[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250325131507.692804cd@wsk>
Date: Tue, 25 Mar 2025 13:15:07 +0100
From: Lukasz Majewski <lukma@...x.de>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Sascha
Hauer <s.hauer@...gutronix.de>, Paolo Abeni <pabeni@...hat.com>, Jakub
Kicinski <kuba@...nel.org>, Eric Dumazet <edumazet@...gle.com>,
davem@...emloft.net, Andrew Lunn <andrew+netdev@...n.ch>, Pengutronix
Kernel Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>,
devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, Richard
Cochran <richardcochran@...il.com>, netdev@...r.kernel.org, Maxime
Chevallier <maxime.chevallier@...tlin.com>
Subject: Re: [PATCH 2/5] dt-bindings: net: Add MTIP L2 switch description
(fec,mtip-switch.yaml)
Hi Krzysztof,
> On 25/03/2025 12:57, Lukasz Majewski wrote:
> > This patch provides description of the MTIP L2 switch available in
> > some NXP's SOCs - imx287, vf610.
> >
> > Signed-off-by: Lukasz Majewski <lukma@...x.de>
> > ---
> > .../bindings/net/fec,mtip-switch.yaml | 160
> > ++++++++++++++++++
>
> Use compatible as filename.
I've followed the fsl,fec.yaml as an example. This file has description
for all the device tree sources from fec_main.c
I've considered adding the full name - e.g. fec,imx287-mtip-switch.yaml
but this driver could (and probably will) be extended to vf610.
So what is the advised way to go?
>
> > 1 file changed, 160 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/net/fec,mtip-switch.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/net/fec,mtip-switch.yaml
> > b/Documentation/devicetree/bindings/net/fec,mtip-switch.yaml new
> > file mode 100644 index 000000000000..cd85385e0f79 --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/fec,mtip-switch.yaml
> > @@ -0,0 +1,160 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/fsl,mtip-switch.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Freescale MTIP Level 2 (L2) switch
> > +
> > +maintainers:
> > + - Lukasz Majewski <lukma@...x.de>
> > +
>
> description?
Ok.
>
> > +allOf:
> > + - $ref: ethernet-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + oneOf:
>
> Drop, you have only one variant.
Ok, for imx287 this can be dropped, and then extended with vf610.
>
> > + - enum:
> > + - imx287-mtip-switch
>
> This wasn't tested. Except whitespace errors, above compatible does
> not have format of compatible. Please look at other NXP bindings.
>
> Missing blank line.
>
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 3
>
> Need to list items instead.
>
> > +
> > + clocks:
> > + maxItems: 4
> > + description:
> > + The "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for
> > register accessing.
> > + The "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock.
> > + The "ptp"(option), for IEEE1588 timer clock that requires
> > the clock.
> > + The "enet_out"(option), output clock for external device,
> > like supply clock
> > + for PHY. The clock is required if PHY clock source from SOC.
> >
>
> Same problems. This binding does not look at all as any other
> binding. I finish review here, but the code has similar trivial
> issues all the way, including incorrect indentation. Start from well
> reviewed existing binding or example-schema.
As I've stated above - this code is reduced copy of fsl,fec.yaml...
>
> Best regards,
> Krzysztof
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists