linux-kernel - [PATCH 02/16] staging: gpib: cb7210: fixes multiline comments style

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f4b504b59c500ed5a666422128c90340e8ff4f63.1744438358.git.paul.retourne@orange.fr>
Date: Fri, 11 Apr 2025 23:21:54 -0700
From: Paul Retourné <paul.retourne@...nge.fr>
To: gregkh@...uxfoundation.org,
	dpenkler@...il.com,
	dan.carpenter@...aro.org
Cc: Paul Retourné <paul.retourne@...nge.fr>,
	linux-staging@...ts.linux.dev,
	linux-kernel@...r.kernel.org
Subject: [PATCH 02/16] staging: gpib: cb7210: fixes multiline comments style

Fixes the style of multiline comments to comply with the linux kernel
coding style.

Signed-off-by: Paul Retourné <paul.retourne@...nge.fr>
---
 drivers/staging/gpib/cb7210/cb7210.c |  9 +++++----
 drivers/staging/gpib/cb7210/cb7210.h | 14 ++++++++------
 2 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/gpib/cb7210/cb7210.c b/drivers/staging/gpib/cb7210/cb7210.c
index 6b22a33a8c4f..86aaef001924 100644
--- a/drivers/staging/gpib/cb7210/cb7210.c
+++ b/drivers/staging/gpib/cb7210/cb7210.c
@@ -905,7 +905,8 @@ static int cb7210_init(struct cb7210_priv *cb_priv, struct gpib_board *board)
 	cb7210_write_byte(cb_priv, cb_priv->hs_mode_bits, HS_MODE);
 
 	write_byte(nec_priv, AUX_LO_SPEED, AUXMR);
-	/* set clock register for maximum (20 MHz) driving frequency
+	/*
+	 * set clock register for maximum (20 MHz) driving frequency
 	 * ICR should be set to clock in megahertz (1-15) and to zero
 	 * for clocks faster than 15 MHz (max 20MHz)
 	 */
@@ -1275,9 +1276,9 @@ static int cb_gpib_config(struct pcmcia_device  *link)
 } /* gpib_config */
 
 /*
- *    After a card is removed, gpib_release() will unregister the net
- *   device, and release the PCMCIA configuration.  If the device is
- *   still open, this will be postponed until it is closed.
+ * After a card is removed, gpib_release() will unregister the net
+ * device, and release the PCMCIA configuration.  If the device is
+ * still open, this will be postponed until it is closed.
  */
 
 static void cb_gpib_release(struct pcmcia_device *link)
diff --git a/drivers/staging/gpib/cb7210/cb7210.h b/drivers/staging/gpib/cb7210/cb7210.h
index 2108fe7a8ce5..ea92a81689fa 100644
--- a/drivers/staging/gpib/cb7210/cb7210.h
+++ b/drivers/staging/gpib/cb7210/cb7210.h
@@ -134,7 +134,8 @@ enum bus_status_bits {
 
 /* CBI 488.2 HS control */
 
-/* when both bit 0 and 1 are set, it
+/*
+ * when both bit 0 and 1 are set, it
  *   1 clears the transmit state machine to an initial condition
  *   2 clears any residual interrupts left latched on cbi488.2
  *   3 resets all control bits in HS_MODE to zero
@@ -189,11 +190,12 @@ static inline unsigned int irq_bits(unsigned int irq)
 }
 
 enum cb7210_aux_cmds {
-/* AUX_RTL2 is an undocumented aux command which causes cb7210 to assert
- *	(and keep asserted) local rtl message.  This is used in conjunction
- *	with the (stupid) cb7210 implementation
- *	of the normal nec7210 AUX_RTL aux command, which
- *	causes the rtl message to toggle between on and off.
+/*
+ * AUX_RTL2 is an undocumented aux command which causes cb7210 to assert
+ * (and keep asserted) local rtl message.  This is used in conjunction
+ * with the (stupid) cb7210 implementation
+ * of the normal nec7210 AUX_RTL aux command, which
+ * causes the rtl message to toggle between on and off.
  */
 	AUX_RTL2 = 0xd,
 	AUX_LO_SPEED = 0x40,
-- 
2.49.0