lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250403181907.1947517-9-sean.anderson@linux.dev>
Date: Thu,  3 Apr 2025 14:19:02 -0400
From: Sean Anderson <sean.anderson@...ux.dev>
To: netdev@...r.kernel.org,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Russell King <linux@...linux.org.uk>
Cc: linux-kernel@...r.kernel.org,
	Christian Marangi <ansuelsmth@...il.com>,
	upstream@...oha.com,
	Heiner Kallweit <hkallweit1@...il.com>,
	Sean Anderson <sean.anderson@...ux.dev>,
	Michal Simek <michal.simek@....com>,
	Radhey Shyam Pandey <radhey.shyam.pandey@....com>,
	Robert Hancock <robert.hancock@...ian.com>,
	linux-arm-kernel@...ts.infradead.org
Subject: [RFC net-next PATCH 08/13] net: axienet: Convert to use PCS subsystem

Convert the AXI Ethernet driver to use the PCS subsystem, including the
new Xilinx PCA/PMA driver. Unfortunately, we must use a helper to work
with bare MDIO nodes without a compatible.

Signed-off-by: Sean Anderson <sean.anderson@...ux.dev>
---

 drivers/net/ethernet/xilinx/Kconfig           |   1 +
 drivers/net/ethernet/xilinx/xilinx_axienet.h  |   4 +-
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 104 ++++--------------
 drivers/net/pcs/Kconfig                       |   1 -
 4 files changed, 22 insertions(+), 88 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 7502214cc7d5..2eab64cf1646 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -27,6 +27,7 @@ config XILINX_AXI_EMAC
 	tristate "Xilinx 10/100/1000 AXI Ethernet support"
 	depends on HAS_IOMEM
 	depends on XILINX_DMA
+	select OF_DYNAMIC if PCS_XILINX
 	select PHYLINK
 	select DIMLIB
 	help
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 5ff742103beb..f46e862245eb 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -473,7 +473,6 @@ struct skbuf_dma_descriptor {
  * @dev:	Pointer to device structure
  * @phylink:	Pointer to phylink instance
  * @phylink_config: phylink configuration settings
- * @pcs_phy:	Reference to PCS/PMA PHY if used
  * @pcs:	phylink pcs structure for PCS PHY
  * @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in the core
  * @axi_clk:	AXI4-Lite bus clock
@@ -553,8 +552,7 @@ struct axienet_local {
 	struct phylink *phylink;
 	struct phylink_config phylink_config;
 
-	struct mdio_device *pcs_phy;
-	struct phylink_pcs pcs;
+	struct phylink_pcs *pcs;
 
 	bool switch_x_sgmii;
 
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 054abf283ab3..07487c4b2141 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -35,6 +35,8 @@
 #include <linux/platform_device.h>
 #include <linux/skbuff.h>
 #include <linux/math64.h>
+#include <linux/pcs.h>
+#include <linux/pcs-xilinx.h>
 #include <linux/phy.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
@@ -2519,63 +2521,6 @@ static const struct ethtool_ops axienet_ethtool_ops = {
 	.get_rmon_stats = axienet_ethtool_get_rmon_stats,
 };
 
-static struct axienet_local *pcs_to_axienet_local(struct phylink_pcs *pcs)
-{
-	return container_of(pcs, struct axienet_local, pcs);
-}
-
-static void axienet_pcs_get_state(struct phylink_pcs *pcs,
-				  unsigned int neg_mode,
-				  struct phylink_link_state *state)
-{
-	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
-
-	phylink_mii_c22_pcs_get_state(pcs_phy, neg_mode, state);
-}
-
-static void axienet_pcs_an_restart(struct phylink_pcs *pcs)
-{
-	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
-
-	phylink_mii_c22_pcs_an_restart(pcs_phy);
-}
-
-static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
-			      phy_interface_t interface,
-			      const unsigned long *advertising,
-			      bool permit_pause_to_mac)
-{
-	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
-	struct net_device *ndev = pcs_to_axienet_local(pcs)->ndev;
-	struct axienet_local *lp = netdev_priv(ndev);
-	int ret;
-
-	if (lp->switch_x_sgmii) {
-		ret = mdiodev_write(pcs_phy, XLNX_MII_STD_SELECT_REG,
-				    interface == PHY_INTERFACE_MODE_SGMII ?
-					XLNX_MII_STD_SELECT_SGMII : 0);
-		if (ret < 0) {
-			netdev_warn(ndev,
-				    "Failed to switch PHY interface: %d\n",
-				    ret);
-			return ret;
-		}
-	}
-
-	ret = phylink_mii_c22_pcs_config(pcs_phy, interface, advertising,
-					 neg_mode);
-	if (ret < 0)
-		netdev_warn(ndev, "Failed to configure PCS: %d\n", ret);
-
-	return ret;
-}
-
-static const struct phylink_pcs_ops axienet_pcs_ops = {
-	.pcs_get_state = axienet_pcs_get_state,
-	.pcs_config = axienet_pcs_config,
-	.pcs_an_restart = axienet_pcs_an_restart,
-};
-
 static struct phylink_pcs *axienet_mac_select_pcs(struct phylink_config *config,
 						  phy_interface_t interface)
 {
@@ -2583,8 +2528,8 @@ static struct phylink_pcs *axienet_mac_select_pcs(struct phylink_config *config,
 	struct axienet_local *lp = netdev_priv(ndev);
 
 	if (interface == PHY_INTERFACE_MODE_1000BASEX ||
-	    interface ==  PHY_INTERFACE_MODE_SGMII)
-		return &lp->pcs;
+	    interface == PHY_INTERFACE_MODE_SGMII)
+		return lp->pcs;
 
 	return NULL;
 }
@@ -3056,28 +3001,23 @@ static int axienet_probe(struct platform_device *pdev)
 
 	if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII ||
 	    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
-		np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
-		if (!np) {
-			/* Deprecated: Always use "pcs-handle" for pcs_phy.
-			 * Falling back to "phy-handle" here is only for
-			 * backward compatibility with old device trees.
-			 */
-			np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
-		}
-		if (!np) {
-			dev_err(&pdev->dev, "pcs-handle (preferred) or phy-handle required for 1000BaseX/SGMII\n");
-			ret = -EINVAL;
-			goto cleanup_mdio;
-		}
-		lp->pcs_phy = of_mdio_find_device(np);
-		if (!lp->pcs_phy) {
-			ret = -EPROBE_DEFER;
-			of_node_put(np);
+		DECLARE_PHY_INTERFACE_MASK(interfaces);
+
+		phy_interface_zero(interfaces);
+		if (lp->switch_x_sgmii ||
+		    lp->phy_mode == PHY_INTERFACE_MODE_SGMII)
+			__set_bit(PHY_INTERFACE_MODE_SGMII, interfaces);
+		if (lp->switch_x_sgmii ||
+		    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX)
+			__set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+
+		lp->pcs = axienet_xilinx_pcs_get(&pdev->dev, interfaces);
+		if (IS_ERR(lp->pcs)) {
+			ret = PTR_ERR(lp->pcs);
+			dev_err_probe(&pdev->dev, ret,
+				      "could not get PCS for 1000BASE-X/SGMII\n");
 			goto cleanup_mdio;
 		}
-		of_node_put(np);
-		lp->pcs.ops = &axienet_pcs_ops;
-		lp->pcs.poll = true;
 	}
 
 	lp->phylink_config.dev = &ndev->dev;
@@ -3115,8 +3055,6 @@ static int axienet_probe(struct platform_device *pdev)
 	phylink_destroy(lp->phylink);
 
 cleanup_mdio:
-	if (lp->pcs_phy)
-		put_device(&lp->pcs_phy->dev);
 	if (lp->mii_bus)
 		axienet_mdio_teardown(lp);
 cleanup_clk:
@@ -3139,9 +3077,7 @@ static void axienet_remove(struct platform_device *pdev)
 	if (lp->phylink)
 		phylink_destroy(lp->phylink);
 
-	if (lp->pcs_phy)
-		put_device(&lp->pcs_phy->dev);
-
+	pcs_put(&pdev->dev, lp->pcs);
 	axienet_mdio_teardown(lp);
 
 	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig
index c28b4630492a..d9369a525498 100644
--- a/drivers/net/pcs/Kconfig
+++ b/drivers/net/pcs/Kconfig
@@ -63,7 +63,6 @@ config PCS_XILINX
 	depends on PCS
 	select MDIO_DEVICE
 	select PHYLINK
-	default XILINX_AXI_EMAC
 	tristate "Xilinx PCS driver"
 	help
 	  PCS driver for the Xilinx 1G/2.5G Ethernet PCS/PMA or SGMII device.
-- 
2.35.1.1320.gc452695387.dirty


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ