[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250326161251.7233-1-v.shevtsov@mt-integration.ru>
Date: Wed, 26 Mar 2025 21:12:45 +0500
From: Vitaliy Shevtsov <v.shevtsov@...integration.ru>
To: Vladimir Oltean <vladimir.oltean@....com>
CC: Vitaliy Shevtsov <v.shevtsov@...integration.ru>, Claudiu Manoil
<claudiu.manoil@....com>, Alexandre Belloni <alexandre.belloni@...tlin.com>,
<UNGLinuxDriver@...rochip.com>, Andrew Lunn <andrew@...n.ch>, "David S.
Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub
Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<lvc-project@...uxtesting.org>
Subject: [PATCH] net: dsa: felix: check felix_cpu_port_for_conduit() for failure
felix_cpu_port_for_conduit() can return a negative value in case of failure
and then it will be used as a port index causing buffer underflow. This can
happen if a bonding interface in 802.1Q mode has no ports. This is unlikely
to happen because the underlying driver handles IFF_TEAM, IFF_MASTER,
IFF_BONDING bits and ports populating correctly, it is still better to
check this for correctness if somehow it fails.
Check if cpu_port is non-negative before using it as an index.
Errors from change_conduit() are already handled and no additional changes
are required.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@...integration.ru>
---
drivers/net/dsa/ocelot/felix.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 0a4e682a55ef..1495f8e21f90 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -523,6 +523,7 @@ static int felix_tag_npi_change_conduit(struct dsa_switch *ds, int port,
{
struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
struct ocelot *ocelot = ds->priv;
+ int cpu;
if (netif_is_lag_master(conduit)) {
NL_SET_ERR_MSG_MOD(extack,
@@ -546,7 +547,12 @@ static int felix_tag_npi_change_conduit(struct dsa_switch *ds, int port,
}
felix_npi_port_deinit(ocelot, ocelot->npi);
- felix_npi_port_init(ocelot, felix_cpu_port_for_conduit(ds, conduit));
+ cpu = felix_cpu_port_for_conduit(ds, conduit);
+ if (cpu < 0) {
+ dev_err(ds->dev, "Cpu port for conduit not found\n");
+ return -EINVAL;
+ }
+ felix_npi_port_init(ocelot, cpu);
return 0;
}
@@ -658,6 +664,11 @@ static int felix_tag_8021q_change_conduit(struct dsa_switch *ds, int port,
int cpu = felix_cpu_port_for_conduit(ds, conduit);
struct ocelot *ocelot = ds->priv;
+ if (cpu < 0) {
+ dev_err(ds->dev, "Cpu port for conduit not found\n");
+ return -EINVAL;
+ }
+
ocelot_port_unassign_dsa_8021q_cpu(ocelot, port);
ocelot_port_assign_dsa_8021q_cpu(ocelot, port, cpu);
--
2.48.1
Powered by blists - more mailing lists