[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5jvedjfbkuumgmqovf65cavdgnta5zss3emiwnwdnh5o3aw7te@4d5ecfbxlwui>
Date: Tue, 8 Apr 2025 16:57:18 -0500
From: Bjorn Andersson <andersson@...nel.org>
To: Luca Weiss <luca.weiss@...rphone.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
cros-qcom-dts-watchers@...omium.org, linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Neil Armstrong <neil.armstrong@...aro.org>,
Dmitry Baryshkov <lumag@...nel.org>
Subject: Re: [PATCH v2 03/24] ARM: dts: qcom: msm8916: Use the header with
DSI phy clock IDs
On Tue, Apr 08, 2025 at 12:23:18PM +0200, Luca Weiss wrote:
> On Tue Apr 8, 2025 at 11:32 AM CEST, Krzysztof Kozlowski wrote:
> > Use the header with DSI phy clock IDs to make code more readable.
>
> Hi Krzysztof,
>
> This patch was the wrong subject, it's touching arm64, not arm32.
>
Thanks for spotting this, I'll fix it up while applying the patches.
Thanks,
Bjorn
> And thanks for sending this series, it's nice to see some magic numbers
> disappear that make little sense if you don't know what it's about :)
>
> Regards
> Luca
>
> >
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> > Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> > ---
> > arch/arm64/boot/dts/qcom/msm8916.dtsi | 9 +++++----
> > 1 file changed, 5 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> > index 8f35c9af18782aa1da7089988692e6588c4b7c5d..c89f9e92e832eae8f630555e9e7f5817d6731d4d 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> > @@ -4,6 +4,7 @@
> > */
> >
> > #include <dt-bindings/arm/coresight-cti-dt.h>
> > +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
> > #include <dt-bindings/clock/qcom,gcc-msm8916.h>
> > #include <dt-bindings/clock/qcom,rpmcc.h>
> > #include <dt-bindings/interconnect/qcom,msm8916.h>
> > @@ -1497,8 +1498,8 @@ gcc: clock-controller@...0000 {
> > reg = <0x01800000 0x80000>;
> > clocks = <&xo_board>,
> > <&sleep_clk>,
> > - <&mdss_dsi0_phy 1>,
> > - <&mdss_dsi0_phy 0>,
> > + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
> > + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
> > <0>,
> > <0>,
> > <0>;
> > @@ -1590,8 +1591,8 @@ mdss_dsi0: dsi@...8000 {
> >
> > assigned-clocks = <&gcc BYTE0_CLK_SRC>,
> > <&gcc PCLK0_CLK_SRC>;
> > - assigned-clock-parents = <&mdss_dsi0_phy 0>,
> > - <&mdss_dsi0_phy 1>;
> > + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
> > + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
> >
> > clocks = <&gcc GCC_MDSS_MDP_CLK>,
> > <&gcc GCC_MDSS_AHB_CLK>,
>
Powered by blists - more mailing lists