[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250419-op6-tri-state-v5-2-443127078517@ixit.cz>
Date: Sat, 19 Apr 2025 21:46:25 +0200
From: David Heidelberg via B4 Relay <devnull+david.ixit.cz@...nel.org>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Jonathan Corbet <corbet@....net>, Jiri Kosina <jikos@...nel.org>,
Benjamin Tissoires <bentiss@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-input@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, Gergo Koteles <soyer@....hu>,
Casey Connolly <casey@...nolly.tech>, David Heidelberg <david@...t.cz>,
Konrad Dybcio <konradybcio@...nel.org>
Subject: [PATCH v5 2/2] arm64: dts: qcom: sdm845-oneplus: Add alert-slider
From: Gergo Koteles <soyer@....hu>
The alert-slider is a tri-state sound profile switch found on the
OnePlus 6, Android maps the states to "silent", "vibrate" and "ring".
Expose them as ABS_SND_PROFILE events.
The previous GPIO numbers were wrong. Update them to the correct ones.
Co-developed-by: Casey Connolly <casey@...nolly.tech>
Signed-off-by: Casey Connolly <casey@...nolly.tech>
Signed-off-by: Gergo Koteles <soyer@....hu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Signed-off-by: David Heidelberg <david@...t.cz>
---
.../arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 39 ++++++++++++++++++++--
1 file changed, 37 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 8a0f154bffc3d55ae2134ef28cb7653dde702552..9a508b3149bef50c0ed897dec3c01a3f08712e85 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -21,6 +21,41 @@
/delete-node/ &rmtfs_mem;
/ {
+ alert-slider {
+ compatible = "gpio-keys";
+ label = "Alert slider";
+
+ pinctrl-0 = <&alert_slider_default>;
+ pinctrl-names = "default";
+
+ switch-top {
+ label = "Silent";
+ linux,input-type = <EV_ABS>;
+ linux,code = <ABS_SND_PROFILE>;
+ linux,input-value = <SND_PROFILE_SILENT>;
+ gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ };
+
+ switch-middle {
+ label = "Vibrate";
+ linux,input-type = <EV_ABS>;
+ linux,code = <ABS_SND_PROFILE>;
+ linux,input-value = <SND_PROFILE_VIBRATE>;
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ };
+
+ switch-bottom {
+ label = "Ring";
+ linux,input-type = <EV_ABS>;
+ linux,code = <ABS_SND_PROFILE>;
+ linux,input-value = <SND_PROFILE_RING>;
+ gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ };
+ };
+
aliases {
serial0 = &uart9;
serial1 = &uart6;
@@ -799,8 +834,8 @@ hall_sensor_default: hall-sensor-default-state {
bias-disable;
};
- tri_state_key_default: tri-state-key-default-state {
- pins = "gpio40", "gpio42", "gpio26";
+ alert_slider_default: alert-slider-default-state {
+ pins = "gpio126", "gpio52", "gpio24";
function = "gpio";
drive-strength = <2>;
bias-disable;
--
2.49.0
Powered by blists - more mailing lists