lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <D9E1EZA9E2MF.RMVBUAANS7EW@nvidia.com>
Date: Wed, 23 Apr 2025 22:03:30 +0900
From: "Alexandre Courbot" <acourbot@...dia.com>
To: "Danilo Krummrich" <dakr@...nel.org>
Cc: "Miguel Ojeda" <ojeda@...nel.org>, "Alex Gaynor"
 <alex.gaynor@...il.com>, "Boqun Feng" <boqun.feng@...il.com>, "Gary Guo"
 <gary@...yguo.net>, Björn Roy Baron
 <bjorn3_gh@...tonmail.com>, "Benno Lossin" <benno.lossin@...ton.me>,
 "Andreas Hindborg" <a.hindborg@...nel.org>, "Alice Ryhl"
 <aliceryhl@...gle.com>, "Trevor Gross" <tmgross@...ch.edu>, "David Airlie"
 <airlied@...il.com>, "Simona Vetter" <simona@...ll.ch>, "Maarten Lankhorst"
 <maarten.lankhorst@...ux.intel.com>, "Maxime Ripard" <mripard@...nel.org>,
 "Thomas Zimmermann" <tzimmermann@...e.de>, "Jonathan Corbet"
 <corbet@....net>, "John Hubbard" <jhubbard@...dia.com>, "Ben Skeggs"
 <bskeggs@...dia.com>, "Joel Fernandes" <joelagnelf@...dia.com>, "Timur
 Tabi" <ttabi@...dia.com>, "Alistair Popple" <apopple@...dia.com>,
 <linux-kernel@...r.kernel.org>, <rust-for-linux@...r.kernel.org>,
 <nouveau@...ts.freedesktop.org>, <dri-devel@...ts.freedesktop.org>
Subject: Re: [PATCH 09/16] gpu: nova-core: register sysmem flush page

On Tue Apr 22, 2025 at 8:45 PM JST, Danilo Krummrich wrote:
> On Sun, Apr 20, 2025 at 09:19:41PM +0900, Alexandre Courbot wrote:
>> A page of system memory is reserved so sysmembar can perform a read on
>> it if a system write occurred since the last flush. Do this early as it
>> can be required to e.g. reset the GPU falcons.
>> 
>> Signed-off-by: Alexandre Courbot <acourbot@...dia.com>
>> ---
>>  drivers/gpu/nova-core/dma.rs       | 54 ++++++++++++++++++++++++++++++++++++++
>>  drivers/gpu/nova-core/gpu.rs       | 53 +++++++++++++++++++++++++++++++++++--
>>  drivers/gpu/nova-core/nova_core.rs |  1 +
>>  drivers/gpu/nova-core/regs.rs      | 10 +++++++
>>  4 files changed, 116 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/gpu/nova-core/dma.rs b/drivers/gpu/nova-core/dma.rs
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..a4162bff597132a04e002b2b910a4537bbabc287
>> --- /dev/null
>> +++ b/drivers/gpu/nova-core/dma.rs
>> @@ -0,0 +1,54 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +
>> +//! Simple DMA object wrapper.
>> +
>> +// To be removed when all code is used.
>> +#![allow(dead_code)]
>> +
>> +use kernel::device;
>> +use kernel::dma::CoherentAllocation;
>> +use kernel::page::PAGE_SIZE;
>> +use kernel::prelude::*;
>> +
>> +pub(crate) struct DmaObject {
>> +    pub dma: CoherentAllocation<u8>,
>> +    pub len: usize,
>
> This should be covered by CoherentAllocation already, no? If it does not have a
> public accessor for its size, please add it for CoherentAllocation instead. I
> can take the corresponding patch through the nova tree.

`CoherentAllocation::count` is currently not accessible publicly. I
agree that exposing it would make sense, let me add a patch doing that.

>
>> +    #[allow(dead_code)]
>
> Please prefer #[expect(dead_code)], such that we are forced to remove it once
> it's subsequently used.

Ah, that's indeed more suitable, thanks!

>
>> +    pub name: &'static str,
>> +}
>> +
>> +impl DmaObject {
>> +    pub(crate) fn new(
>> +        dev: &device::Device<device::Bound>,
>> +        len: usize,
>> +        name: &'static str,
>> +    ) -> Result<Self> {
>> +        let len = core::alloc::Layout::from_size_align(len, PAGE_SIZE)
>> +            .map_err(|_| EINVAL)?
>> +            .pad_to_align()
>> +            .size();
>> +        let dma = CoherentAllocation::alloc_coherent(dev, len, GFP_KERNEL | __GFP_ZERO)?;
>> +
>> +        Ok(Self { dma, len, name })
>> +    }
>> +
>> +    pub(crate) fn from_data(
>> +        dev: &device::Device<device::Bound>,
>> +        data: &[u8],
>> +        name: &'static str,
>> +    ) -> Result<Self> {
>> +        Self::new(dev, data.len(), name).and_then(|mut dma_obj| {
>> +            // SAFETY:
>> +            // - The copied data fits within the size of the allocated object.
>> +            // - We have just created this object and there is no other user at this stage.
>> +            unsafe {
>> +                core::ptr::copy_nonoverlapping(
>> +                    data.as_ptr(),
>> +                    dma_obj.dma.start_ptr_mut(),
>> +                    data.len(),
>> +                );
>> +            }
>> +            Ok(dma_obj)
>> +        })
>> +    }
>> +}
>
> The DMA wrapper should probably be added in a separate patch.

Sure.

>
>> diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
>> index 1f7799692a0ab042f2540e01414f5ca347ae9ecc..d43e710cc983d51f053dacbd77cbbfb79fa882c3 100644
>> --- a/drivers/gpu/nova-core/gpu.rs
>> +++ b/drivers/gpu/nova-core/gpu.rs
>> @@ -3,6 +3,7 @@
>>  use kernel::{device, devres::Devres, error::code::*, pci, prelude::*};
>>  
>>  use crate::devinit;
>> +use crate::dma::DmaObject;
>>  use crate::driver::Bar0;
>>  use crate::firmware::Firmware;
>>  use crate::regs;
>> @@ -145,12 +146,30 @@ fn new(bar: &Devres<Bar0>) -> Result<Spec> {
>>  }
>>  
>>  /// Structure holding the resources required to operate the GPU.
>> -#[pin_data]
>> +#[pin_data(PinnedDrop)]
>>  pub(crate) struct Gpu {
>>      spec: Spec,
>>      /// MMIO mapping of PCI BAR 0
>>      bar: Devres<Bar0>,
>>      fw: Firmware,
>> +    sysmem_flush: DmaObject,
>
> Please add a doc-comment for this DmaObject explaining what it is used for by
> the driver and why it is needed.

Will do.

>
>> +}
>> +
>> +#[pinned_drop]
>> +impl PinnedDrop for Gpu {
>> +    fn drop(self: Pin<&mut Self>) {
>> +        // Unregister the sysmem flush page before we release it.
>> +        let _ = with_bar!(&self.bar, |b| {
>> +            regs::PfbNisoFlushSysmemAddr::default()
>> +                .set_adr_39_08(0)
>> +                .write(b);
>> +            if self.spec.chipset >= Chipset::GA102 {
>> +                regs::PfbNisoFlushSysmemAddrHi::default()
>> +                    .set_adr_63_40(0)
>> +                    .write(b);
>> +            }
>> +        });
>> +    }
>>  }
>>  
>>  impl Gpu {
>> @@ -173,6 +192,36 @@ pub(crate) fn new(
>>          devinit::wait_gfw_boot_completion(&bar)
>>              .inspect_err(|_| pr_err!("GFW boot did not complete"))?;
>>  
>> -        Ok(pin_init!(Self { spec, bar, fw }))
>> +        // System memory page required for sysmembar to properly flush into system memory.
>> +        let sysmem_flush = {
>> +            let page = DmaObject::new(
>> +                pdev.as_ref(),
>> +                kernel::bindings::PAGE_SIZE,
>> +                "sysmem flush page",
>> +            )?;
>> +
>> +            // Register the sysmem flush page.
>> +            with_bar!(bar, |b| {
>> +                let handle = page.dma.dma_handle();
>> +
>> +                regs::PfbNisoFlushSysmemAddr::default()
>> +                    .set_adr_39_08((handle >> 8) as u32)
>> +                    .write(b);
>> +                if spec.chipset >= Chipset::GA102 {
>> +                    regs::PfbNisoFlushSysmemAddrHi::default()
>> +                        .set_adr_63_40((handle >> 40) as u32)
>> +                        .write(b);
>> +                }
>> +            })?;
>> +
>> +            page
>> +        };
>> +
>> +        Ok(pin_init!(Self {
>> +            spec,
>> +            bar,
>> +            fw,
>> +            sysmem_flush,
>> +        }))
>>      }
>>  }
>> diff --git a/drivers/gpu/nova-core/nova_core.rs b/drivers/gpu/nova-core/nova_core.rs
>> index 878161e060f54da7738c656f6098936a62dcaa93..37c7eb0ea7a926bee4e3c661028847291bf07fa2 100644
>> --- a/drivers/gpu/nova-core/nova_core.rs
>> +++ b/drivers/gpu/nova-core/nova_core.rs
>> @@ -21,6 +21,7 @@ macro_rules! with_bar {
>>  }
>>  
>>  mod devinit;
>> +mod dma;
>>  mod driver;
>>  mod firmware;
>>  mod gpu;
>> diff --git a/drivers/gpu/nova-core/regs.rs b/drivers/gpu/nova-core/regs.rs
>> index fd7096f0ddd4af90114dd1119d9715d2cd3aa2ac..1e24787c4b5f432ac25fe399c8cb38b7350e44ae 100644
>> --- a/drivers/gpu/nova-core/regs.rs
>> +++ b/drivers/gpu/nova-core/regs.rs
>> @@ -14,6 +14,16 @@
>>      28:20   chipset => try_into Chipset, "chipset model"
>>  );
>>  
>> +/* PFB */
>> +
>> +register!(PfbNisoFlushSysmemAddr@...0100c10;
>> +    31:0    adr_39_08 => as u32
>> +);
>> +
>> +register!(PfbNisoFlushSysmemAddrHi@...0100c40;
>> +    23:0    adr_63_40 => as u32
>> +);
>
> Please add some documentation for the register and its fields.

Ack.

Thanks,
Alex.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ