lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250325115736.1732721-3-lukma@denx.de>
Date: Tue, 25 Mar 2025 12:57:33 +0100
From: Lukasz Majewski <lukma@...x.de>
To: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Paolo Abeni <pabeni@...hat.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Eric Dumazet <edumazet@...gle.com>,
	davem@...emloft.net,
	Andrew Lunn <andrew+netdev@...n.ch>
Cc: Pengutronix Kernel Team <kernel@...gutronix.de>,
	Fabio Estevam <festevam@...il.com>,
	devicetree@...r.kernel.org,
	imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	Richard Cochran <richardcochran@...il.com>,
	netdev@...r.kernel.org,
	Maxime Chevallier <maxime.chevallier@...tlin.com>,
	Lukasz Majewski <lukma@...x.de>
Subject: [PATCH 2/5] dt-bindings: net: Add MTIP L2 switch description (fec,mtip-switch.yaml)

This patch provides description of the MTIP L2 switch available in some
NXP's SOCs - imx287, vf610.

Signed-off-by: Lukasz Majewski <lukma@...x.de>
---
 .../bindings/net/fec,mtip-switch.yaml         | 160 ++++++++++++++++++
 1 file changed, 160 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/fec,mtip-switch.yaml

diff --git a/Documentation/devicetree/bindings/net/fec,mtip-switch.yaml b/Documentation/devicetree/bindings/net/fec,mtip-switch.yaml
new file mode 100644
index 000000000000..cd85385e0f79
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fec,mtip-switch.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,mtip-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MTIP Level 2 (L2) switch
+
+maintainers:
+  - Lukasz Majewski <lukma@...x.de>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+	  - imx287-mtip-switch
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  clocks:
+    maxItems: 4
+    description:
+      The "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing.
+      The "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock.
+      The "ptp"(option), for IEEE1588 timer clock that requires the clock.
+      The "enet_out"(option), output clock for external device, like supply clock
+      for PHY. The clock is required if PHY clock source from SOC.
+
+  clock-names:
+    minItems: 4
+    maxItems: 4
+    items:
+      enum:
+	- ipg
+	- ahb
+	- ptp
+	- enet_out
+
+  phy-supply:
+    description:
+      Regulator that powers the Ethernet PHY.
+
+  phy-reset-gpios:
+    deprecated: true
+    description:
+      Should specify the gpio for phy reset.
+
+  phy-reset-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Reset duration in milliseconds.  Should present only if property
+      "phy-reset-gpios" is available.  Missing the property will have the
+      duration be 1 millisecond.  Numbers greater than 1000 are invalid
+      and 1 millisecond will be used instead.
+
+  phy-reset-post-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay
+      milliseconds will be observed after the phy-reset-gpios has been toggled.
+      Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms.
+      Other delays are invalid.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Specifies the mdio bus in the FEC, used as a container for phy nodes.
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+	$ref: /schemas/net/ethernet-switch-controller.yaml#
+	unevaluatedProperties: false
+
+	properties:
+	  reg:
+	    description: Switch port number
+
+	required:
+	  - reg
+	  - phy-mode
+	  - phy-handle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mdio
+  - ethernet-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    switch@...f0000 {
+	compatible = "fsl,imx287-mtip-switch";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac1_pins_a>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <10>;
+	interrupts = <100>, <101>, <102>;
+	clocks = <&clks 57>, <&clks 57>, <&clks 64>, <&clks 35>;
+	clock-names = "ipg", "ahb", "enet_out", "ptp";
+	status = "okay";
+
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mtip_port1: port@1 {
+			reg = <1>;
+			label = "lan0";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			phy-mode = "rmii";
+			phy-handle = <&ethphy0>;
+		};
+
+		mtip_port2: port@2 {
+			reg = <2>;
+			label = "lan1";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			phy-mode = "rmii";
+			phy-handle = <&ethphy1>;
+		};
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			smsc,disable-energy-detect;
+			/* Both PHYs (i.e. 0,1) have the same, single GPIO, */
+			/* line to handle both, their interrupts (AND'ed) */
+			interrupt-parent = <&gpio4>;
+			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			smsc,disable-energy-detect;
+			interrupt-parent = <&gpio4>;
+			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+    };
-- 
2.39.5


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ