[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAO9ioeV9JoED9pvdwJneB1+-=uWW_XZ3Dm0ckQbiv7kfA7usoA@mail.gmail.com>
Date: Tue, 1 Apr 2025 01:00:31 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Christopher Obbard <christopher.obbard@...aro.org>
Cc: Johan Hovold <johan@...nel.org>, Douglas Anderson <dianders@...omium.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, Rui Miguel Silva <rui.silva@...aro.org>,
Abel Vesa <abel.vesa@...aro.org>, devicetree@...r.kernel.org,
"Bryan O'Donoghue" <bryan.odonoghue@...aro.org>
Subject: Re: [PATCH v3 1/2] arm64: dts: qcom: x1e78100-t14s: add hpd gpio to
eDP panel
On Tue, 1 Apr 2025 at 00:38, Christopher Obbard
<christopher.obbard@...aro.org> wrote:
>
> Hi Dmitry,
>
> On Mon, 31 Mar 2025 at 17:49, Dmitry Baryshkov
> <dmitry.baryshkov@....qualcomm.com> wrote:
> >
> > On 31/03/2025 18:39, Christopher Obbard wrote:
> > > Hi Johan,
> > >
> > > On Mon, 31 Mar 2025 at 09:50, Johan Hovold <johan@...nel.org> wrote:
> > >>
> > >> On Thu, Mar 27, 2025 at 04:56:53PM +0000, Christopher Obbard wrote:
> > >>> The eDP panel has an HPD GPIO. Describe it in the device tree
> > >>> for the generic T14s model, as the HPD GPIO property is used in
> > >>> both the OLED and LCD models which inherit this device tree.
> > >>
> > >> AFAICT, this patch is not correct as the hotplug detect signal is
> > >> connected directly to the display controller on (these) Qualcomm SoCs
> > >> and is already handled by its driver.
> > >>
> > >> Describing it as you do here leads to less accurate delays, see commits:
> > >>
> > >> 2327b13d6c47 ("drm/panel-edp: Take advantage of wait_hpd_asserted() in struct drm_dp_aux").
> > >> 3b5765df375c ("drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux")
> > >>
> > >> Perhaps you lose some other functionality too.
> > >>
> > >>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
> > >>> Signed-off-by: Christopher Obbard <christopher.obbard@...aro.org>
> > >>> ---
> > >>> arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 11 +++++++++++
> > >>> 1 file changed, 11 insertions(+)
> > >>>
> > >>> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
> > >>> index 962fb050c55c4fd33f480a21a8c47a484d0c82b8..46c73f5c039ed982b553636cf8c4237a20ba7687 100644
> > >>> --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
> > >>> +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
> > >>> @@ -980,8 +980,12 @@ &mdss_dp3 {
> > >>> aux-bus {
> > >>> panel: panel {
> > >>> compatible = "edp-panel";
> > >>> + hpd-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
> > >>> power-supply = <&vreg_edp_3p3>;
> > >>>
> > >>> + pinctrl-0 = <&edp_hpd_n_default>;
> > >>> + pinctrl-names = "default";
> > >>> +
> > >>> port {
> > >>> edp_panel_in: endpoint {
> > >>> remote-endpoint = <&mdss_dp3_out>;
> > >>> @@ -1286,6 +1290,13 @@ hall_int_n_default: hall-int-n-state {
> > >>> bias-disable;
> > >>> };
> > >>>
> > >>> + edp_hpd_n_default: edp-hpd-n-state {
> > >>> + pins = "gpio119";
> > >>> + function = "gpio";
> > >>> + drive-strength = <2>;
> > >>> + bias-pull-up;
> > >>> + };
> > >>
> > >> I checked the firmware configuration for this pin on my T14s, which
> > >> does not match what you have here. Instead the function is set to
> > >> "edp0_hot" which forwards the signal to the display controller which
> > >> already handles the signal on panel power on. (And there is also no
> > >> internal pull up enabled).
> > >>
> > >> We may want to describe this pin configuration somewhere, but that's a
> > >> separate issue.
> > >
> > > Thanks for your review, I will send another version in coming days and
> > > drop this first patch (adding hpd to the T14s DTSI).
> > >
> > > As a consequence I will need to add no-hpd property to the panel node.
> > No, you won't. There is a HPD line and it is routed to the DP controller.
>
> OK, I think I misunderstand what Johan said. After taking some time to
> think about it in more detail:
> - The first commit will be changed so that the hpd GPIO will be added
> to the X1E DP controller instead of the panel. grepping the source for
> dp_hot_plug_det shows me how to do that. This part is clear.
>
> - The panel node in the generic T14s DTSI should not have the
> hpd-gpios property / pinctrl set.
>
> - The panel node should not have the hpd-gpios property / pinctrl set.
LGTM. Use sc8180x-primus as an example
>
> I hope I understand that correctly. I will send a new series in the
> morning unless there is any objection.
--
With best wishes
Dmitry
Powered by blists - more mailing lists