Booting Node 0 Processor 2 APIC 0x1 [83380.339613] CPU2 is up [83380.339630] smpboot: Booting Node 0 Processor 3 APIC 0x3 [83380.340342] CPU3 is up [83380.343174] ACPI: PM: Waking up from system sleep state S3 [83380.372600] ACPI: EC: interrupt unblocked [83380.388633] ACPI: EC: event unblocked [83380.401518] nvme nvme0: 4/0/0 default/read/poll queues [83380.618972] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [83380.638950] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [83380.789765] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [83380.894960] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [83381.151027] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [83381.295168] OOM killer enabled. [83381.295174] Restarting tasks ... done. [83381.297359] random: crng reseeded on system resumption [83381.400449] PM: suspend exit [83381.502159] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [83381.502177] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [83381.861428] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [83381.876644] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [83381.884715] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [83387.054303] wlp58s0: authenticate with 28:b3:71:10:33:2c (local address=9c:b6:d0:d1:6a:b1) [83387.054309] wlp58s0: send auth to 28:b3:71:10:33:2c (try 1/3) [83387.055440] wlp58s0: authenticated [83387.058915] wlp58s0: associate with 28:b3:71:10:33:2c (try 1/3) [83387.060645] wlp58s0: RX AssocResp from 28:b3:71:10:33:2c (capab=0x1001 status=0 aid=1) [83387.063203] wlp58s0: associated [83387.155992] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:b3:71:10:33:2c [102594.501880] wlp58s0: deauthenticating from 28:b3:71:10:33:2c by local choice (Reason: 3=DEAUTH_LEAVING) [102596.122156] PM: suspend entry (deep) [102596.136690] Filesystems sync: 0.014 seconds [102596.142919] Freezing user space processes [102596.144902] Freezing user space processes completed (elapsed 0.001 seconds) [102596.144907] OOM killer disabled. [102596.144909] Freezing remaining freezable tasks [102596.146602] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [102596.146716] printk: Suspending console(s) (use no_console_suspend to debug) [102596.745399] ACPI: EC: interrupt blocked [102596.772604] ACPI: PM: Preparing to enter system sleep state S3 [102596.782736] ACPI: EC: event blocked [102596.782740] ACPI: EC: EC stopped [102596.782742] ACPI: PM: Saving platform NVS memory [102596.785982] Disabling non-boot CPUs ... [102596.788110] smpboot: CPU 3 is now offline [102596.792361] smpboot: CPU 2 is now offline [102596.796230] smpboot: CPU 1 is now offline [102596.803382] ACPI: PM: Low-level resume complete [102596.803425] ACPI: EC: EC started [102596.803426] ACPI: PM: Restoring platform NVS memory [102596.805327] Enabling non-boot CPUs ... [102596.805354] smpboot: Booting Node 0 Processor 1 APIC 0x2 [102596.806096] CPU1 is up [102596.806113] smpboot: Booting Node 0 Processor 2 APIC 0x1 [102596.806884] CPU2 is up [102596.806901] smpboot: Booting Node 0 Processor 3 APIC 0x3 [102596.807649] CPU3 is up [102596.810481] ACPI: PM: Waking up from system sleep state S3 [102596.852661] ACPI: EC: interrupt unblocked [102596.912189] ACPI: EC: event unblocked [102596.925999] nvme nvme0: 4/0/0 default/read/poll queues [102597.174459] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [102597.210431] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [102597.466468] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [102597.722518] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [102597.862382] OOM killer enabled. [102597.862386] Restarting tasks ... done. [102597.863899] random: crng reseeded on system resumption [102597.906103] PM: suspend exit [102598.067789] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [102598.331167] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [102603.541484] wlp58s0: authenticate with 28:b3:71:10:33:2c (local address=9c:b6:d0:d1:6a:b1) [102603.541491] wlp58s0: send auth to 28:b3:71:10:33:2c (try 1/3) [102603.542500] wlp58s0: authenticated [102603.546409] wlp58s0: associate with 28:b3:71:10:33:2c (try 1/3) [102603.548101] wlp58s0: RX AssocResp from 28:b3:71:10:33:2c (capab=0x1001 status=0 aid=1) [102603.550432] wlp58s0: associated [102603.575423] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:b3:71:10:33:2c [103334.008449] wlp58s0: deauthenticating from 28:b3:71:10:33:2c by local choice (Reason: 3=DEAUTH_LEAVING) [103335.774104] PM: suspend entry (deep) [103335.792352] Filesystems sync: 0.018 seconds [103335.795147] Freezing user space processes [103335.796951] Freezing user space processes completed (elapsed 0.001 seconds) [103335.796955] OOM killer disabled. [103335.796956] Freezing remaining freezable tasks [103335.798553] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [103335.798604] printk: Suspending console(s) (use no_console_suspend to debug) [103336.395984] ACPI: EC: interrupt blocked [103336.424493] ACPI: PM: Preparing to enter system sleep state S3 [103336.437222] ACPI: EC: event blocked [103336.437227] ACPI: EC: EC stopped [103336.437229] ACPI: PM: Saving platform NVS memory [103336.440526] Disabling non-boot CPUs ... [103336.442758] smpboot: CPU 3 is now offline [103336.446267] smpboot: CPU 2 is now offline [103336.450740] smpboot: CPU 1 is now offline [103336.460375] ACPI: PM: Low-level resume complete [103336.460444] ACPI: EC: EC started [103336.460445] ACPI: PM: Restoring platform NVS memory [103336.462920] Enabling non-boot CPUs ... [103336.462957] smpboot: Booting Node 0 Processor 1 APIC 0x2 [103336.464075] CPU1 is up [103336.464101] smpboot: Booting Node 0 Processor 2 APIC 0x1 [103336.465174] CPU2 is up [103336.465202] smpboot: Booting Node 0 Processor 3 APIC 0x3 [103336.466185] CPU3 is up [103336.470077] ACPI: PM: Waking up from system sleep state S3 [103336.515621] ACPI: EC: interrupt unblocked [103336.533797] ACPI: EC: event unblocked [103336.551889] nvme nvme0: 4/0/0 default/read/poll queues [103336.783857] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [103336.815802] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [103336.981897] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [103337.039831] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [103337.299835] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [103337.439979] OOM killer enabled. [103337.439981] Restarting tasks ... done. [103337.443141] random: crng reseeded on system resumption [103337.527580] PM: suspend exit [103337.648339] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [103337.648349] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [103337.971829] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [103338.007626] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [103338.034081] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [103345.605709] wlp58s0: authenticate with e4:37:9f:33:9d:8b (local address=9c:b6:d0:d1:6a:b1) [103345.605755] wlp58s0: send auth to e4:37:9f:33:9d:8b (try 1/3) [103345.608038] wlp58s0: authenticated [103345.611818] wlp58s0: associate with e4:37:9f:33:9d:8b (try 1/3) [103345.619029] wlp58s0: RX AssocResp from e4:37:9f:33:9d:8b (capab=0x1111 status=0 aid=10) [103345.622760] wlp58s0: associated [103345.638783] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:37:9f:33:9d:8b [103369.596104] wlp58s0: deauthenticating from e4:37:9f:33:9d:8b by local choice (Reason: 3=DEAUTH_LEAVING) [103400.138490] PM: suspend entry (deep) [103400.154005] Filesystems sync: 0.015 seconds [103400.170587] Freezing user space processes [103400.173699] Freezing user space processes completed (elapsed 0.003 seconds) [103400.173722] OOM killer disabled. [103400.173724] Freezing remaining freezable tasks [103400.740061] Freezing remaining freezable tasks completed (elapsed 0.566 seconds) [103400.740214] printk: Suspending console(s) (use no_console_suspend to debug) [103401.316883] ACPI: EC: interrupt blocked [103401.351987] ACPI: PM: Preparing to enter system sleep state S3 [103401.365351] ACPI: EC: event blocked [103401.365355] ACPI: EC: EC stopped [103401.365357] ACPI: PM: Saving platform NVS memory [103401.369740] Disabling non-boot CPUs ... [103401.372463] smpboot: CPU 3 is now offline [103401.378177] smpboot: CPU 2 is now offline [103401.384016] smpboot: CPU 1 is now offline [103401.392725] ACPI: PM: Low-level resume complete [103401.392770] ACPI: EC: EC started [103401.392771] ACPI: PM: Restoring platform NVS memory [103401.394663] Enabling non-boot CPUs ... [103401.394689] smpboot: Booting Node 0 Processor 1 APIC 0x2 [103401.395440] CPU1 is up [103401.395457] smpboot: Booting Node 0 Processor 2 APIC 0x1 [103401.396250] CPU2 is up [103401.396266] smpboot: Booting Node 0 Processor 3 APIC 0x3 [103401.397006] CPU3 is up [103401.399817] ACPI: PM: Waking up from system sleep state S3 [103401.432040] ACPI: EC: interrupt unblocked [103401.448160] ACPI: EC: event unblocked [103401.460471] nvme nvme0: 4/0/0 default/read/poll queues [103401.683985] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [103401.704045] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [103401.964027] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [103402.220038] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [103402.363367] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [103402.363374] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [103402.364361] OOM killer enabled. [103402.364364] Restarting tasks ... done. [103402.366356] random: crng reseeded on system resumption [103402.499159] PM: suspend exit [103402.728091] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [103402.757878] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [103402.914430] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [103408.175408] wlp58s0: authenticate with e4:37:9f:33:9d:8b (local address=9c:b6:d0:d1:6a:b1) [103408.175423] wlp58s0: send auth to e4:37:9f:33:9d:8b (try 1/3) [103408.178722] wlp58s0: authenticated [103408.183995] wlp58s0: associate with e4:37:9f:33:9d:8b (try 1/3) [103408.193960] wlp58s0: RX AssocResp from e4:37:9f:33:9d:8b (capab=0x1111 status=0 aid=10) [103408.198201] wlp58s0: associated [103408.241435] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:37:9f:33:9d:8b [106335.692008] ath10k_pci 0000:3a:00.0: firmware crashed! (guid b6eb8244-0e48-4785-8247-901e833ed59a) [106335.692036] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [106335.692050] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [106335.692387] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2 [106335.692742] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 [106335.692750] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [106335.702933] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16 [106335.702945] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16 [106335.702955] ath10k_pci 0000:3a:00.0: Copy Engine register dump: [106335.702970] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3 [106335.702989] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 20 20 65 66 [106335.703005] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 5 3 65 66 [106335.703020] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 1 1 3 1 [106335.703034] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 4665 4663 92 28 [106335.703049] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0 [106335.703064] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 31 31 18 18 [106335.703078] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0 [106335.806418] ieee80211 phy0: Hardware restart was requested [106336.116606] ath10k_pci 0000:3a:00.0: device successfully recovered [106416.467122] wlp58s0: deauthenticating from e4:37:9f:33:9d:8b by local choice (Reason: 3=DEAUTH_LEAVING) [106428.212833] wlp58s0: authenticate with e4:37:9f:2a:94:4b (local address=9c:b6:d0:d1:6a:b1) [106428.212851] wlp58s0: send auth to e4:37:9f:2a:94:4b (try 1/3) [106428.214725] wlp58s0: authenticated [106428.218338] wlp58s0: associate with e4:37:9f:2a:94:4b (try 1/3) [106428.228606] wlp58s0: RX AssocResp from e4:37:9f:2a:94:4b (capab=0x1111 status=0 aid=2) [106428.231724] wlp58s0: associated [106428.274672] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e4:37:9f:2a:94:4b [106534.943371] wlp58s0: deauthenticating from e4:37:9f:2a:94:4b by local choice (Reason: 3=DEAUTH_LEAVING) [106536.490629] PM: suspend entry (deep) [106536.500944] Filesystems sync: 0.010 seconds [106536.503547] Freezing user space processes [106536.505360] Freezing user space processes completed (elapsed 0.001 seconds) [106536.505364] OOM killer disabled. [106536.505365] Freezing remaining freezable tasks [106536.506871] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [106536.506923] printk: Suspending console(s) (use no_console_suspend to debug) [106537.123973] ACPI: EC: interrupt blocked [106537.150465] ACPI: PM: Preparing to enter system sleep state S3 [106537.160543] ACPI: EC: event blocked [106537.160548] ACPI: EC: EC stopped [106537.160550] ACPI: PM: Saving platform NVS memory [106537.163863] Disabling non-boot CPUs ... [106537.165983] smpboot: CPU 3 is now offline [106537.170244] smpboot: CPU 2 is now offline [106537.173013] smpboot: CPU 1 is now offline [106537.181638] ACPI: PM: Low-level resume complete [106537.181685] ACPI: EC: EC started [106537.181686] ACPI: PM: Restoring platform NVS memory [106537.183586] Enabling non-boot CPUs ... [106537.183611] smpboot: Booting Node 0 Processor 1 APIC 0x2 [106537.184352] CPU1 is up [106537.184369] smpboot: Booting Node 0 Processor 2 APIC 0x1 [106537.185158] CPU2 is up [106537.185173] smpboot: Booting Node 0 Processor 3 APIC 0x3 [106537.185925] CPU3 is up [106537.188733] ACPI: PM: Waking up from system sleep state S3 [106537.218524] ACPI: EC: interrupt unblocked [106537.232944] ACPI: EC: event unblocked [106537.246962] nvme nvme0: 4/0/0 default/read/poll queues [106537.465441] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [106537.485491] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [106537.635376] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [106537.745467] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [106538.001485] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [106538.142505] OOM killer enabled. [106538.142509] Restarting tasks ... done. [106538.144934] random: crng reseeded on system resumption [106538.260066] PM: suspend exit [106538.347332] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [106538.347337] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [106538.706060] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [106538.731208] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [106538.797789] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [106543.628898] wlp58s0: authenticate with e4:38:7e:4e:ff:ab (local address=9c:b6:d0:d1:6a:b1) [106543.628905] wlp58s0: send auth to e4:38:7e:4e:ff:ab (try 1/3) [106543.630774] wlp58s0: authenticated [106543.633407] wlp58s0: associate with e4:38:7e:4e:ff:ab (try 1/3) [106543.640297] wlp58s0: RX AssocResp from e4:38:7e:4e:ff:ab (capab=0x1111 status=0 aid=12) [106543.643746] wlp58s0: associated [106543.645149] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:38:7e:4e:ff:ab