lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250406010532.1212894-1-peng.fan@oss.nxp.com>
Date: Sun,  6 Apr 2025 09:05:23 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>,
	Jaroslav Kysela <perex@...ex.cz>,
	Takashi Iwai <tiwai@...e.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Bartosz Golaszewski <brgl@...ev.pl>,
	Peng Fan <peng.fan@....com>,
	linux-sound@...r.kernel.org (open list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...),
	linux-kernel@...r.kernel.org (open list),
	linux-gpio@...r.kernel.org (open list:GPIO SUBSYSTEM:Keyword:(devm_)?gpio_(request|free|direction|get|set))
Cc: andriy.shevchenko@...el.com
Subject: [PATCH V2] ASoC: codec: ak5386: Convert to GPIO descriptors

From: Peng Fan <peng.fan@....com>

 of_gpio.h is deprecated, update the driver to use GPIO descriptors.
 - Use devm_gpiod_get_optional to get GPIO descriptor.
 - Use gpiod_set_value to configure output value.

With legacy of_gpio API, the driver set GPIO value 1 to power up
AK5386, and set value 0 to power down.
Per datasheet for PDN(reset_gpio in the driver):
 Power Down & Reset Mode Pin
 “H”: Power up, “L”: Power down & Reset
 The AK5386 must be reset once upon power-up.

There is no in-tree DTS using this codec, and the bindings does not
specify polarity. Per driver and datasheet, the GPIO polarity should be
active-high which is to power up the codec. So using GPIOD_OUT_LOW
when get the GPIO descriptor matches GPIOF_OUT_INIT_LOW when using
of_gpio API.

Signed-off-by: Peng Fan <peng.fan@....com>
---

V2:
 Typo fixes in commit log
 Drop uneeded gpio check before gpiod_set_value
 Include more headers

 sound/soc/codecs/ak5386.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/sound/soc/codecs/ak5386.c b/sound/soc/codecs/ak5386.c
index 21a44476f48d..6525d50b7ab2 100644
--- a/sound/soc/codecs/ak5386.c
+++ b/sound/soc/codecs/ak5386.c
@@ -6,11 +6,13 @@
  * (c) 2013 Daniel Mack <zonque@...il.com>
  */
 
+#include <linux/device.h>
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/regulator/consumer.h>
+#include <linux/slab.h>
 #include <sound/soc.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
@@ -20,7 +22,7 @@ static const char * const supply_names[] = {
 };
 
 struct ak5386_priv {
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
 	struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
 };
 
@@ -110,8 +112,7 @@ static int ak5386_hw_params(struct snd_pcm_substream *substream,
 	 * the AK5386 in power-down mode (PDN pin = “L”).
 	 */
 
-	if (gpio_is_valid(priv->reset_gpio))
-		gpio_set_value(priv->reset_gpio, 1);
+	gpiod_set_value(priv->reset_gpio, 1);
 
 	return 0;
 }
@@ -122,8 +123,7 @@ static int ak5386_hw_free(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component = dai->component;
 	struct ak5386_priv *priv = snd_soc_component_get_drvdata(component);
 
-	if (gpio_is_valid(priv->reset_gpio))
-		gpio_set_value(priv->reset_gpio, 0);
+	gpiod_set_value(priv->reset_gpio, 0);
 
 	return 0;
 }
@@ -177,14 +177,12 @@ static int ak5386_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	priv->reset_gpio = of_get_named_gpio(dev->of_node,
-					     "reset-gpio", 0);
+	priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
+				     "Failed to get AK5386 reset GPIO\n");
 
-	if (gpio_is_valid(priv->reset_gpio))
-		if (devm_gpio_request_one(dev, priv->reset_gpio,
-					  GPIOF_OUT_INIT_LOW,
-					  "AK5386 Reset"))
-			priv->reset_gpio = -EINVAL;
+	gpiod_set_consumer_name(priv->reset_gpio, "AK5386 Reset");
 
 	return devm_snd_soc_register_component(dev, &soc_component_ak5386,
 				      &ak5386_dai, 1);
-- 
2.37.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ