[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Z_dEXjck56Q_M6r3@ketchup>
Date: Thu, 10 Apr 2025 04:09:02 +0000
From: Haylen Chu <heylenay@....org>
To: Alex Elder <elder@...cstar.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Haylen Chu <heylenay@...look.com>, Yixun Lan <dlan@...too.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Alexandre Ghiti <alex@...ti.fr>
Cc: linux-riscv@...ts.infradead.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
spacemit@...ts.linux.dev, Inochi Amaoto <inochiama@...look.com>,
Chen Wang <unicornxdotw@...mail.com>,
Jisheng Zhang <jszhang@...nel.org>,
Meng Zhang <zhangmeng.kevin@...ux.spacemit.com>
Subject: Re: [PATCH v6 4/6] clk: spacemit: k1: Add TWSI8 bus and function
clocks
On Tue, Apr 08, 2025 at 02:37:29PM -0500, Alex Elder wrote:
> On 4/1/25 12:24 PM, Haylen Chu wrote:
> > The control register for TWSI8 clocks, APBC_TWSI8_CLK_RST, contains mux
> > selection bits, reset assertion bit and enable bits for function and bus
> > clocks. It has a quirk that reading always results in zero.
> >
> > As a workaround, let's hardcode the mux value as zero to select
> > pll1_d78_31p5 as parent and treat twsi8_clk as a gate, whose enable mask
> > is combined from the real bus and function clocks to avoid the
> > write-only register being shared between two clk_hws, in which case
> > updates of one clk_hw zero the other's bits.
> >
> > With a 1:1 factor serving as placeholder for the bus clock, the I2C-8
> > controller could be brought up, which is essential for boards attaching
> > power-management chips to it.
> >
> > Signed-off-by: Haylen Chu <heylenay@....org>
>
> Now that I understand why, I'm glad you put this into a separate
> patch. However I think you should make a note in the code to
> indicate there's something different about this one clock.
> People can then go back (with "git blame") to see the explanation
> above.
>
> Please consider adding such a comment in your next version.
Sure I'm willing to.
> Reviewed-by: Alex Elder <elder@...cstar.com>
Best regards,
Haylen Chu
> > ---
> > drivers/clk/spacemit/ccu-k1.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
> > index cd95c4f9c127..5804c2f85407 100644
> > --- a/drivers/clk/spacemit/ccu-k1.c
> > +++ b/drivers/clk/spacemit/ccu-k1.c
> > @@ -397,6 +397,8 @@ CCU_MUX_GATE_DEFINE(twsi6_clk, twsi_parents, APBC_TWSI6_CLK_RST, 4, 3, BIT(1),
> > 0);
> > CCU_MUX_GATE_DEFINE(twsi7_clk, twsi_parents, APBC_TWSI7_CLK_RST, 4, 3, BIT(1),
> > 0);
> > +CCU_GATE_DEFINE(twsi8_clk, CCU_PARENT_HW(pll1_d78_31p5), APBC_TWSI8_CLK_RST,
> > + BIT(1) | BIT(0), 0);
> > static const struct clk_parent_data timer_parents[] = {
> > CCU_PARENT_HW(pll1_d192_12p8),
> > @@ -528,6 +530,7 @@ CCU_GATE_DEFINE(twsi6_bus_clk, CCU_PARENT_HW(apb_clk), APBC_TWSI6_CLK_RST,
> > BIT(0), 0);
> > CCU_GATE_DEFINE(twsi7_bus_clk, CCU_PARENT_HW(apb_clk), APBC_TWSI7_CLK_RST,
> > BIT(0), 0);
> > +CCU_FACTOR_DEFINE(twsi8_bus_clk, CCU_PARENT_HW(apb_clk), 1, 1);
> > CCU_GATE_DEFINE(timers1_bus_clk, CCU_PARENT_HW(apb_clk), APBC_TIMERS1_CLK_RST,
> > BIT(0), 0);
> > @@ -1059,6 +1062,7 @@ static struct clk_hw *k1_ccu_apbc_hws[] = {
> > [CLK_TWSI5] = &twsi5_clk.common.hw,
> > [CLK_TWSI6] = &twsi6_clk.common.hw,
> > [CLK_TWSI7] = &twsi7_clk.common.hw,
> > + [CLK_TWSI8] = &twsi8_clk.common.hw,
> > [CLK_TIMERS1] = &timers1_clk.common.hw,
> > [CLK_TIMERS2] = &timers2_clk.common.hw,
> > [CLK_AIB] = &aib_clk.common.hw,
> > @@ -1110,6 +1114,7 @@ static struct clk_hw *k1_ccu_apbc_hws[] = {
> > [CLK_TWSI5_BUS] = &twsi5_bus_clk.common.hw,
> > [CLK_TWSI6_BUS] = &twsi6_bus_clk.common.hw,
> > [CLK_TWSI7_BUS] = &twsi7_bus_clk.common.hw,
> > + [CLK_TWSI8_BUS] = &twsi8_bus_clk.common.hw,
> > [CLK_TIMERS1_BUS] = &timers1_bus_clk.common.hw,
> > [CLK_TIMERS2_BUS] = &timers2_bus_clk.common.hw,
> > [CLK_AIB_BUS] = &aib_bus_clk.common.hw,
>
Powered by blists - more mailing lists