linux-kernel - [PATCH 2/2] arm64: dts: ti: k3-j722s-evm: drop redundant status within serdes0/serdes1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250412052712.927626-3-s-vadapalli@ti.com>
Date: Sat, 12 Apr 2025 10:57:12 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
        <krzk+dt@...nel.org>, <conor+dt@...nel.org>, <u-kumar1@...com>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
        <s-vadapalli@...com>
Subject: [PATCH 2/2] arm64: dts: ti: k3-j722s-evm: drop redundant status within serdes0/serdes1

Since serdes0 and serdes1 are now enabled by default within the SoC
file, it is no longer necessary to enable them in the board file.

Hence, remove the redundant 'status = "okay"' within the serdes0 and
serdes1 device-tree nodes.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---

Hello,

This patch depends on the following series:
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20250408103606.3679505-1-s-vadapalli@ti.com/
as indicated in the cover-letter.

Regards,
Siddharth.

 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 0bf2e1821662..34b9d190800e 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -848,7 +848,6 @@ &serdes_wiz0 {
 };
 
 &serdes0 {
-	status = "okay";
 	serdes0_usb_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <1>;
@@ -863,7 +862,6 @@ &serdes_wiz1 {
 };
 
 &serdes1 {
-	status = "okay";
 	serdes1_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <1>;
-- 
2.34.1