[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250407145157.3626463-3-lukma@denx.de>
Date: Mon, 7 Apr 2025 16:51:54 +0200
From: Lukasz Majewski <lukma@...x.de>
To: Andrew Lunn <andrew+netdev@...n.ch>,
davem@...emloft.net,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>
Cc: Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Richard Cochran <richardcochran@...il.com>,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org,
Stefan Wahren <wahrenst@....net>,
Lukasz Majewski <lukma@...x.de>,
Andrew Lunn <andrew@...n.ch>
Subject: [net-next v4 2/5] ARM: dts: nxp: mxs: Adjust the imx28.dtsi L2 switch description
The current range of 'reg' property is too small to allow full control
of the L2 switch on imx287.
As this IP block also uses ENET-MAC blocks for its operation, the address
range for it must be included as well.
Moreover, some SoC common properties (like compatible, clocks, interrupts
numbers) have been moved to this node.
Signed-off-by: Lukasz Majewski <lukma@...x.de>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
Changes for v2:
- adding extra properties (like compatible, clocks, interupts)
Changes for v3:
- None
Changes for v4:
- Rename imx287 with imx28 (as the former is not used in kernel anymore)
---
arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index bbea8b77386f..a0b565ffc83d 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -1321,8 +1321,12 @@ mac1: ethernet@...f4000 {
status = "disabled";
};
- eth_switch: switch@...f8000 {
- reg = <0x800f8000 0x8000>;
+ eth_switch: switch@...f0000 {
+ compatible = "nxp,imx28-mtip-switch";
+ reg = <0x800f0000 0x20000>;
+ interrupts = <100>, <101>, <102>;
+ clocks = <&clks 57>, <&clks 57>, <&clks 64>, <&clks 35>;
+ clock-names = "ipg", "ahb", "enet_out", "ptp";
status = "disabled";
};
};
--
2.39.5
Powered by blists - more mailing lists