linux-kernel - [PATCH v2 7/9] serial: qcom-geni: move clock-rate logic to separate function

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250418151235.27787-8-quic_ptalari@quicinc.com>
Date: Fri, 18 Apr 2025 20:42:33 +0530
From: Praveen Talari <quic_ptalari@...cinc.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby
	<jirislaby@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski
	<krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Bjorn Andersson
	<andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>,
        Viresh Kumar
	<vireshk@...nel.org>, Nishanth Menon <nm@...com>,
        Stephen Boyd
	<sboyd@...nel.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Praveen Talari
	<quic_ptalari@...cinc.com>,
        <linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-serial@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-pm@...r.kernel.org>
CC: <psodagud@...cinc.com>, <djaggi@...cinc.com>, <quic_msavaliy@...cinc.com>,
        <quic_vtanuku@...cinc.com>, <quic_arandive@...cinc.com>,
        <quic_mnaresh@...cinc.com>, <quic_shazhuss@...cinc.com>
Subject: [PATCH v2 7/9] serial: qcom-geni: move clock-rate logic to separate function

Facilitates future modifications within the new function,
leading to better readability and maintainability of the code.

Move the code that handles the actual logic of clock-rate
calculations to a separate function geni_serial_set_rate()
which enhances code readability.

Signed-off-by: Praveen Talari <quic_ptalari@...cinc.com>
---
v1 -> v2
- resolved build warnings for datatype format specifiers
- removed double spaces in log
---
 drivers/tty/serial/qcom_geni_serial.c | 62 +++++++++++++++++----------
 1 file changed, 39 insertions(+), 23 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 2cd2085473f3..60afee3884a6 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1283,27 +1283,14 @@ static unsigned long get_clk_div_rate(struct clk *clk, unsigned int baud,
 	return ser_clk;
 }
 
-static void qcom_geni_serial_set_termios(struct uart_port *uport,
-					 struct ktermios *termios,
-					 const struct ktermios *old)
+static int geni_serial_set_rate(struct uart_port *uport, unsigned long baud)
 {
-	unsigned int baud;
-	u32 bits_per_char;
-	u32 tx_trans_cfg;
-	u32 tx_parity_cfg;
-	u32 rx_trans_cfg;
-	u32 rx_parity_cfg;
-	u32 stop_bit_len;
-	unsigned int clk_div;
-	u32 ser_clk_cfg;
 	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	unsigned long clk_rate;
-	u32 ver, sampling_rate;
 	unsigned int avg_bw_core;
-	unsigned long timeout;
-
-	/* baud rate */
-	baud = uart_get_baud_rate(uport, termios, old, 300, 4000000);
+	unsigned int clk_div;
+	u32 ver, sampling_rate;
+	u32 ser_clk_cfg;
 
 	sampling_rate = UART_OVERSAMPLING;
 	/* Sampling rate is halved for IP versions >= 2.5 */
@@ -1315,13 +1302,13 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 		sampling_rate, &clk_div);
 	if (!clk_rate) {
 		dev_err(port->se.dev,
-			"Couldn't find suitable clock rate for %u\n",
+			"Couldn't find suitable clock rate for %lu\n",
 			baud * sampling_rate);
-		return;
+		return -EINVAL;
 	}
 
-	dev_dbg(port->se.dev, "desired_rate = %u, clk_rate = %lu, clk_div = %u\n",
-			baud * sampling_rate, clk_rate, clk_div);
+	dev_dbg(port->se.dev, "desired_rate = %lu, clk_rate = %lu, clk_div = %u\n",
+		baud * sampling_rate, clk_rate, clk_div);
 
 	uport->uartclk = clk_rate;
 	port->clk_rate = clk_rate;
@@ -1339,6 +1326,37 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 	port->se.icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(baud);
 	geni_icc_set_bw(&port->se);
 
+	writel(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG);
+	writel(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG);
+	return 0;
+}
+
+static void qcom_geni_serial_set_termios(struct uart_port *uport,
+					 struct ktermios *termios,
+					 const struct ktermios *old)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+	unsigned int baud;
+	unsigned long timeout;
+	u32 bits_per_char;
+	u32 tx_trans_cfg;
+	u32 tx_parity_cfg;
+	u32 rx_trans_cfg;
+	u32 rx_parity_cfg;
+	u32 stop_bit_len;
+	int ret = 0;
+
+	/* baud rate */
+	baud = uart_get_baud_rate(uport, termios, old, 300, 4000000);
+
+	ret = geni_serial_set_rate(uport, baud);
+	if (ret) {
+		dev_err(port->se.dev,
+			"%s: Failed to set baud:%u ret:%d\n",
+			__func__, baud, ret);
+		return;
+	}
+
 	/* parity */
 	tx_trans_cfg = readl(uport->membase + SE_UART_TX_TRANS_CFG);
 	tx_parity_cfg = readl(uport->membase + SE_UART_TX_PARITY_CFG);
@@ -1406,8 +1424,6 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 	writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
 	writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
 	writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
-	writel(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG);
-	writel(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG);
 }
 
 #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
-- 
2.17.1