lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20250409072604.3410459-1-ziniu.wang_1@nxp.com>
Date: Wed,  9 Apr 2025 15:26:04 +0800
From: ziniu.wang_1@....com
To: adrian.hunter@...el.com,
	ulf.hansson@...aro.org,
	haibo.chen@....com
Cc: shawnguo@...nel.org,
	s.hauer@...gutronix.de,
	kernel@...gutronix.de,
	festevam@...il.com,
	imx@...ts.linux.dev,
	linux-mmc@...r.kernel.org,
	s32@....com,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2] mmc: sdhci-esdhc-imx: calculate data timeout value based on clock

From: Luke Wang <ziniu.wang_1@....com>

Calculate data timeout value based on clock instead of using max value.

Signed-off-by: Luke Wang <ziniu.wang_1@....com>
---
v1->v2:
 * Added SDHCI_TIMEOUT_CONTROL to esdhc_writeb_le()
 * Removed esdhc_set_timeout() to use common __sdhci_set_timeout().
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ff78a7c6a04c..a34cabee5916 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -870,6 +870,16 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 
 		esdhc_clrset_le(host, mask, new_val, reg);
 		return;
+	case SDHCI_TIMEOUT_CONTROL:
+		/*
+		 * ESDHC_SYSTEM_CONTROL bit[23] used to control hardware reset
+		 * pin of the card. Write 0 to bit[23] will reset the card.
+		 * Only write DTOCV field here.
+		 */
+		esdhc_clrset_le(host, ESDHC_SYS_CTRL_DTOCV_MASK,
+				FIELD_PREP(ESDHC_SYS_CTRL_DTOCV_MASK, val),
+				ESDHC_SYSTEM_CONTROL);
+		return;
 	case SDHCI_SOFTWARE_RESET:
 		if (val & SDHCI_RESET_DATA)
 			new_val = readl(host->ioaddr + SDHCI_HOST_CONTROL);
@@ -1385,17 +1395,6 @@ static unsigned int esdhc_get_max_timeout_count(struct sdhci_host *host)
 	return esdhc_is_usdhc(imx_data) ? 1 << 29 : 1 << 27;
 }
 
-static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
-{
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
-
-	/* use maximum timeout counter */
-	esdhc_clrset_le(host, ESDHC_SYS_CTRL_DTOCV_MASK,
-			esdhc_is_usdhc(imx_data) ? 0xF0000 : 0xE0000,
-			ESDHC_SYSTEM_CONTROL);
-}
-
 static u32 esdhc_cqhci_irq(struct sdhci_host *host, u32 intmask)
 {
 	int cmd_error = 0;
@@ -1432,7 +1431,6 @@ static struct sdhci_ops sdhci_esdhc_ops = {
 	.get_min_clock = esdhc_pltfm_get_min_clock,
 	.get_max_timeout_count = esdhc_get_max_timeout_count,
 	.get_ro = esdhc_pltfm_get_ro,
-	.set_timeout = esdhc_set_timeout,
 	.set_bus_width = esdhc_pltfm_set_bus_width,
 	.set_uhs_signaling = esdhc_set_uhs_signaling,
 	.reset = esdhc_reset,
@@ -1777,6 +1775,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		 * to distinguish the card type.
 		 */
 		host->mmc_host_ops.init_card = usdhc_init_card;
+
+		host->max_timeout_count = 0xF;
 	}
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ