[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ys56uezoe7uuhsvtejnptjuluvphpidg5tzx2d4x3bi6pan7aa@en3rx3llns5s>
Date: Mon, 24 Mar 2025 13:36:25 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Praveenkumar I <quic_ipkumar@...cinc.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
george.moussalem@...look.com, Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Nitheesh Sekar <quic_nsekar@...cinc.com>,
Varadarajan Narayanan <quic_varada@...cinc.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
20250317100029.881286-2-quic_varada@...cinc.com,
Sricharan R <quic_srichara@...cinc.com>
Subject: Re: [PATCH v6 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes
On Mon, Mar 24, 2025 at 04:48:34PM +0530, Praveenkumar I wrote:
>
>
> On 3/24/2025 1:26 PM, Manivannan Sadhasivam wrote:
> > On Fri, Mar 21, 2025 at 04:14:43PM +0400, George Moussalem via B4 Relay wrote:
> > > From: Nitheesh Sekar<quic_nsekar@...cinc.com>
> > >
> > > Add phy and controller nodes for a 2-lane Gen2 and
> > Controller is Gen 3 capable but you are limiting it to Gen 2.
> >
> > > a 1-lane Gen2 PCIe bus. IPQ5018 has 8 MSI SPI interrupts and
> > > one global interrupt.
> > >
> > > Signed-off-by: Nitheesh Sekar<quic_nsekar@...cinc.com>
> > > Signed-off-by: Sricharan R<quic_srichara@...cinc.com>
> > > Signed-off-by: George Moussalem<george.moussalem@...look.com>
> > One comment below. With that addressed,
> >
> > Reviewed-by: Manivannan Sadhasivam<manivannan.sadhasivam@...aro.org>
> >
> > > ---
> > > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 234 +++++++++++++++++++++++++++++++++-
> > > 1 file changed, 232 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > > index 8914f2ef0bc4..d08034b57e80 100644
> > > --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > > @@ -147,6 +147,40 @@ usbphy0: phy@...00 {
> > > status = "disabled";
> > > };
> > > + pcie1_phy: phy@...00{
> > > + compatible = "qcom,ipq5018-uniphy-pcie-phy";
> > > + reg = <0x0007e000 0x800>;
> > > +
> > > + clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
> > > +
> > > + resets = <&gcc GCC_PCIE1_PHY_BCR>,
> > > + <&gcc GCC_PCIE1PHY_PHY_BCR>;
> > > +
> > > + #clock-cells = <0>;
> > > + #phy-cells = <0>;
> > > +
> > > + num-lanes = <1>;
> > > +
> > > + status = "disabled";
> > > + };
> > > +
> > > + pcie0_phy: phy@...00{
> > > + compatible = "qcom,ipq5018-uniphy-pcie-phy";
> > > + reg = <0x00086000 0x800>;
> > > +
> > > + clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
> > > +
> > > + resets = <&gcc GCC_PCIE0_PHY_BCR>,
> > > + <&gcc GCC_PCIE0PHY_PHY_BCR>;
> > > +
> > > + #clock-cells = <0>;
> > > + #phy-cells = <0>;
> > > +
> > > + num-lanes = <2>;
> > > +
> > > + status = "disabled";
> > > + };
> > > +
> > > tlmm: pinctrl@...0000 {
> > > compatible = "qcom,ipq5018-tlmm";
> > > reg = <0x01000000 0x300000>;
> > > @@ -170,8 +204,8 @@ gcc: clock-controller@...0000 {
> > > reg = <0x01800000 0x80000>;
> > > clocks = <&xo_board_clk>,
> > > <&sleep_clk>,
> > > - <0>,
> > > - <0>,
> > > + <&pcie0_phy>,
> > > + <&pcie1_phy>,
> > > <0>,
> > > <0>,
> > > <0>,
> > > @@ -387,6 +421,202 @@ frame@...8000 {
> > > status = "disabled";
> > > };
> > > };
> > > +
> > > + pcie1: pcie@...00000 {
> > > + compatible = "qcom,pcie-ipq5018";
> > > + reg = <0x80000000 0xf1d>,
> > > + <0x80000f20 0xa8>,
> > > + <0x80001000 0x1000>,
> > > + <0x00078000 0x3000>,
> > > + <0x80100000 0x1000>,
> > > + <0x0007b000 0x1000>;
> > > + reg-names = "dbi",
> > > + "elbi",
> > > + "atu",
> > > + "parf",
> > > + "config",
> > > + "mhi";
> > > + device_type = "pci";
> > > + linux,pci-domain = <0>;
> > > + bus-range = <0x00 0xff>;
> > > + num-lanes = <1>;
> > > + max-link-speed = <2>;
> > This still needs some justification. If Qcom folks didn't reply, atleast move
> > this to board dts with a comment saying that the link is not coming up with
> > Gen3.
> >
> > - Mani
> The IPQ5018 PCIe controller can support Gen3, but the PCIe phy is limited
> Gen2 and does not supported Gen3.
> Hence, it is restricted using the DTSI property.
Ideally this needs to be negotiated between the PCIe host and PHY
drivers.
--
With best wishes
Dmitry
Powered by blists - more mailing lists