[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250401123507.2e3bf0a6@wsk>
Date: Tue, 1 Apr 2025 12:35:07 +0200
From: Lukasz Majewski <lukma@...x.de>
To: Rob Herring <robh@...nel.org>
Cc: Andrew Lunn <andrew+netdev@...n.ch>, davem@...emloft.net, Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
<pabeni@...hat.com>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer
<s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Richard Cochran
<richardcochran@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 1/4] dt-bindings: net: Add MTIP L2 switch description
Hi Rob,
> On Mon, Mar 31, 2025 at 12:31:13PM +0200, Lukasz Majewski wrote:
> > This patch provides description of the MTIP L2 switch available in
> > some NXP's SOCs - e.g. imx287.
> >
> > Signed-off-by: Lukasz Majewski <lukma@...x.de>
> > ---
> > Changes for v2:
> > - Rename the file to match exactly the compatible
> > (nxp,imx287-mtip-switch)
> >
> > Changes for v3:
> > - Remove '-' from const:'nxp,imx287-mtip-switch'
> > - Use '^port@[12]+$' for port patternProperties
> > - Drop status = "okay";
> > - Provide proper indentation for 'example' binding (replace 8
> > spaces with 4 spaces)
> > - Remove smsc,disable-energy-detect; property
> > - Remove interrupt-parent and interrupts properties as not required
> > - Remove #address-cells and #size-cells from required properties
> > check
> > - remove description from reg:
> > - Add $ref: ethernet-switch.yaml#
> > ---
> > .../bindings/net/nxp,imx287-mtip-switch.yaml | 154
> > ++++++++++++++++++ 1 file changed, 154 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/net/nxp,imx287-mtip-switch.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/net/nxp,imx287-mtip-switch.yaml
> > b/Documentation/devicetree/bindings/net/nxp,imx287-mtip-switch.yaml
> > new file mode 100644 index 000000000000..98eba3665f32 --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/net/nxp,imx287-mtip-switch.yaml
> > @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR
> > BSD-2-Clause) +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/nxp,imx287-mtip-switch.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP SoC Ethernet Switch Controller (L2 MoreThanIP switch)
> > +
> > +maintainers:
> > + - Lukasz Majewski <lukma@...x.de>
> > +
> > +description:
> > + The 2-port switch ethernet subsystem provides ethernet packet
> > (L2)
> > + communication and can be configured as an ethernet switch. It
> > provides the
> > + reduced media independent interface (RMII), the management data
> > input
> > + output (MDIO) for physical layer device (PHY) management.
> > +
> > +$ref: ethernet-switch.yaml#
>
> This needs to be: ethernet-switch.yaml#/$defs/ethernet-ports
>
> With that, you can drop much of the below part. More below...
>
> > +
> > +properties:
So it shall be after the "properties:"
$ref: ethernet-switch.yaml#/$defs/ethernet-ports [*]
> > + compatible:
> > + const: nxp,imx287-mtip-switch
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + phy-supply:
> > + description:
> > + Regulator that powers Ethernet PHYs.
> > +
> > + clocks:
> > + items:
> > + - description: Register accessing clock
> > + - description: Bus access clock
> > + - description: Output clock for external device - e.g. PHY
> > source clock
> > + - description: IEEE1588 timer clock
> > +
> > + clock-names:
> > + items:
> > + - const: ipg
> > + - const: ahb
> > + - const: enet_out
> > + - const: ptp
> > +
> > + interrupts:
> > + items:
> > + - description: Switch interrupt
> > + - description: ENET0 interrupt
> > + - description: ENET1 interrupt
> > +
> > + pinctrl-names: true
> > +
>
> > + ethernet-ports:
And then this "node" can be removed as it has been referenced above [*]?
(I shall only keep the properties, which are not standard to [*] if
any).
> > + type: object
> > + additionalProperties: false
> > +
> > + properties:
> > + '#address-cells':
> > + const: 1
> > + '#size-cells':
> > + const: 0
> > +
> > + patternProperties:
> > + '^port@[12]+$':
>
> Note that 'ethernet-port' is the preferred node name though 'port' is
> allowed.
Ok. That would be the correct define:
ethernet-ports {
mtip_port1: ethernet-port@1 {
reg = <1>;
label = "lan0";
local-mac-address = [ 00 00 00 00 00 00 ];
phy-mode = "rmii";
phy-handle = <ðphy0>;
};
mtip_port2: port@2 {
....
};
>
> > + type: object
> > + description: MTIP L2 switch external ports
> > +
> > + $ref: ethernet-controller.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + reg:
> > + items:
> > + - enum: [1, 2]
> > + description: MTIP L2 switch port number
> > +
> > + label:
> > + description: Label associated with this port
> > +
> > + required:
> > + - reg
> > + - label
> > + - phy-mode
> > + - phy-handle
>
> All the above under 'ethernet-ports' can be dropped though you might
> want to keep 'required' part.
Ok, I will keep it.
>
> > +
> > + mdio:
> > + type: object
> > + $ref: mdio.yaml#
> > + unevaluatedProperties: false
> > + description:
> > + Specifies the mdio bus in the switch, used as a container
> > for phy nodes. +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
> > + - interrupts
> > + - mdio
> > + - ethernet-ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include<dt-bindings/interrupt-controller/irq.h>
> > + switch@...f0000 {
> > + compatible = "nxp,imx287-mtip-switch";
> > + reg = <0x800f0000 0x20000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&mac0_pins_a>, <&mac1_pins_a>;
> > + phy-supply = <®_fec_3v3>;
> > + interrupts = <100>, <101>, <102>;
> > + clocks = <&clks 57>, <&clks 57>, <&clks 64>, <&clks 35>;
> > + clock-names = "ipg", "ahb", "enet_out", "ptp";
> > +
> > + ethernet-ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + mtip_port1: port@1 {
> > + reg = <1>;
> > + label = "lan0";
> > + local-mac-address = [ 00 00 00 00 00 00 ];
> > + phy-mode = "rmii";
> > + phy-handle = <ðphy0>;
> > + };
> > +
> > + mtip_port2: port@2 {
> > + reg = <2>;
> > + label = "lan1";
> > + local-mac-address = [ 00 00 00 00 00 00 ];
> > + phy-mode = "rmii";
> > + phy-handle = <ðphy1>;
> > + };
> > + };
> > +
> > + mdio_sw: mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reset-gpios = <&gpio2 13 0>;
> > + reset-delay-us = <25000>;
> > + reset-post-delay-us = <10000>;
> > +
> > + ethphy0: ethernet-phy@0 {
> > + reg = <0>;
> > + };
> > +
> > + ethphy1: ethernet-phy@1 {
> > + reg = <1>;
> > + };
> > + };
> > + };
> > --
> > 2.39.5
> >
Thanks for the hint.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists