[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cf525617-b895-4d58-8455-a5c7fa9bbeab@lunn.ch>
Date: Thu, 27 Mar 2025 15:25:38 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Martyn Welch <martyn.welch@...labora.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, kernel@...labora.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2] arm64: dts: imx8mp: Add device tree for Nitrogen8M
Plus ENC Carrier Board
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
> @@ -0,0 +1,415 @@
> +&eqos {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eqos>;
> + phy-handle = <ðphy0>;
> + phy-mode = "rgmii-id";
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@4 {
Just conformation, the PHY is on the SOM? Are the magnetics and RJ45
socket on the SOM, or the carrier?
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <4>;
> + eee-broken-1000t;
> +#if 0
> + interrupts-extended = <&gpio3 2 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>;
> +#endif
Please don't have disabled properties.
> + reg-mask = <0x90>;
What does this property do? It is not one i recognise.
Andrew
Powered by blists - more mailing lists