| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250421-upstream-lt3074-v3-2-71636322f9fe@analog.com>
Date: Mon, 21 Apr 2025 20:18:19 +0800
From: Cedric Encarnacion <cedricjustine.encarnacion@...log.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Jean Delvare <jdelvare@...e.com>,
Guenter
Roeck <linux@...ck-us.net>, Jonathan Corbet <corbet@....net>,
Delphine CC
Chiu <Delphine_CC_Chiu@...ynn.com>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-hwmon@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-i2c@...r.kernel.org>,
Cedric Encarnacion
<cedricjustine.encarnacion@...log.com>
Subject: [PATCH v3 2/2] hwmon: (pmbus/lt3074): add support for lt3074
Add hardware monitoring and regulator support for LT3074. The LT3074 is an
ultrafast, ultralow noise 3A, 5.5V dropout linear regulator. The PMBus
serial interface allows telemetry for input/output voltage, bias voltage,
output current, and die temperature.
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@...log.com>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/lt3074.rst | 72 ++++++++++++++++++++++++
MAINTAINERS | 2 +
drivers/hwmon/pmbus/Kconfig | 18 ++++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/lt3074.c | 122 +++++++++++++++++++++++++++++++++++++++++
6 files changed, 216 insertions(+)
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index da5895115724df35416b88fcd6edb13c2d5b07f2..d17f942d8535359e942ae6359374431c1976afef 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -126,6 +126,7 @@ Hardware Monitoring Kernel Drivers
lm95234
lm95245
lochnagar
+ lt3074
lt7182s
ltc2992
ltc2945
diff --git a/Documentation/hwmon/lt3074.rst b/Documentation/hwmon/lt3074.rst
new file mode 100644
index 0000000000000000000000000000000000000000..234f369153cf1374b8c7eaa2ed93358ac141fdf9
--- /dev/null
+++ b/Documentation/hwmon/lt3074.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver lt3074
+====================
+
+Supported chips:
+
+ * Analog Devices LT3074
+
+ Prefix: 'lt3074'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/lt3074.html
+
+Authors: Cedric Encarnacion <cedricjustine.encarnacion@...log.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices LT3074 Linear
+Regulator with PMBus interface.
+
+The LT3074 is a low voltage, ultra-low noise and ultra-fast transient
+response linear regulator with PMBus serial interface. PMBus telemetry
+feature provides information regarding the output voltage and current,
+input voltage, bias voltage and die temperature.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate
+the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst
+for details.
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+Sysfs entries
+-------------
+
+======================= =======================================================
+in1_label "vin"
+in1_input Measured input voltage
+in1_max Input overvoltage warning limit
+in1_max_alarm Input overvoltage warning status
+in1_min Input undervoltage warning limit
+in1_min_alarm Input undervoltage warning status
+in2_label "vmon"
+in2_input Measured bias voltage
+in2_max Bias overvoltage warning limit
+in2_min Bias undervoltage warning limit
+in3_label "vout1"
+in3_input Measured output voltage
+in3_max Output overvoltage warning limit
+in3_max_alarm Output overvoltage warning status
+in3_min Output undervoltage warning limit
+in3_min_alarm Output undervoltage warning status
+curr1_label "iout1"
+curr1_input Measured output current.
+curr1_crit Output overcurrent fault limit
+curr1_crit_alarm Output overcurrent fault status
+temp1_input Measured temperature
+temp1_max Maximum temperature limit
+temp1_max_alarm Overtemperature warning status
+======================= =======================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index cfbf4dca400e03fcfa34ac78051fdcd815477799..cc61b2dfa0bee28a35bb9e0200095f549b557a73 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13989,6 +13989,8 @@ L: linux-hwmon@...r.kernel.org
S: Supported
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml
+F: Documentation/hwmon/lt3074.rst
+F: drivers/hwmon/pmbus/lt3074.c
LTC1660 DAC DRIVER
M: Marcus Folkesson <marcus.folkesson@...il.com>
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index c9b3c314998234e639db1770c18c6f75fa037d25..441f984a859dd935e5248793f1bf54204ce2c371 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -218,6 +218,24 @@ config SENSORS_LM25066_REGULATOR
If you say yes here you get regulator support for National
Semiconductor LM25066, LM5064, and LM5066.
+config SENSORS_LT3074
+ tristate "Analog Devices LT3074"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices LT3074.
+
+ This driver can also be built as a module. If so, the module will
+ be called lt3074.
+
+config SENSORS_LT3074_REGULATOR
+ tristate "Regulator support for LT3074"
+ depends on SENSORS_LT3074 && REGULATOR
+ help
+ If you say yes here you get regulator support for Analog Devices
+ LT3074. The LT3074 is a low voltage, ultralow noise, high PSRR,
+ dropout linear regulator. The device supplies up to 3A with a
+ typical dropout voltage of 45mV.
+
config SENSORS_LT7182S
tristate "Analog Devices LT7182S"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 56f128c4653e3087ecd3c2fd859bb0bd9ff10a3d..29cd8a3317d29f85113b6a79904d0d8cb48fc61b 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SENSORS_IR38064) += ir38064.o
obj-$(CONFIG_SENSORS_IRPS5401) += irps5401.o
obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o
obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
+obj-$(CONFIG_SENSORS_LT3074) += lt3074.o
obj-$(CONFIG_SENSORS_LT7182S) += lt7182s.o
obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o
diff --git a/drivers/hwmon/pmbus/lt3074.c b/drivers/hwmon/pmbus/lt3074.c
new file mode 100644
index 0000000000000000000000000000000000000000..3704dbe7b54ab8beaf0965463fe6400207d0bb98
--- /dev/null
+++ b/drivers/hwmon/pmbus/lt3074.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardware monitoring driver for Analog Devices LT3074
+ *
+ * Copyright (C) 2025 Analog Devices, Inc.
+ */
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+
+#include "pmbus.h"
+
+#define LT3074_MFR_READ_VBIAS 0xc6
+#define LT3074_MFR_BIAS_OV_WARN_LIMIT 0xc7
+#define LT3074_MFR_BIAS_UV_WARN_LIMIT 0xc8
+#define LT3074_MFR_SPECIAL_ID 0xe7
+
+#define LT3074_SPECIAL_ID_VALUE 0x1c1d
+
+static const struct regulator_desc __maybe_unused lt3074_reg_desc[] = {
+ PMBUS_REGULATOR_ONE("regulator"),
+};
+
+static int lt3074_read_word_data(struct i2c_client *client, int page,
+ int phase, int reg)
+{
+ switch (reg) {
+ case PMBUS_VIRT_READ_VMON:
+ return pmbus_read_word_data(client, page, phase,
+ LT3074_MFR_READ_VBIAS);
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ return pmbus_read_word_data(client, page, phase,
+ LT3074_MFR_BIAS_UV_WARN_LIMIT);
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ return pmbus_read_word_data(client, page, phase,
+ LT3074_MFR_BIAS_OV_WARN_LIMIT);
+ default:
+ return -ENODATA;
+ }
+}
+
+static int lt3074_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ switch (reg) {
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ return pmbus_write_word_data(client, 0,
+ LT3074_MFR_BIAS_UV_WARN_LIMIT,
+ word);
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ return pmbus_write_word_data(client, 0,
+ LT3074_MFR_BIAS_OV_WARN_LIMIT,
+ word);
+ default:
+ return -ENODATA;
+ }
+}
+
+static struct pmbus_driver_info lt3074_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_VMON |
+ PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+ .read_word_data = lt3074_read_word_data,
+ .write_word_data = lt3074_write_word_data,
+#if IS_ENABLED(CONFIG_SENSORS_LT3074_REGULATOR)
+ .num_regulators = 1,
+ .reg_desc = lt3074_reg_desc,
+#endif
+};
+
+static int lt3074_probe(struct i2c_client *client)
+{
+ int ret;
+ struct device *dev = &client->dev;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_word_data(client, LT3074_MFR_SPECIAL_ID);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to read ID\n");
+
+ if (ret != LT3074_SPECIAL_ID_VALUE)
+ return dev_err_probe(dev, -ENODEV, "ID mismatch\n");
+
+ return pmbus_do_probe(client, <3074_info);
+}
+
+static const struct i2c_device_id lt3074_id[] = {
+ { "lt3074", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, lt3074_id);
+
+static const struct of_device_id __maybe_unused lt3074_of_match[] = {
+ { .compatible = "adi,lt3074" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, lt3074_of_match);
+
+static struct i2c_driver lt3074_driver = {
+ .driver = {
+ .name = "lt3074",
+ .of_match_table = of_match_ptr(lt3074_of_match),
+ },
+ .probe = lt3074_probe,
+ .id_table = lt3074_id,
+};
+module_i2c_driver(lt3074_driver);
+
+MODULE_AUTHOR("Cedric Encarnacion <cedricjustine.encarnacion@...log.com>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices LT3074");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("PMBUS");
--
2.39.5
Powered by blists - more mailing lists