linux-kernel - [PATCH v2 0/7] clk: spacemit: add K1 reset support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250328210233.1077035-1-elder@riscstar.com>
Date: Fri, 28 Mar 2025 16:02:25 -0500
From: Alex Elder <elder@...cstar.com>
To: p.zabel@...gutronix.de,
	mturquette@...libre.com,
	sboyd@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	dlan@...too.org
Cc: heylenay@....org,
	guodong@...cstar.com,
	paul.walmsley@...ive.com,
	palmer@...belt.com,
	aou@...s.berkeley.edu,
	spacemit@...ts.linux.dev,
	devicetree@...r.kernel.org,
	linux-clk@...r.kernel.org,
	linux-riscv@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2 0/7] clk: spacemit: add K1 reset support

This series adds reset controller support for the SpacemiT K1 SoC.
It is based on Linux v6.14.  This version of the series is updated
in reponse to review feedback from the initial version:
  https://lore.kernel.org/lkml/20250321151831.623575-1-elder@riscstar.com/

As before, this version is built upon the clock controller driver that
Haylen Chu currently has out for review (currently at v5):
  https://lore.kernel.org/lkml/20250306175750.22480-2-heylenay@4d2.org/

It also depends on two commits that will land in v6.15: 5728c92ae1123
("mfd: syscon: Restore device_node_to_regmap() for non-syscon nodes")
and 7ff4faba63571 ("pinctrl: spacemit: enable config option").

The basic content of the patches has not changed since last time, so
I won't repeat the explantion of each here.

All of these patches are available here:
  https://github.com/riscstar/linux/tree/outgoing/reset-v2

Since last time:
  - Added Rob's Reviewed-by tag on the first patch
  - Renamed the of_match_data data type (and one or two other symbols) to
    use "spacemit" rather than "k1".
  - Replaced the abbreviated "rst" or "RST" in names of newly-defined
    sympols with "reset" or "RESET" respectively.
  - Eliminated rcdev_to_controller(), which was only used once.
  - Changed a function that unsafely did a read/modify/write of a register
    to use regmap_update_bits() instead as suggested by Haylen.
  - Eliminated a null check for a pointer known to be non-null.
  - Reordered the assignment of reset controller device fields.
  - Added a "sentinel" comment as requested by Yixun.
  - Updated to be based on Linux v6.14 final.

Note that I did *not* change anything related to the "remote CPU" (RCPU
and RCPU2) resets (and clocks).

					-Alex

Alex Elder (7):
  dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
  clk: spacemit: define struct spacemit_ccu_data
  clk: spacemit: add reset controller support
  clk: spacemit: define existing syscon resets
  clk: spacemit: make clocks optional
  clk: spacemit: define new syscons with only resets
  riscv: dts: spacemit: add reset support for the K1 SoC

 .../soc/spacemit/spacemit,k1-syscon.yaml      |  13 +-
 arch/riscv/boot/dts/spacemit/k1.dtsi          |  18 +
 drivers/clk/spacemit/ccu-k1.c                 | 380 +++++++++++++++++-
 include/dt-bindings/clock/spacemit,k1-ccu.h   | 128 ++++++
 4 files changed, 521 insertions(+), 18 deletions(-)

-- 
2.45.2