[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <45c6cb9d-b329-4b4c-a480-08110a546fb6@lunn.ch>
Date: Fri, 28 Mar 2025 19:23:54 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Lukasz Majewski <lukma@...x.de>
Cc: Andrew Lunn <andrew+netdev@...n.ch>, davem@...emloft.net,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Richard Cochran <richardcochran@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 1/4] dt-bindings: net: Add MTIP L2 switch description
> + ethphy0: ethernet-phy@0 {
> + reg = <0>;
> + smsc,disable-energy-detect;
> + /* Both PHYs (i.e. 0,1) have the same, single GPIO, */
> + /* line to handle both, their interrupts (AND'ed) */
> + interrupt-parent = <&gpio4>;
> + interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
Shared interrupts cannot be edge. They are level, so that either can
hold the interrupt active until it is cleared.
Also, PHY interrupts in general are level, because there are multiple
interrupt sources within the PHY, and you need to clear them all
before the interrupt is released.
Andrew
Powered by blists - more mailing lists