linux-kernel - [PATCH 5/5] scsi: hisi_sas: Wait until eh is recovered

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250329073236.2300582-6-liyihang9@huawei.com>
Date: Sat, 29 Mar 2025 15:32:36 +0800
From: Yihang Li <liyihang9@...wei.com>
To: <martin.petersen@...cle.com>, <James.Bottomley@...senPartnership.com>
CC: <linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linuxarm@...wei.com>, <liyihang9@...wei.com>, <liuyonglong@...wei.com>,
	<prime.zeng@...ilicon.com>
Subject: [PATCH 5/5] scsi: hisi_sas: Wait until eh is recovered

SATA devices are lost when FLR is performed while the controller and disks
are in suspended state.

This is because the libata layer is called to initialize the SATA device
during controller resuming. If FLR is executed at this time, the IDENTIFY
command fails. As a result, the revalidate fails, and the SATA device is
disabled by the libata layer.

So, wait until eh is recovered.

Signed-off-by: Yihang Li <liyihang9@...wei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index c3cbeb556440..97ff48e7fe5d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -5130,9 +5130,11 @@ static void hisi_sas_reset_prepare_v3_hw(struct pci_dev *pdev)
 {
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct hisi_hba *hisi_hba = sha->lldd_ha;
+	struct Scsi_Host *shost = hisi_hba->shost;
 	struct device *dev = hisi_hba->dev;
 	int rc;
 
+	wait_event(shost->host_wait, !scsi_host_in_recovery(shost));
 	dev_info(dev, "FLR prepare\n");
 	down(&hisi_hba->sem);
 	set_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags);
-- 
2.33.0