[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7a0e7b48-6c08-abbe-7c23-a7e1c746351c@oss.qualcomm.com>
Date: Tue, 25 Mar 2025 10:11:42 +0530
From: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
To: Rob Herring <robh@...nel.org>
Cc: Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski
<krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
cros-qcom-dts-watchers@...omium.org, linux-arm-msm@...r.kernel.org,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, quic_vbadigan@...cinc.com,
quic_mrana@...cinc.com
Subject: Re: [PATCH 1/3] dt-bindings: PCI: qcom: Move phy, wake & reset gpio's
to root port
On 3/24/2025 10:09 PM, Rob Herring wrote:
> On Sat, Mar 22, 2025 at 08:30:43AM +0530, Krishna Chaitanya Chundru wrote:
>> Move the phy, phy-names, wake-gpio's to the pcie root port node instead of
>> the bridge node, as agreed upon in multiple places one instance is[1].
>
> You aren't really moving them except in the example. This is an ABI
> break for sc7280. Is anyone going to care?
>
> You need to deprecate the properties in the old location.
>
Hi Rob,
we are actually moving these properties in the driver also
patch 3
https://lore.kernel.org/linux-arm-msm/20250322-perst-v1-3-e5e4da74a204@oss.qualcomm.com/T/#m168bec3f5d218a7f0c18293ff7380cba07a12e0e
is the driver change in this series.
>> Update the qcom,pcie-common.yaml to include the phy, phy-names, and
>> wake-gpios properties in the root port node. There is already reset-gpio
>> defined for PERST# in pci-bus-common.yaml, start using that property
>> instead of perst-gpio.
>>
>> For backward compatibility, do not remove any existing properties in the
>> bridge node.
>>
>> [1] https://lore.kernel.org/linux-pci/20241211192014.GA3302752@bhelgaas/
>>
>> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
>> ---
>> .../devicetree/bindings/pci/qcom,pcie-common.yaml | 22 ++++++++++++++++++++++
>> .../devicetree/bindings/pci/qcom,pcie-sc7280.yaml | 18 ++++++++++++++----
>> 2 files changed, 36 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
>> index 0480c58f7d99..258c21c01c72 100644
>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
>> @@ -85,6 +85,28 @@ properties:
>> opp-table:
>> type: object
>>
>> +patternProperties:
>> + "^pcie@":
>> + type: object
>> + $ref: /schemas/pci/pci-pci-bridge.yaml#
>> +
>> + properties:
>> + reg:
>> + maxItems: 1
>> +
>> + phys:
>> + maxItems: 1
>> +
>> + phy-names:
>> + items:
>> + - const: pciephy
>
> Just drop phy-names in the new location. It's pointless especially when
> foo-names is just "${module}foo".
ack
- Krishna Chaitanya.
>
>> +
>> + wake-gpios:
>> + description: GPIO controlled connection to WAKE# signal
>> + maxItems: 1
>> +
>> + unevaluatedProperties: false
>> +
>> required:
>> - reg
>> - reg-names
Powered by blists - more mailing lists