| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c88b3350-00a8-4596-8713-a8acd829155d@linaro.org>
Date: Mon, 31 Mar 2025 09:33:51 +0100
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: Aleksandrs Vinarskis <alex.vinarskis@...il.com>,
Bjorn Andersson <bjorn.andersson@....qualcomm.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, laurentiu.tudor1@...l.com,
dmitry.baryshkov@....qualcomm.com
Subject: Re: [PATCH v2 1/1] arm64: dts: qcom: x1e80100-dell-xps-9345: Add
WiFi/BT pwrseq
On 31/03/2025 08:33, Aleksandrs Vinarskis wrote:
> Add the WiFi/BT nodes for XPS and describe the regulators for the WCN7850
> combo chip using the new power sequencing bindings. All voltages are
> derived from chained fixed regulators controlled using a single GPIO.
>
> Based on the commit d09ab685a8f5 ("arm64: dts: qcom: x1e80100-qcp: Add
> WiFi/BT pwrseq").
>
> With that fixed commit f5b788d0e8cd ("arm64: dts: qcom: Add support for
> X1-based Dell XPS 13 9345")
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@...il.com>
> ---
> .../dts/qcom/x1e80100-dell-xps13-9345.dts | 144 ++++++++++++++++++
> 1 file changed, 144 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
> index d259a0d12d7b..c924f2a67939 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
> @@ -22,6 +22,7 @@ / {
>
> aliases {
> serial0 = &uart21;
> + serial1 = &uart14;
> };
>
> gpio-keys {
> @@ -288,6 +289,101 @@ vreg_vph_pwr: regulator-vph-pwr {
> regulator-always-on;
> regulator-boot-on;
> };
> +
> + vreg_wcn_0p95: regulator-wcn-0p95 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_WCN_0P95";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> +
> + vin-supply = <&vreg_wcn_3p3>;
> + };
> +
> + vreg_wcn_1p9: regulator-wcn-1p9 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_WCN_1P9";
> + regulator-min-microvolt = <1900000>;
> + regulator-max-microvolt = <1900000>;
> +
> + vin-supply = <&vreg_wcn_3p3>;
> + };
> +
> + vreg_wcn_3p3: regulator-wcn-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_WCN_3P3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&wcn_sw_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + wcn7850-pmu {
> + compatible = "qcom,wcn7850-pmu";
> +
> + vdd-supply = <&vreg_wcn_0p95>;
> + vddio-supply = <&vreg_l15b_1p8>;
> + vddaon-supply = <&vreg_wcn_0p95>;
> + vdddig-supply = <&vreg_wcn_0p95>;
> + vddrfa1p2-supply = <&vreg_wcn_1p9>;
> + vddrfa1p8-supply = <&vreg_wcn_1p9>;
> +
> + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
> + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-0 = <&wcn_wlan_bt_en>;
> + pinctrl-names = "default";
> +
> + regulators {
> + vreg_pmu_rfa_cmn: ldo0 {
> + regulator-name = "vreg_pmu_rfa_cmn";
> + };
> +
> + vreg_pmu_aon_0p59: ldo1 {
> + regulator-name = "vreg_pmu_aon_0p59";
> + };
> +
> + vreg_pmu_wlcx_0p8: ldo2 {
> + regulator-name = "vreg_pmu_wlcx_0p8";
> + };
> +
> + vreg_pmu_wlmx_0p85: ldo3 {
> + regulator-name = "vreg_pmu_wlmx_0p85";
> + };
> +
> + vreg_pmu_btcmx_0p85: ldo4 {
> + regulator-name = "vreg_pmu_btcmx_0p85";
> + };
> +
> + vreg_pmu_rfa_0p8: ldo5 {
> + regulator-name = "vreg_pmu_rfa_0p8";
> + };
> +
> + vreg_pmu_rfa_1p2: ldo6 {
> + regulator-name = "vreg_pmu_rfa_1p2";
> + };
> +
> + vreg_pmu_rfa_1p8: ldo7 {
> + regulator-name = "vreg_pmu_rfa_1p8";
> + };
> +
> + vreg_pmu_pcie_0p9: ldo8 {
> + regulator-name = "vreg_pmu_pcie_0p9";
> + };
> +
> + vreg_pmu_pcie_1p8: ldo9 {
> + regulator-name = "vreg_pmu_pcie_1p8";
> + };
> + };
> + };
> };
>
> &apps_rsc {
> @@ -861,6 +957,23 @@ &pcie4_phy {
> status = "okay";
> };
>
> +&pcie4_port0 {
> + wifi@0 {
> + compatible = "pci17cb,1107";
> + reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> + vddaon-supply = <&vreg_pmu_aon_0p59>;
> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> + };
> +};
> +
> &pcie6a {
> perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
> @@ -1127,6 +1240,37 @@ reset-n-pins {
> drive-strength = <2>;
> };
> };
> +
> + wcn_wlan_bt_en: wcn-wlan-bt-en-state {
> + pins = "gpio116", "gpio117";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + wcn_sw_en: wcn-sw-en-state {
> + pins = "gpio214";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
wcn_sw should come before wcn_wlan
> +};
> +
> +&uart14 {
> + status = "okay";
> +
> + bluetooth {
> + compatible = "qcom,wcn7850-bt";
> + max-speed = <3200000>;
> +
> + vddaon-supply = <&vreg_pmu_aon_0p59>;
> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> + };
> };
Other than that this looks fine and is equivalent to what I have on
Insprion14p - with the exception I see that I don't have the 3v3 rail,
which I probably should.
https://git.codelinaro.org/bryan.odonoghue/kernel/-/blob/x1e80100-6.14-rc6-dell-xps-inspirion14-lenovo-slim7x-t14s-camss-sound-wip/arch/arm64/boot/dts/qcom/x1e80100-dell-inspirion-14-plus-7441.dts?ref_type=heads
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
---
bod
Powered by blists - more mailing lists