| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250423094058.1656204-4-tmyu0@nuvoton.com>
Date: Wed, 23 Apr 2025 17:40:54 +0800
From: a0282524688@...il.com
To: lee@...nel.org,
linus.walleij@...aro.org,
brgl@...ev.pl,
andi.shyti@...nel.org,
mkl@...gutronix.de,
mailhol.vincent@...adoo.fr,
andrew+netdev@...n.ch,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
wim@...ux-watchdog.org,
linux@...ck-us.net,
jdelvare@...e.com,
alexandre.belloni@...tlin.com
Cc: linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-i2c@...r.kernel.org,
linux-can@...r.kernel.org,
netdev@...r.kernel.org,
linux-watchdog@...r.kernel.org,
linux-hwmon@...r.kernel.org,
linux-rtc@...r.kernel.org,
linux-usb@...r.kernel.org,
Ming Yu <tmyu0@...oton.com>
Subject: [PATCH v10 3/7] i2c: Add Nuvoton NCT6694 I2C support
From: Ming Yu <tmyu0@...oton.com>
This driver supports I2C adapter functionality for NCT6694 MFD
device based on USB interface.
Each I2C controller uses the default baudrate of 100kHz, which
can be overridden via module parameters.
Signed-off-by: Ming Yu <tmyu0@...oton.com>
---
MAINTAINERS | 1 +
drivers/i2c/busses/Kconfig | 10 ++
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-nct6694.c | 184 +++++++++++++++++++++++++++++++
4 files changed, 196 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-nct6694.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 0564142a415e..751b9108524a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17362,6 +17362,7 @@ NUVOTON NCT6694 MFD DRIVER
M: Ming Yu <tmyu0@...oton.com>
S: Supported
F: drivers/gpio/gpio-nct6694.c
+F: drivers/i2c/busses/i2c-nct6694.c
F: drivers/mfd/nct6694.c
F: include/linux/mfd/nct6694.h
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 83c88c79afe2..e0938fed74f1 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1347,6 +1347,16 @@ config I2C_LJCA
This driver can also be built as a module. If so, the module
will be called i2c-ljca.
+config I2C_NCT6694
+ tristate "Nuvoton NCT6694 I2C adapter support"
+ depends on MFD_NCT6694
+ help
+ If you say yes to this option, support will be included for Nuvoton
+ NCT6694, a USB to I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called i2c-nct6694.
+
config I2C_CP2615
tristate "Silicon Labs CP2615 USB sound card and I2C adapter"
depends on USB
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index c1252e2b779e..e7fd9dc15c6c 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -134,6 +134,7 @@ obj-$(CONFIG_I2C_GXP) += i2c-gxp.o
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
obj-$(CONFIG_I2C_LJCA) += i2c-ljca.o
+obj-$(CONFIG_I2C_NCT6694) += i2c-nct6694.o
obj-$(CONFIG_I2C_CP2615) += i2c-cp2615.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PCI1XXXX) += i2c-mchp-pci1xxxx.o
diff --git a/drivers/i2c/busses/i2c-nct6694.c b/drivers/i2c/busses/i2c-nct6694.c
new file mode 100644
index 000000000000..d1ba64ec3f2e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nct6694.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nuvoton NCT6694 I2C adapter driver based on USB interface.
+ *
+ * Copyright (C) 2024 Nuvoton Technology Corp.
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/nct6694.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/*
+ * USB command module type for NCT6694 I2C controller.
+ * This defines the module type used for communication with the NCT6694
+ * I2C controller over the USB interface.
+ */
+#define NCT6694_I2C_MOD 0x03
+
+/* Command 00h - I2C Deliver */
+#define NCT6694_I2C_DELIVER 0x00
+#define NCT6694_I2C_DELIVER_SEL 0x00
+
+#define NCT6694_I2C_MAX_DEVS 6
+
+static unsigned char br_reg[NCT6694_I2C_MAX_DEVS] = {[0 ... (NCT6694_I2C_MAX_DEVS - 1)] = 0xFF};
+
+module_param_array(br_reg, byte, NULL, 0644);
+MODULE_PARM_DESC(br_reg,
+ "I2C Baudrate register per adapter: (0=25K, 1=50K, 2=100K, 3=200K, 4=400K, 5=800K, 6=1M), default=2");
+
+enum nct6694_i2c_baudrate {
+ NCT6694_I2C_BR_25K = 0,
+ NCT6694_I2C_BR_50K,
+ NCT6694_I2C_BR_100K,
+ NCT6694_I2C_BR_200K,
+ NCT6694_I2C_BR_400K,
+ NCT6694_I2C_BR_800K,
+ NCT6694_I2C_BR_1M
+};
+
+struct __packed nct6694_i2c_deliver {
+ u8 port;
+ u8 br;
+ u8 addr;
+ u8 w_cnt;
+ u8 r_cnt;
+ u8 rsv[11];
+ u8 write_data[0x40];
+ u8 read_data[0x40];
+};
+
+struct nct6694_i2c_data {
+ struct device *dev;
+ struct nct6694 *nct6694;
+ struct i2c_adapter adapter;
+ struct nct6694_i2c_deliver deliver;
+ unsigned char port;
+ unsigned char br;
+};
+
+static int nct6694_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct nct6694_i2c_data *data = adap->algo_data;
+ struct nct6694_i2c_deliver *deliver = &data->deliver;
+ static const struct nct6694_cmd_header cmd_hd = {
+ .mod = NCT6694_I2C_MOD,
+ .cmd = NCT6694_I2C_DELIVER,
+ .sel = NCT6694_I2C_DELIVER_SEL,
+ .len = cpu_to_le16(sizeof(*deliver))
+ };
+ int ret, i;
+
+ for (i = 0; i < num; i++) {
+ struct i2c_msg *msg_temp = &msgs[i];
+
+ memset(deliver, 0, sizeof(*deliver));
+
+ if (msg_temp->len > 64)
+ return -EPROTO;
+
+ deliver->port = data->port;
+ deliver->br = data->br;
+ deliver->addr = i2c_8bit_addr_from_msg(msg_temp);
+ if (msg_temp->flags & I2C_M_RD) {
+ deliver->r_cnt = msg_temp->len;
+ ret = nct6694_write_msg(data->nct6694, &cmd_hd, deliver);
+ if (ret < 0)
+ return ret;
+
+ memcpy(msg_temp->buf, deliver->read_data, msg_temp->len);
+ } else {
+ deliver->w_cnt = msg_temp->len;
+ memcpy(deliver->write_data, msg_temp->buf, msg_temp->len);
+ ret = nct6694_write_msg(data->nct6694, &cmd_hd, deliver);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return num;
+}
+
+static u32 nct6694_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm algorithm = {
+ .master_xfer = nct6694_xfer,
+ .functionality = nct6694_func,
+};
+
+static int nct6694_i2c_set_baudrate(struct nct6694_i2c_data *data)
+{
+ if (data->port >= NCT6694_I2C_MAX_DEVS) {
+ dev_err(data->dev, "Invalid I2C port index %d\n", data->port);
+ return -EINVAL;
+ }
+
+ if (br_reg[data->port] > NCT6694_I2C_BR_1M) {
+ dev_warn(data->dev, "Invalid baudrate %d for I2C%d, using 100K\n",
+ br_reg[data->port], data->port);
+ br_reg[data->port] = NCT6694_I2C_BR_100K;
+ }
+
+ data->br = br_reg[data->port];
+
+ return 0;
+}
+
+static int nct6694_i2c_probe(struct platform_device *pdev)
+{
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct nct6694 *nct6694 = dev_get_drvdata(pdev->dev.parent);
+ struct nct6694_i2c_data *data;
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->dev = &pdev->dev;
+ data->nct6694 = nct6694;
+ data->port = cell->id;
+
+ ret = nct6694_i2c_set_baudrate(data);
+ if (ret)
+ return ret;
+
+ sprintf(data->adapter.name, "NCT6694 I2C Adapter %d", cell->id);
+ data->adapter.owner = THIS_MODULE;
+ data->adapter.algo = &algorithm;
+ data->adapter.dev.parent = &pdev->dev;
+ data->adapter.algo_data = data;
+
+ platform_set_drvdata(pdev, data);
+
+ return i2c_add_adapter(&data->adapter);
+}
+
+static void nct6694_i2c_remove(struct platform_device *pdev)
+{
+ struct nct6694_i2c_data *data = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&data->adapter);
+}
+
+static struct platform_driver nct6694_i2c_driver = {
+ .driver = {
+ .name = "nct6694-i2c",
+ },
+ .probe = nct6694_i2c_probe,
+ .remove = nct6694_i2c_remove,
+};
+
+module_platform_driver(nct6694_i2c_driver);
+
+MODULE_DESCRIPTION("USB-I2C adapter driver for NCT6694");
+MODULE_AUTHOR("Ming Yu <tmyu0@...oton.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nct6694-i2c");
--
2.34.1
Powered by blists - more mailing lists