| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250324-rock5bp-for-upstream-v1-4-6217edf15b19@kernel.org>
Date: Mon, 24 Mar 2025 18:04:25 +0100
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Heiko Stuebner <heiko@...ech.de>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Sebastian Reichel <sebastian.reichel@...labora.com>
Subject: [PATCH 4/5] arm64: dts: rockchip: add Rock 5B+
Add ROCK 5B+, which is an improved version of the ROCK 5B with the
following changes:
* Memory LPDDR4X -> LPDDR5
* HDMI input connector size
* eMMC socket -> onboard
* M.2 E-Key is replaced by onboard RTL8852BE WLAN/BT
* M.2 M-Key 1x4 lanes is replaced by 2x2 lanes
* Added M.2 B-Key for USB connected WWAN modules (untested)
* Add second camera port (not yet supported in upstream Linux)
* Add dedicated USB-C port for device power (no impact in DT;
the existing port has not been changed and the new port is
handled by CH224D standalone chip)
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588-rock-5b-plus.dts | 113 +++++++++++++++++++++
2 files changed, 114 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 3e8771ef69ba1c1428117cc2ae29b84e13523e21..6525329fcf060aeb89382d184ca4c6c5c1d07088 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -164,6 +164,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
new file mode 100644
index 0000000000000000000000000000000000000000..74c7b6502e4dda4b774f43c704ebaee350703c0d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588-rock-5b.dtsi"
+
+/ {
+ model = "Radxa ROCK 5B+";
+ compatible = "radxa,rock-5b-plus", "rockchip,rk3588";
+
+ rfkill-wwan {
+ compatible = "rfkill-gpio";
+ label = "rfkill-m2-wwan";
+ radio-type = "wwan";
+ shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc3v3_4g: regulator-vcc3v3-4g {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ /* pinctrl for the GPIO is requested by vcc3v3_pcie2x1l0 */
+ regulator-name = "vcc3v3_4g";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_wwan_pwr: regulator-vcc3v3-wwan {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wwan_power_en>;
+ regulator-name = "vcc3v3_wwan_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_4g>;
+ };
+};
+
+&gpio0 {
+ wwan-disable2-n-hog {
+ gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "M.2 B-key W_DISABLE2#";
+ gpio-hog;
+ };
+};
+
+&gpio2 {
+ wwan-reset-n-hog {
+ gpios = <RK_PB3 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "M.2 B-key RESET#";
+ gpio-hog;
+ };
+
+ wwan-wake-n-hog {
+ gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "M.2 B-key WoWWAN#";
+ gpio-hog;
+ };
+};
+
+&pcie30phy {
+ data-lanes = <1 1 2 2>;
+};
+
+&pcie3x2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3x2_rst>;
+ reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie30>;
+ status = "okay";
+};
+
+&pcie3x4 {
+ num-lanes = <2>;
+};
+
+&pinctrl {
+ wwan {
+ wwan_power_en: wwan-pwr-en {
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie3 {
+ pcie3x2_rst: pcie3x2-rst {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&vcc5v0_host {
+ enable-active-high;
+ gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+};
--
2.47.2
Powered by blists - more mailing lists