| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aAdEFfWcTUC0DvYU@tom-desktop> Date: Tue, 22 Apr 2025 09:24:05 +0200 From: Tommaso Merciai <tommaso.merciai.xr@...renesas.com> To: Laurent Pinchart <laurent.pinchart@...asonboard.com> Cc: tomm.merciai@...il.com, linux-renesas-soc@...r.kernel.org, linux-media@...r.kernel.org, biju.das.jz@...renesas.com, prabhakar.mahadev-lad.rj@...renesas.com, Mauro Carvalho Chehab <mchehab@...nel.org>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Geert Uytterhoeven <geert+renesas@...der.be>, Magnus Damm <magnus.damm@...il.com>, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH v7 00/17] media: rzg2l-cru: Add support for RZ/G3E (CSI2, CRU) Hi Laurent, Thanks for your review. On Mon, Apr 21, 2025 at 06:11:08PM +0300, Laurent Pinchart wrote: > Hi Tommaso, > > Thank you for the patches. > > On Fri, Apr 11, 2025 at 07:05:28PM +0200, Tommaso Merciai wrote: > > Dear All, > > > > In preparation of supporting the CRU/CSI2 IPs found into the Renesas RZ/G3E > > SoC, this series adds driver/dt-bindings support. > > This adds also some minor fixes into rzg2l-csi2 and rzg2l-core drivers. > > > > The series was tested in an out of tree branch with the following hw pipeline: > > > > ov5645 image sensor (Coral Camera) -> rzg3e CSI2 -> rzg3e CRU > > imx219 image sensor (Pi PiNoir Camera Module V2.1) -> rzg3e CSI2 -> rzg3e CRU > > > > base commit: 7702d0130dc00 (tag: next-20250408) > > As far as I can tell, the series has been fully reviewed. I'll collect > the patches, run them through CI, and then send a pull request. > > > ------ > > Some logs: > > > > root@...rc-rzg3e:~# media-ctl -p > > Media controller API version 6.15.0 > > > > Media device information > > ------------------------ > > driver rzg2l_cru > > model renesas,r9a09g047-cru > > serial > > bus info platform:16000000.video > > hw revision 0x0 > > driver version 6.15.0 > > > > Device topology > > - entity 1: csi-16000400.csi2 (2 pads, 2 links, 0 routes) > > type V4L2 subdev subtype Unknown flags 0 > > device node name /dev/v4l-subdev0 > > pad0: Sink > > [stream:0 fmt:UYVY8_1X16/1280x960 field:none colorspace:srgb] > > <- "ov5645 0-003c":0 [ENABLED,IMMUTABLE] > > pad1: Source > > [stream:0 fmt:UYVY8_1X16/1280x960 field:none colorspace:srgb] > > -> "cru-ip-16000000.video":0 [ENABLED,IMMUTABLE] > > > > - entity 4: cru-ip-16000000.video (2 pads, 2 links, 0 routes) > > type V4L2 subdev subtype Unknown flags 0 > > device node name /dev/v4l-subdev1 > > pad0: Sink > > [stream:0 fmt:UYVY8_1X16/1280x960 field:none] > > <- "csi-16000400.csi2":1 [ENABLED,IMMUTABLE] > > pad1: Source > > [stream:0 fmt:UYVY8_1X16/1280x960 field:none] > > -> "CRU output":0 [ENABLED,IMMUTABLE] > > > > - entity 7: ov5645 0-003c (1 pad, 1 link, 0 routes) > > type V4L2 subdev subtype Sensor flags 0 > > device node name /dev/v4l-subdev2 > > pad0: Source > > [stream:0 fmt:UYVY8_1X16/1280x960 field:none colorspace:srgb > > crop:(0,0)/1280x960] > > -> "csi-16000400.csi2":0 [ENABLED,IMMUTABLE] > > > > - entity 17: CRU output (1 pad, 1 link) > > type Node subtype V4L flags 0 > > device node name /dev/video0 > > pad0: Sink > > <- "cru-ip-16000000.video":1 [ENABLED,IMMUTABLE] > > > > root@...rc-rzg3e:~# v4l2-compliance -d /dev/v4l-subdev0 > > For the next submission, you can use > > $ v4l2-compliance -m /dev/media0 > > to test all subdevs and video nodes. Will do. Thanks for sharing this. Thanks & Regards, Tommaso > > > v4l2-compliance 1.26.1-5142, 64 bits, 64-bit time_t > > v4l2-compliance SHA: 4aee01a02792 2023-12-12 21:40:38 > > > > Compliance test for device /dev/v4l-subdev0: > > > > Driver Info: > > Driver version : 6.15.0 > > Capabilities : 0x00[ 580.151532] csi-16000400.csi2: ================= START STATUS ================= > > 000000 > > > > Requir[ 580.151532] csi-16000400.csi2: ================= START STATUS ================= > > ed ioctls: > > tes[ 580.168711] csi-16000400.csi2: ================== END STATUS ================== > > t VIDIOC_SUDBEV_[ 580.168711] csi-16000400.csi2: ================== END STATUS ================== > > QUERYCAP: OK > > test invalid ioctls: OK > > > > Allow for multiple opens: > > test second /dev/v4l-subdev0 open: OK > > test VIDIOC_SUBDEV_QUERYCAP: OK > > test for unlimited opens: OK > > > > Debug ioctls: > > test VIDIOC_LOG_STATUS: OK (Not Supported) > > > > Input ioctls: > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > > > Output ioctls: > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > Input/Output configuration ioctls: > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > Control ioctls: > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > > test VIDIOC_QUERYCTRL: OK (Not Supported) > > test VIDIOC_G/S_CTRL: OK (Not Supported) > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > Standard Controls: 0 Private Controls: 0 > > > > Format ioctls: > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > > test VIDIOC_G/S_PARM: OK (Not Supported) > > test VIDIOC_G_FBUF: OK (Not Supported) > > test VIDIOC_G_FMT: OK (Not Supported) > > test VIDIOC_TRY_FMT: OK (Not Supported) > > test VIDIOC_S_FMT: OK (Not Supported) > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > test Cropping: OK (Not Supported) > > test Composing: OK (Not Supported) > > test Scaling: OK (Not Supported) > > > > Codec ioctls: > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > > > Buffer ioctls: > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > > test CREATE_BUFS maximum buffers: OK > > test VIDIOC_EXPBUF: OK (Not Supported) > > test Requests: OK (Not Supported) > > > > Total for device /dev/v4l-subdev0: 44, Succeeded: 44, Failed: 0, Warnings: 0 > > > > root@...rc-rzg3e:~# v4l2-compliance -d /dev/v4l-subdev1 > > v4l2-compliance 1.26.1-5142, 64 [ 592.022784] cru-ip-16000000.video: ================= START STATUS ================= > > bits, 64-bit tim[ 592.022784] cru-ip-16000000.video: ================= START STATUS ================= > > e_t > > v4l2-compli[ 592.040565] cru-ip-16000000.video: ================== END STATUS ================== > > ance SHA: 4aee01[ 592.040565] cru-ip-16000000.video: ================== END STATUS ================== > > a02792 2023-12-12 21:40:38 > > > > Compliance test for rzg2l_cru device /dev/v4l-subdev1: > > > > Driver Info: > > Driver version : 6.15.0 > > Capabilities : 0x00000000 > > Media Driver Info: > > Driver name : rzg2l_cru > > Model : renesas,r9a09g047-cru > > Serial : > > Bus info : platform:16000000.video > > Media version : 6.15.0 > > Hardware revision: 0x00000000 (0) > > Driver version : 6.15.0 > > Interface Info: > > ID : 0x0300000d > > Type : V4L Sub-Device > > Entity Info: > > ID : 0x00000004 (4) > > Name : cru-ip-16000000.video > > Function : Video Pixel Formatter > > Pad 0x01000005 : 0: Sink, Must Connect > > Link 0x02000015: from remote pad 0x1000003 of entity 'csi-16000400.csi2' (Video Interface Bridge): Data, Enabled, Immutable > > Pad 0x01000006 : 1: Source, Must Connect > > Link 0x02000017: to remote pad 0x1000012 of entity 'CRU output' (V4L2 I/O): Data, Enabled, Immutable > > > > Required ioctls: > > test MC information (see 'Media Driver Info' above): OK > > test VIDIOC_SUDBEV_QUERYCAP: OK > > test invalid ioctls: OK > > > > Allow for multiple opens: > > test second /dev/v4l-subdev1 open: OK > > test VIDIOC_SUBDEV_QUERYCAP: OK > > test for unlimited opens: OK > > > > Debug ioctls: > > test VIDIOC_LOG_STATUS: OK (Not Supported) > > > > Input ioctls: > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > > > Output ioctls: > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > Input/Output configuration ioctls: > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > Sub-Device ioctls (Sink Pad 0): > > Try Stream 0 > > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK > > test Try VIDIOC_SUBDEV_G/S_FMT: OK > > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > > Active Stream 0 > > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK > > test Active VIDIOC_SUBDEV_G/S_FMT: OK > > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > > > Sub-Device ioctls (Source Pad 1): > > Try Stream 0 > > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK > > test Try VIDIOC_SUBDEV_G/S_FMT: OK > > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > > Active Stream 0 > > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK > > test Active VIDIOC_SUBDEV_G/S_FMT: OK > > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > > > Control ioctls: > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > > test VIDIOC_QUERYCTRL: OK (Not Supported) > > test VIDIOC_G/S_CTRL: OK (Not Supported) > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > Standard Controls: 0 Private Controls: 0 > > > > Format ioctls: > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > > test VIDIOC_G/S_PARM: OK (Not Supported) > > test VIDIOC_G_FBUF: OK (Not Supported) > > test VIDIOC_G_FMT: OK (Not Supported) > > test VIDIOC_TRY_FMT: OK (Not Supported) > > test VIDIOC_S_FMT: OK (Not Supported) > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > test Cropping: OK (Not Supported) > > test Composing: OK (Not Supported) > > test Scaling: OK (Not Supported) > > > > Codec ioctls: > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > > > Buffer ioctls: > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > > test CREATE_BUFS maximum buffers: OK > > test VIDIOC_EXPBUF: OK (Not Supported) > > test Requests: OK (Not Supported) > > > > Total for rzg2l_cru device /dev/v4l-subdev1: 59, Succeeded: 59, Failed: 0, Warnings: 0 > > > > root@...rc-rzg3e:~# v4l2-compliance -d /dev/v4l-subdev2 > > v4l2-compliance 1.26.1-5142, 64 [ 602.158977] ov5645 0-003c: ================= START STATUS ================= > > bits, 64-bit tim[ 602.158977] ov5645 0-003c: ================= START STATUS ================= > > e_t > > v4l2-compli[ 602.175529] ov5645 0-003c: ================== END STATUS ================== > > ance SHA: 4aee01[ 602.175529] ov5645 0-003c: ================== END STATUS ================== > > a02792 2023-12-12 21:40:38 > > > > Compliance test for device /dev/v4l-subdev2: > > > > Driver Info: > > Driver version : 6.15.0 > > Capabilities : 0x00000000 > > > > Required ioctls: > > test VIDIOC_SUDBEV_QUERYCAP: OK > > test invalid ioctls: OK > > > > Allow for multiple opens: > > test second /dev/v4l-subdev2 open: OK > > test VIDIOC_SUBDEV_QUERYCAP: OK > > test for unlimited opens: OK > > > > Debug ioctls: > > test VIDIOC_LOG_STATUS: OK (Not Supported) > > > > Input ioctls: > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > > > Output ioctls: > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > Input/Output configuration ioctls: > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > Control ioctls: > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > > test VIDIOC_QUERYCTRL: OK > > test VIDIOC_G/S_CTRL: OK > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > Standard Controls: 12 Private Controls: 0 > > > > Format ioctls: > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > > test VIDIOC_G/S_PARM: OK (Not Supported) > > test VIDIOC_G_FBUF: OK (Not Supported) > > test VIDIOC_G_FMT: OK (Not Supported) > > test VIDIOC_TRY_FMT: OK (Not Supported) > > test VIDIOC_S_FMT: OK (Not Supported) > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > test Cropping: OK (Not Supported) > > test Composing: OK (Not Supported) > > test Scaling: OK (Not Supported) > > > > Codec ioctls: > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > > > Buffer ioctls: > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > > test CREATE_BUFS maximum buffers: OK > > test VIDIOC_EXPBUF: OK (Not Supported) > > test Requests: OK (Not Supported) > > > > Total for device /dev/v4l-subdev2: 44, Succeeded: 44, Failed: 0, Warnings: 0 > > > > Thanks & Regards, > > Tommaso > > > > Lad Prabhakar (12): > > media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/V2H(P) SoC > > media: rzg2l-cru: csi2: Use local variable for struct device in > > rzg2l_csi2_probe() > > media: rzg2l-cru: rzg2l-core: Use local variable for struct device in > > rzg2l_cru_probe() > > media: rzg2l-cru: csi2: Introduce SoC-specific D-PHY handling > > media: rzg2l-cru: csi2: Add support for RZ/V2H(P) SoC > > media: rzg2l-cru: Add register mapping support > > media: rzg2l-cru: Pass resolution limits via OF data > > media: rzg2l-cru: Add image_conv offset to OF data > > media: rzg2l-cru: Add IRQ handler to OF data > > media: rzg2l-cru: Add function pointer to check if FIFO is empty > > media: rzg2l-cru: Add function pointer to configure CSI > > media: rzg2l-cru: Add support for RZ/G3E SoC > > > > Tommaso Merciai (5): > > media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/G3E CSI-2 > > block > > media: dt-bindings: renesas,rzg2l-cru: Document Renesas RZ/G3E SoC > > media: rzg2l-cru: csi2: Use devm_pm_runtime_enable() > > media: rzg2l-cru: rzg2l-core: Use devm_pm_runtime_enable() > > media: rzg2l-cru: csi2: Skip system clock for RZ/V2H(P) SoC > > > > .../bindings/media/renesas,rzg2l-cru.yaml | 65 +++- > > .../bindings/media/renesas,rzg2l-csi2.yaml | 62 +++- > > .../platform/renesas/rzg2l-cru/rzg2l-core.c | 139 ++++++++- > > .../renesas/rzg2l-cru/rzg2l-cru-regs.h | 91 ++++-- > > .../platform/renesas/rzg2l-cru/rzg2l-cru.h | 39 ++- > > .../platform/renesas/rzg2l-cru/rzg2l-csi2.c | 165 ++++++++-- > > .../platform/renesas/rzg2l-cru/rzg2l-ip.c | 13 +- > > .../platform/renesas/rzg2l-cru/rzg2l-video.c | 295 ++++++++++++++++-- > > 8 files changed, 737 insertions(+), 132 deletions(-) > > -- > Regards, > > Laurent Pinchart
Powered by blists - more mailing lists