[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <10703a6b-3f5f-4611-8545-21aa0e9be660@collabora.com>
Date: Mon, 31 Mar 2025 15:27:46 +0200
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: Louis-Alexis Eyraud <louisalexis.eyraud@...labora.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Matthias Brugger <matthias.bgg@...il.com>
Cc: kernel@...labora.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH] arm64: dts: mediatek: mt8390-genio-common: Force ssusb2
dual role mode to host
Il 31/03/25 11:25, Louis-Alexis Eyraud ha scritto:
> On the Mediatek Genio 510-EVK and 700-EVK boards, ssusb2 controller is
> one but has two ports: one is routed to the M.2 slot, the other is on
> the RPi header who does support full OTG.
> Since Mediatek Genio 700-EVK USB support was added, dual role mode
> property is set to otg for ssusb2. This config prevents the M.2
> Wifi/Bluetooth module, present on those boards and exposing Bluetooth
> as an USB device to be properly detected at startup, so configure for
> the ssusb2 dr_mode property as host instead.
>
> Fixes: 1afaeca17238 ("arm64: dts: mediatek: mt8390-genio-700: Add USB, TypeC Controller, MUX")
> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@...labora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> ---
> I've tested this patch on Mediatek Genio 510-EVK board with a kernel
> based on linux-next (tag: next-20250331).
> ---
> arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
> index 60139e6dffd8e0e326690d922f3360d829ed026b..3a9d429f0f14b501ae41551dfe7272f242345138 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
> @@ -1199,7 +1199,13 @@ xhci_ss_ep: endpoint {
> };
>
> &ssusb2 {
> - dr_mode = "otg";
> + /*
> + * the ssusb2 controller is one but we got two ports : one is routed
> + * to the M.2 slot, the other is on the RPi header who does support
> + * full OTG but we keep it disabled otherwise the BT on the M.2 slot
> + * USB line goes obviously dead if switching to gadget mode.
> + */
> + dr_mode = "host";
> maximum-speed = "high-speed";
> usb-role-switch;
> vusb33-supply = <&mt6359_vusb_ldo_reg>;
>
> ---
> base-commit: 1c4df70331c0dc7f82f724166575c16931ec66b3
> change-id: 20250328-mtk-genio-510-700-fix-bt-detection-2711cbcbb2e4
>
> Best regards,
Powered by blists - more mailing lists