linux-kernel - [PATCH ath-next v4 3/9] wifi: ath12k: fix failed to set mhi state error during reboot with hardware grouping

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250408-fix_reboot_issues_with_hw_grouping-v4-3-95e7bf048595@oss.qualcomm.com>
Date: Tue, 08 Apr 2025 11:36:31 +0530
From: Aditya Kumar Singh <aditya.kumar.singh@....qualcomm.com>
To: Johannes Berg <johannes@...solutions.net>,
        Jeff Johnson <jjohnson@...nel.org>,
        Karthikeyan Periyasamy <quic_periyasa@...cinc.com>,
        Kalle Valo <kvalo@...nel.org>, Harshitha Prem <quic_hprem@...cinc.com>
Cc: Jeff Johnson <jeff.johnson@....qualcomm.com>,
        linux-wireless@...r.kernel.org, ath12k@...ts.infradead.org,
        linux-kernel@...r.kernel.org,
        Aditya Kumar Singh <aditya.kumar.singh@....qualcomm.com>
Subject: [PATCH ath-next v4 3/9] wifi: ath12k: fix failed to set mhi state
 error during reboot with hardware grouping

With hardware grouping, during reboot, whenever a device is removed, it
powers down itself and all its partner devices in the same group. Now this
is done by all devices and hence there is multiple power down for devices
and hence the following error messages can be seen:

ath12k_pci 0002:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0002:01:00.0: failed to set mhi state: POWER_OFF(3)
ath12k_pci 0002:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0)
ath12k_pci 0002:01:00.0: failed to set mhi state: DEINIT(1)
ath12k_pci 0003:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0003:01:00.0: failed to set mhi state: POWER_OFF(3)
ath12k_pci 0003:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0)
ath12k_pci 0003:01:00.0: failed to set mhi state: DEINIT(1)
ath12k_pci 0004:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0004:01:00.0: failed to set mhi state: POWER_OFF(3)

To prevent this, check if the ATH12K_PCI_FLAG_INIT_DONE flag is already
set before powering down. If it is set, it indicates that another partner
device has already performed the power down, and this device can skip this
step.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@....qualcomm.com>
---
 drivers/net/wireless/ath/ath12k/pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index 7f1bb150f326b317157f6721d990d61a27f38d6a..aae1989c686bda37c12544e72338bbfbc5f75042 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -1487,6 +1487,9 @@ void ath12k_pci_power_down(struct ath12k_base *ab, bool is_suspend)
 {
 	struct ath12k_pci *ab_pci = ath12k_pci_priv(ab);
 
+	if (!test_bit(ATH12K_PCI_FLAG_INIT_DONE, &ab_pci->flags))
+		return;
+
 	/* restore aspm in case firmware bootup fails */
 	ath12k_pci_aspm_restore(ab_pci);
 

-- 
2.34.1