linux-kernel - [PATCH v3 0/3] clk: add support for TI CDCE6214

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250410-clk-cdce6214-v3-0-d73cf9ff3d80@pengutronix.de>
Date: Thu, 10 Apr 2025 12:34:55 +0200
From: Sascha Hauer <s.hauer@...gutronix.de>
To: Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org, 
 devicetree@...r.kernel.org, kernel@...gutronix.de, 
 Alvin Šipraga <alsi@...g-olufsen.dk>, 
 Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH v3 0/3] clk: add support for TI CDCE6214

The CDCE6214 is a Ultra-Low Power Clock Generator With One PLL, Four
Differential Outputs, Two Inputs, and Internal EEPROM.

This series adds a common clk framework driver for this chip along with
the dt-bindings document and a small fix needed for the common clk
framework.

Sascha

Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
---
Changes in v3:
- Use string properties instead of int for enums
- Use units from property-units in dtschema
- Link to v2: https://lore.kernel.org/r/20250409-clk-cdce6214-v2-0-40b25b722ecb@pengutronix.de

Changes in v2:
- Use consistent quotes in binding document
- make clock-names an enum to make each clock fully optional
- drop '|' in binding description where not needed
- encode clock input mode into integer
- encode clock output mode into integer
- do not use defines for reg properties
- support setting load capacity for the oscillator via device tree
- support setting Bias current for the oscillator via device tree
- support setting polarities of CMOS outputs via device tree
- fix compatible string in driver
- remove unused struct cdce6214_config
- Link to v1: https://lore.kernel.org/r/20250408-clk-cdce6214-v1-0-bd4e7092a91f@pengutronix.de

---
Sascha Hauer (3):
      clk: make determine_rate optional for non reparenting clocks
      dt-bindings: clock: add TI CDCE6214 binding
      clk: add TI CDCE6214 clock driver

 .../devicetree/bindings/clock/ti,cdce6214.yaml     |  155 +++
 drivers/clk/Kconfig                                |    7 +
 drivers/clk/Makefile                               |    1 +
 drivers/clk/clk-cdce6214.c                         | 1311 ++++++++++++++++++++
 drivers/clk/clk.c                                  |    3 +-
 include/dt-bindings/clock/ti,cdce6214.h            |   24 +
 6 files changed, 1500 insertions(+), 1 deletion(-)
---
base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8
change-id: 20250408-clk-cdce6214-0c74043dc267

Best regards,
-- 
Sascha Hauer <s.hauer@...gutronix.de>