linux-kernel - [PATCH v3 10/15] drm: renesas: rz-du: mipi_dsi: Use mHz for D-PHY frequency calculations

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250418184658.456398-11-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri, 18 Apr 2025 19:46:53 +0100
From: Prabhakar <prabhakar.csengg@...il.com>
To: Andrzej Hajda <andrzej.hajda@...el.com>,
	Neil Armstrong <neil.armstrong@...aro.org>,
	Robert Foss <rfoss@...nel.org>,
	Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
	Jonas Karlman <jonas@...boo.se>,
	Jernej Skrabec <jernej.skrabec@...il.com>,
	David Airlie <airlied@...il.com>,
	Simona Vetter <simona@...ll.ch>,
	Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
	Maxime Ripard <mripard@...nel.org>,
	Thomas Zimmermann <tzimmermann@...e.de>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Biju Das <biju.das.jz@...renesas.com>,
	Geert Uytterhoeven <geert+renesas@...der.be>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...nel.org>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	Magnus Damm <magnus.damm@...il.com>
Cc: dri-devel@...ts.freedesktop.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-renesas-soc@...r.kernel.org,
	linux-clk@...r.kernel.org,
	Prabhakar <prabhakar.csengg@...il.com>,
	Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH v3 10/15] drm: renesas: rz-du: mipi_dsi: Use mHz for D-PHY frequency calculations

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>

Pass the HSFREQ in milli-Hz to the `dphy_init()` callback to improve
precision, especially for the RZ/V2H(P) SoC, where PLL dividers require
high accuracy.

These changes prepare the driver for upcoming RZ/V2H(P) SoC support.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
v2->v3:
- Replaced `unsigned long long` with `u64`
- Replaced *_mhz with *_millihz` in functions

v1->v2:
- No changes
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 564c15b27c31..0204af85fc64 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -33,7 +33,7 @@
 struct rzg2l_mipi_dsi;
 
 struct rzg2l_mipi_dsi_hw_info {
-	int (*dphy_init)(struct rzg2l_mipi_dsi *dsi, unsigned long hsfreq);
+	int (*dphy_init)(struct rzg2l_mipi_dsi *dsi, u64 hsfreq_millihz);
 	void (*dphy_exit)(struct rzg2l_mipi_dsi *dsi);
 	u32 phy_reg_offset;
 	u32 link_reg_offset;
@@ -203,8 +203,9 @@ static u32 rzg2l_mipi_dsi_link_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
  */
 
 static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
-				    unsigned long hsfreq)
+				    u64 hsfreq_millihz)
 {
+	unsigned long hsfreq = DIV_ROUND_CLOSEST_ULL(hsfreq_millihz, KILO);
 	const struct rzg2l_mipi_dsi_timings *dphy_timings;
 	unsigned int i;
 	u32 dphyctrl0;
@@ -277,6 +278,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 				  const struct drm_display_mode *mode)
 {
 	unsigned long hsfreq, vclk_rate;
+	u64 hsfreq_millihz;
 	unsigned int bpp;
 	u32 txsetr;
 	u32 clstptsetr;
@@ -305,9 +307,9 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	 */
 	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
 	vclk_rate = clk_get_rate(dsi->vclk);
-	hsfreq = DIV_ROUND_CLOSEST_ULL(vclk_rate * bpp, dsi->lanes);
+	hsfreq_millihz = DIV_ROUND_CLOSEST_ULL(vclk_rate * bpp * KILO * 1ULL, dsi->lanes);
 
-	ret = dsi->info->dphy_init(dsi, hsfreq);
+	ret = dsi->info->dphy_init(dsi, hsfreq_millihz);
 	if (ret < 0)
 		goto err_phy;
 
@@ -315,6 +317,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	txsetr = TXSETR_DLEN | TXSETR_NUMLANEUSE(dsi->lanes - 1) | TXSETR_CLEN;
 	rzg2l_mipi_dsi_link_write(dsi, TXSETR, txsetr);
 
+	hsfreq = DIV_ROUND_CLOSEST_ULL(hsfreq_millihz, KILO);
 	/*
 	 * Global timings characteristic depends on high speed Clock Frequency
 	 * Currently MIPI DSI-IF just supports maximum FHD@60 with:
@@ -778,7 +781,7 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
 	 * mode->clock and format are not available. So initialize DPHY with
 	 * timing parameters for 80Mbps.
 	 */
-	ret = dsi->info->dphy_init(dsi, 80000000);
+	ret = dsi->info->dphy_init(dsi, 80000000ULL * KILO);
 	if (ret < 0)
 		goto err_phy;
 
-- 
2.49.0