lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e542609d-afee-421a-87ca-18991a65a507@baylibre.com>
Date: Tue, 1 Apr 2025 11:20:08 -0500
From: David Lechner <dlechner@...libre.com>
To: Jonathan Santos <Jonathan.Santos@...log.com>, linux-iio@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-gpio@...r.kernel.org
Cc: lars@...afoo.de, Michael.Hennerich@...log.com,
 marcelo.schmitt@...log.com, jic23@...nel.org, robh@...nel.org,
 krzk+dt@...nel.org, conor+dt@...nel.org, linus.walleij@...aro.org,
 brgl@...ev.pl, lgirdwood@...il.com, broonie@...nel.org,
 marcelo.schmitt1@...il.com, jonath4nns@...il.com,
 Conor Dooley <conor.dooley@...rochip.com>
Subject: Re: [PATCH v4 05/17] dt-bindings: iio: adc: ad7768-1: document
 regulator provider property

On 3/6/25 3:01 PM, Jonathan Santos wrote:
> The AD7768-1 provides a buffered common-mode voltage output
> on the VCM pin that can be used to bias analog input signals.
> 
> Add regulators property to enable the use of the VCM output,
> referenced here as vcm-output, by any other device.
> 
> Acked-by: Conor Dooley <conor.dooley@...rochip.com>
> Signed-off-by: Jonathan Santos <Jonathan.Santos@...log.com>
> ---
> v4 Changes:
> * replace "vcm_output" property name for "vcm-output". 
> 
> v3 Changes:
> * VCM is now provided as a regulator within the device, instead of a 
>   custom property.
> 
> v2 Changes:
> * New patch in v2.
> ---
>  .../bindings/iio/adc/adi,ad7768-1.yaml        | 21 +++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> index e2f9782b5fc8..12358ea9138a 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> @@ -59,6 +59,19 @@ properties:
>        in any way, for example if the filter decimation rate changes.
>        As the line is active low, it should be marked GPIO_ACTIVE_LOW.
>  
> +  regulators:
> +    type: object
> +    description:
> +      list of regulators provided by this controller.
> +
> +    properties:
> +      vcm-output:
> +        $ref: /schemas/regulator/regulator.yaml#
> +        type: object
> +        unevaluatedProperties: false
> +
> +    additionalProperties: false
> +
>    reset-gpios:
>      maxItems: 1
>  
> @@ -152,6 +165,14 @@ examples:
>                  reg = <0>;
>                  label = "channel_0";
>              };
> +
> +            regulators {
> +              vcm_reg: vcm-output {
> +                regulator-name = "ad7768-1-vcm";
> +                regulator-min-microvolt = <900000>;
> +                regulator-max-microvolt = <2500000>;

Why do we have the min and max properties? Aren't these always
going to be the same for all chips? It seems unnecessary to
have to write that in the devicetree.

> +              };
> +            };
>          };
>      };
>  ...


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ