linux-kernel - [PATCH v3 1/3] dt-bindings: PCI: qcom: Move phy, wake & reset gpio's to root port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250419-perst-v3-1-1afec3c4ea62@oss.qualcomm.com>
Date: Sat, 19 Apr 2025 10:49:24 +0530
From: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
To: Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>,
        cros-qcom-dts-watchers@...omium.org
Cc: linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        quic_vbadigan@...cinc.com, quic_mrana@...cinc.com,
        Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
Subject: [PATCH v3 1/3] dt-bindings: PCI: qcom: Move phy, wake & reset
 gpio's to root port

Move the phy, phy-names, wake-gpio's to the pcie root port node instead of
the bridge node, as agreed upon in multiple places one instance is[1].

Update the qcom,pcie-common.yaml to include the phy, phy-names, and
wake-gpios properties in the root port node. There is already reset-gpios
defined for PERST# in pci-bus-common.yaml, start using that property
instead of perst-gpio.

For backward compatibility, do not remove any existing properties in the
bridge node.

[1] https://lore.kernel.org/linux-pci/20241211192014.GA3302752@bhelgaas/

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
---
 .../devicetree/bindings/pci/qcom,pcie-common.yaml  | 36 ++++++++++++++++++++--
 .../devicetree/bindings/pci/qcom,pcie-sc7280.yaml  | 16 +++++++---
 2 files changed, 46 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
index 0480c58f7d998adbac4c6de20cdaec945b3bab21..e5f60faa18ad68a29900a66fbfcba3d4f8e88e7b 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
@@ -51,10 +51,18 @@ properties:
 
   phys:
     maxItems: 1
+    deprecated: true
+    description:
+      This property is deprecated, instead of referencing this property from
+      the controller node, use the property from the PCIe root port node.
 
   phy-names:
     items:
       - const: pciephy
+    deprecated: true
+    description:
+      Phandle to the register map node. This property is deprecated, and not
+      required to add in the root port also, as the root port has only one phy.
 
   power-domains:
     maxItems: 1
@@ -71,12 +79,18 @@ properties:
     maxItems: 12
 
   perst-gpios:
-    description: GPIO controlled connection to PERST# signal
+    description: GPIO controlled connection to PERST# signal. This property is
+      deprecated, instead of referencing this property from the controller node,
+      use the reset-gpios property from the root port node.
     maxItems: 1
+    deprecated: true
 
   wake-gpios:
-    description: GPIO controlled connection to WAKE# signal
+    description: GPIO controlled connection to WAKE# signal. This property is
+      deprecated, instead of referencing this property from the controller node,
+      use the property from the PCIe root port node.
     maxItems: 1
+    deprecated: true
 
   vddpe-3v3-supply:
     description: PCIe endpoint power supply
@@ -85,6 +99,24 @@ properties:
   opp-table:
     type: object
 
+patternProperties:
+  "^pcie@":
+    type: object
+    $ref: /schemas/pci/pci-pci-bridge.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+
+      phys:
+        maxItems: 1
+
+      wake-gpios:
+        description: GPIO controlled connection to WAKE# signal
+        maxItems: 1
+
+    unevaluatedProperties: false
+
 required:
   - reg
   - reg-names
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
index 76cb9fbfd476fb0412217c68bd8db44a51c7d236..eb70cc6b6618af43fb03e124db20e2ade26a95ae 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -162,9 +162,6 @@ examples:
             iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
                         <0x100 &apps_smmu 0x1c81 0x1>;
 
-            phys = <&pcie1_phy>;
-            phy-names = "pciephy";
-
             pinctrl-names = "default";
             pinctrl-0 = <&pcie1_clkreq_n>;
 
@@ -173,7 +170,18 @@ examples:
             resets = <&gcc GCC_PCIE_1_BCR>;
             reset-names = "pci";
 
-            perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
             vddpe-3v3-supply = <&pp3300_ssd>;
+            pcie1_port0: pcie@0 {
+                device_type = "pci";
+                reg = <0x0 0x0 0x0 0x0 0x0>;
+                bus-range = <0x01 0xff>;
+
+                #address-cells = <3>;
+                #size-cells = <2>;
+                ranges;
+                phys = <&pcie1_phy>;
+
+                reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+            };
         };
     };

-- 
2.34.1