| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250410-hp-x14-v1-2-b4e5ca253ec9@oldschoolsolutions.biz>
Date: Thu, 10 Apr 2025 11:13:23 +0200
From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Jens Glathe <jens.glathe@...schoolsolutions.biz>
Subject: [PATCH 2/5] arm64: dts: qcom: x1e80100-hp-x14: remove PS8830
retimer 1 definitions
From: Jens Glathe <jens.glathe@...schoolsolutions.biz>
Clean-up of regulators, i2c definition, pinctrl
Signed-off-by: Jens Glathe <jens.glathe@...schoolsolutions.biz>
---
.../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 134 ---------------------
1 file changed, 134 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index 27f6b21589704b1767d45763773da4cf9c43c77b..582d4326d5d527d20f99e716349ea0e9c0d35099 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -370,54 +370,6 @@ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
regulator-boot-on;
};
- vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR1_1P15";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
-
- gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR1_1P8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR1_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
vreg_vph_pwr: regulator-vph-pwr {
compatible = "regulator-fixed";
@@ -1046,64 +998,6 @@ eusb3_repeater: redriver@47 {
};
};
-&i2c7 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- typec-mux@8 {
- compatible = "parade,ps8830";
- reg = <0x8>;
-
- clocks = <&rpmhcc RPMH_RF_CLK4>;
-
- vdd-supply = <&vreg_rtmr1_1p15>;
- vdd33-supply = <&vreg_rtmr1_3p3>;
- vdd33-cap-supply = <&vreg_rtmr1_3p3>;
- vddar-supply = <&vreg_rtmr1_1p15>;
- vddat-supply = <&vreg_rtmr1_1p15>;
- vddio-supply = <&vreg_rtmr1_1p8>;
-
- reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&rtmr1_default>;
- pinctrl-names = "default";
-
- orientation-switch;
- retimer-switch;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- retimer_ss1_ss_out: endpoint {
- remote-endpoint = <&pmic_glink_ss1_ss_in>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- retimer_ss1_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss1_qmpphy_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- retimer_ss1_con_sbu_out: endpoint {
- remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
- };
- };
-
- };
- };
-};
-
&i2c8 {
clock-frequency = <400000>;
@@ -1536,13 +1430,6 @@ wake-n-pins {
};
};
- rtmr1_default: rtmr1-reset-n-active-state {
- pins = "gpio176";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
tpad_default: tpad-default-state {
pins = "gpio3";
function = "gpio";
@@ -1564,27 +1451,6 @@ reset-n-pins {
};
};
- usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
- pins = "gpio188";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
- pins = "gpio175";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
- pins = "gpio186";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
mode-pins {
pins = "gpio177";
--
2.48.1
Powered by blists - more mailing lists