[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKXuJqiwWzC9Zhnnujq+EugJw75EqYL=AmDUUMs8LHOnbBNsyw@mail.gmail.com>
Date: Mon, 24 Mar 2025 10:38:53 -0500
From: Steev Klimaszewski <steev@...i.org>
To: "Peng Fan (OSS)" <peng.fan@....nxp.com>
Cc: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>,
Linus Walleij <linus.walleij@...aro.org>, Bartosz Golaszewski <brgl@...ev.pl>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>, Johan Hovold <johan@...nel.org>,
linux-sound@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Peng Fan <peng.fan@....com>
Subject: Re: [PATCH v2 2/3] ASoC: codec: wcd938x: Convert to GPIO descriptors
Hi Peng,
On Mon, Mar 24, 2025 at 6:52 AM Peng Fan (OSS) <peng.fan@....nxp.com> wrote:
>
> From: Peng Fan <peng.fan@....com>
>
> of_gpio.h is deprecated, update the driver to use GPIO descriptors.
> - Use dev_gpiod_get to get GPIO descriptor.
> - Use gpiod_set_value to configure output value.
>
> With legacy of_gpio API, the driver set gpio value 0 to assert reset,
> and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
> DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
> output low, set value 0 means output high with gpiod API.
>
> The in-tree DTS files have the right polarity set up already so we
> can expect this to "just work".
>
> Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
> Signed-off-by: Peng Fan <peng.fan@....com>
> ---
> sound/soc/codecs/wcd938x.c | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
> index 1ae498c323912ed799dcc033e7777936d90c9284..955a0d3a77d7cb45932faa0c7a6f5060232d33b4 100644
> --- a/sound/soc/codecs/wcd938x.c
> +++ b/sound/soc/codecs/wcd938x.c
> @@ -11,7 +11,6 @@
> #include <linux/pm_runtime.h>
> #include <linux/component.h>
> #include <sound/tlv.h>
> -#include <linux/of_gpio.h>
> #include <linux/of.h>
> #include <sound/jack.h>
> #include <sound/pcm.h>
> @@ -171,7 +170,7 @@ struct wcd938x_priv {
> int flyback_cur_det_disable;
> int ear_rx_path;
> int variant;
> - int reset_gpio;
> + struct gpio_desc *reset_gpio;
> struct gpio_desc *us_euro_gpio;
> u32 micb1_mv;
> u32 micb2_mv;
> @@ -3251,9 +3250,9 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
> struct wcd_mbhc_config *cfg = &wcd938x->mbhc_cfg;
> int ret;
>
> - wcd938x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0);
> - if (wcd938x->reset_gpio < 0)
> - return dev_err_probe(dev, wcd938x->reset_gpio,
> + wcd938x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(wcd938x->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(wcd938x->reset_gpio),
> "Failed to get reset gpio\n");
>
> wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro",
> @@ -3297,10 +3296,10 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
>
> static int wcd938x_reset(struct wcd938x_priv *wcd938x)
> {
> - gpio_direction_output(wcd938x->reset_gpio, 0);
> + gpiod_set_value(wcd938x->reset_gpio, 1);
> /* 20us sleep required after pulling the reset gpio to LOW */
> usleep_range(20, 30);
> - gpio_set_value(wcd938x->reset_gpio, 1);
> + gpiod_set_value(wcd938x->reset_gpio, 0);
> /* 20us sleep required after pulling the reset gpio to HIGH */
> usleep_range(20, 30);
>
>
> --
> 2.37.1
>
I can verify that with v2 applied, I do still have working audio on
the Thinkpad X13s. Apologies for not replying earlier, it was
unfortunately my night time. For the record though, I do not use the
firmware dtb files, but explicitly list the kernel that I am using
and/or testing to be used on each boot.
Tested-by: Steev Klimaszewski <steev@...i.org>
Thanks!
-- steev
Powered by blists - more mailing lists