[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250407133138.22449-5-bincai.liu@mediatek.com>
Date: Mon, 7 Apr 2025 21:31:25 +0800
From: Bincai Liu <bincai.liu@...iatek.com>
To: Chun-Kuang Hu <chunkuang.hu@...nel.org>, Philipp Zabel
<p.zabel@...gutronix.de>, David Airlie <airlied@...il.com>, Simona Vetter
<simona@...ll.ch>, Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Chunfeng Yun <chunfeng.yun@...iatek.com>,
Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>, AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>, Jitao Shi <jitao.shi@...iatek.com>
CC: <dri-devel@...ts.freedesktop.org>, <linux-mediatek@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-phy@...ts.infradead.org>,
Bincai Liu <bincai.liu@...iatek.com>
Subject: [PATCH 4/4] drm/mediatek: dsi: Enable runtime PM
This power is new added in MT8196. So runtime PM is enable
to turn off dsi power to reduce power consumption.
Signed-off-by: Bincai Liu <bincai.liu@...iatek.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index b1467d6bed06..21cfba1f9b89 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -12,6 +12,7 @@
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/units.h>
@@ -715,6 +716,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
dsi->data_rate = DIV_ROUND_UP_ULL(dsi->vm.pixelclock * bit_per_pixel,
dsi->lanes);
+ pm_runtime_get_sync(dsi->host.dev);
ret = clk_set_rate(dsi->hs_clk, dsi->data_rate);
if (ret < 0) {
dev_err(dev, "Failed to set data rate: %d\n", ret);
@@ -789,6 +791,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
clk_disable_unprepare(dsi->digital_clk);
phy_power_off(dsi->phy);
+ pm_runtime_put_sync(dsi->host.dev);
dsi->lanes_ready = false;
}
@@ -1272,6 +1275,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
dsi->bridge.funcs = &mtk_dsi_bridge_funcs;
dsi->bridge.of_node = dev->of_node;
dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+ pm_runtime_enable(dev);
return 0;
}
@@ -1282,6 +1286,7 @@ static void mtk_dsi_remove(struct platform_device *pdev)
mtk_output_dsi_disable(dsi);
mipi_dsi_host_unregister(&dsi->host);
+ pm_runtime_disable(&pdev->dev);
}
static const struct mtk_dsi_driver_data mt8173_dsi_driver_data = {
--
2.45.2
Powered by blists - more mailing lists